Plate rolling machine

AKBEND AHS 20/25

Condition: used, Year of construction: 2020, CNC gantry plasma cutting machine Bledpfxox Dlwms Aqtoi with skew rotator beveling unit Manufacturer: Messer Type: Multitherm 4000 Year of manufacture: 2020 CNC control: Global Control Plus Working area: 3 x 10.8 m Track width: 4,000 mm 1 oxy-fuel torch ALFA 1 plasma torch with skew rotator beveling unit Power source: Hypertherm XPR300 Cutting thickness: 50 mm piercing 80 mm cutting Beuting extraction table without filter system Software: Omniwin with Bevel ä2726

Condition: excellent (used), Year of construction: 2008, overall weight: 120,000 kg, main lifting speed: 3 mm/min, working height: 10,000 mm, Double hoist 60 + 60 Ton Lifting class H2 Freqence vario speeds Hoist ABUS GM 7600U6 FEM Group 1Am Ikusi remote (TM70 2.13) Little used / Under power / Direct availebel Bjdjxmf R Sepfx Aqtoli Span: 31820mm Lift height: 10000mm Capacity Kg: 120000 Lifting speed:0,50 - 3,30 M/Min Hoist trolley:5/20 M/Min Crane driving:1/20 M/Min Length: 31820mm Width: 4500mm Height: 2300mm Weight: 86000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2007, condition: ready for operation (used), A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible. Bledpfjxp Rb Isx Aqtji

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Manufacturer: SMS MEER Type: RFA 14 Yom: 2000 Working range: tube Ø 21,3 – 114,3 mm Bodpfxoghrguo Aqtjli Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines.

Condition: new, Year of construction: 2026, roller (bottom) diameter: 220 mm, roller (top) diameter: 220 mm, side roll diameter: 180 mm, roller diameter: 220 mm, roller length: 2,070 mm, sheet thickness steel (max.): 10 mm, empty load weight: 4,500 kg, - 4 rolls - Capacity: 2070 x 10 mm - Bending capacity: 2070 x 8 mm - Hardened rolls - Top roll diameter: 220 mm - Bottom roll diameter: 220 mm - Side roll diameter: 180 mm - Hydraulic - Digital display for left roll movement - Digital display for central lower roll movement - Digital display for right roll movement Bedor H Df Ispfx Aqtsli - Hydraulic up and down movement system with intermediate and central roll - Hydraulic indicator for easy roll positioning - Hydraulic up and down movement system with intermediate and central roll - Top roll hydraulically swing-out - Steel construction ST-52 - Hydraulic drop-end for easy roll positioning - Hydraulic up and down movement system with central and side rolls - Hydraulic balancing system - Overvoltage protection - Documentation - 400V

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 150 mm, roller (top) diameter: 150 mm, side roll diameter: 140 mm, roller diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 18 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 2,800 kg, total length: 3,800 mm, total width: 1,200 mm, total height: 1,100 mm, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BENDING MACHINE NC HYDRAULIC MODEL 2000X6 MM / 4 MM PREBEND PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Capacity: plate width 2000 mm thickness rolling 6 mm pre-bending 4 mm minimum diameter of rolling D= 180 mm depending on the plate thickness and strength Rollers length 2050 mm Upper roll size 150 mm Lower roll size 150 mm Rollers hardened surface high strength smooth surface finishing suitable for rolling stainless steel quality plates Conical plate rolling attachment Rotation electric powered on central rollers for bending traction of the plate Pre-pinch load variable upon plate thickness and strength Console electric commands push buttons with digital readout of the 4 rollers on the screen. Bljdpsw Hpzwjfx Aqtji NC programmable 4-axis to set automatic rolling with save 200 programs in memory front side hydraulic opening to remove the rolled shells speed slow/fast variable safety installation with emergency stop. Instruction manuals for operation and service. Layout mm 3800x1200xH1100 mm Weight 2800 Kgs

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW Bledpfex Ii Hvex Aqtoi CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: refurbished (used), Year of construction: 2026, Conventional Lathe type TR 135B2 x 6m after general overhaul, equipped with a heavy tailstock and compound with T-slots. Technical data: Swing over bed: 1350 mm Swing over carriage: 1000 mm Distance between centers 6000mm Maximum workpiece weight between centers: 9,000 kg Bledpfx Aok Itipeqtei Maximum workpiece weight between centers with one steady: 10,500 kg Maximum workpiece weight between centers with two steadies 12,000 kg Special equipment included in the price of the lathe: - 4-jaws independent chuck dia. 1000mm - roller steady rest dia. 40-400mm - roller steady rest dia. 400-600mm - automatic lubrication for the carrriage, - lighting lamp, - cooling system.. 12 months material warranty.

Condition: excellent (used), Year of construction: 2009, Technical data: Working width: 2600 mm Bending capacity: 16.0 mm Pre-bending: 12.0 mm NC control Upper roller diameter: 330 mm Middle roller diameter: 290 mm Side roller diameter: 270 mm Conical bending device via inclined positioning of the side rollers Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (length x width x height): approx. 5100 x 2100 x 1800 mm Weight: approx. 12 tons Bodpfxeyg Eulo Aqtjli The seller is not liable for typographical or data transmission errors. The machine's condition, both visually and technically, as well as wear, is in accordance with its age; used machines are sold without any warranty.

Condition: new, Ostas 4-roll round bending machine 4R OHS 2070 x 220 Hydraulic side roller infeed Hydraulic folding bearing Hardened rolls Conical bending device Blodpfx Aetvn D Teqtsi Separate control panel Roller length : 2000 mm Top roller diameter : 220 mm Side roller diameter : 180 mm Total motor power : 4+3 KW Weight : 4900 kg Dimensions (mm) : 4050 x 1550 x 1470 (L x W x H) Performance data bending: 11 mm with smallest inner diameter (5 x top roll) 9 mm with smallest inner diameter (1.5 x top roller) Bending performance data: 9 mm with smallest inside diameter ( 5 x top roller ) 7 mm for the smallest inside diameter (1.5 x top roller) All bending capacities are calculated on the basis of 250 N/mm2 yield strength Material ( ST 37 - ST 42 structural steel ) Special accessories installed: Infinitely variable rolling speed: NC control: