Electric motor 90 kW 1480 rpm

AEG AM 280 MV4 Y4 Q4

Condition: excellent (used), Control : D.Electron Z 32 centre height 220 mm Centre distance 1000 mm turning Ø over bed 440 mm turning diameter over slide 245 mm Travel -Z axis 750 mm Casdpfx Asd Sitkebbea width of lathe bed 320 mm spindle mounting CL 6" spindle bore 62 mm spindle speeds 0 - 2000 rpm rapid traverse X/Z 7 m/min quill travel by hand 200 mm quill diameter 80 mm quill mounting MK 4

Condition: used, 30kw 280BAR 2 PIECES IN STOCK Cedpfx Abscl R Abobsaa

Year of construction: 2021, condition: new, Directly available from stock List on request Casdpfx Aoica Amebbea 550 pieces = 1x truck load ( 15000 kg theoretical weight / 13900 kg actual weight)

Condition: as good as new (ex-display), Year of construction: 2023, air pressure: 5.9 bar, Next-generation air plasma system that significantly simplifies system operation for cutting and gouging up to 32 mm. Features automated process setup using advanced RFID-enabled SmartSYNC torch and a revolutionary one-piece consumable cartridge that provides traceable usage data. Casdpfxjw U Stqs Abbsa Technical data: Cutting performance: Recommended cutting capacity: 32 mm - 500 mm/min Maximum cutting capacity: 38 mm - 250 mm/min Severance capacity: 50 mm - 125 mm/min Piercing: 22 mm Typical gouging: Metal removal rate: 8.6 kg per hour Gouge profile: 6.6 mm (D) x 6.0 mm (W) Scope of delivery: Power cable, H105 handheld torch 23 m, 75° Workpiece lead with clamp, Operating manual Option: Hypertherm cartridge reader, software

Condition: ready for operation (used), There are 26 motors available. Caedpfx Asikrb Isbbea

Year of construction: 2021, condition: ready for operation (used), A like new plasma cutter is available. Operating hours: 30h, open circuit voltage U₀: approx. 292V, output current I: 105A at 30A 92V–105A 122V at 92 or 122V under 30A, output voltage under load nominal HYP U₂ IEC U₂: approx. 160V at 100 percent power approx. 142–160V depending on standard, duty cycle at 30°C at 80 percent power 105A at X at 40°C, at 100 percent 94A or at other voltages, supply voltage input: three phase 3-PH multiple voltages possible 380–400V etc. U1 50/60Hz, protection class IP23CS, standards EN60974-1 EN60974-10 Class A GOST etc., power consumption P1: 14.9kW/h approx. 14.9kW, duty cycle at 40°C: 80 percent at 105A at certain voltages, 100 percent at slightly lower currents for example approx. 94A at higher voltages, other combinations depending on voltage and standard. Length with handles: 592mm, width: 274mm, height: 508mm, weight with torch 7.6m cable: 45kg. Table with sheet clamp, collection container and rail guide for the plasma cutter optionally available. An on-site inspection is possible. Casdpfexddaajx Abbsa

Condition: used, Year of construction: 2003, - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-fold tool turret VDI40 - Year of construction 2003 Technical data Cjdpfx Asuwrz Hsbbsaa Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore of main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: 5 - Spindle speeds: 2 - Constant cutting speed: 0-700 / 700-3000 rpm Feed rates: - Working feed Z/X: 0 - 7000 mm/min - Rapid traverse Z/X: 10 m/min Tailstock: - Tailstock shank Ø: 58 mm - Tailstock shank travel: 155 mm - Morse taper tailstock: 4 Motors: - Main motor power: 7.5 kW - DC motor Z-axis power: 12 Nm - DC motor X-axis power: 4 Nm - Motor pump power: 0.57 kW Dimensions: - Machine weight: approx. 2200 kg - Dimensions WxHxD: 2980 x 1730 x 1610 mm

Condition: good (used), BYSTRONIC HYDRAULIC BENDING MACHINE 3100X150 TON, MAX STROKE 315 mm, RAPID STROKE DOWN 190 mm/s, WORKING CYCLE 10 mm/s, RAPID STROKE UP 150 mm/s, DIMENSIONS: 415X200X290cm (h) WEIGHT 11,000 KG Y1 Y2: hydraulic cylinder axes. Codpfovxipgox Abbjaa X forward and backward axis of the register. R upward and downward axis of the register. Z1 and Z2 axes of the movement to the right and left of the stops. X1 or relative X which is the axis of the movement forward and backward of a single stop. 7 axes. The control also manages the hydraulic crowning, which can be considered the eighth axis.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: GM 3941/02, In total there are 3 x Grob BZ500 available (Please state your offer price) Sale only within Europe, incl. Turkey Price without packing; delivery condition: FCA (machine location) ===== Technical data see handout. Any warranty right is excluded. For the correctness of technical data and year of manufacture, for the completeness of accessories and tooling, as well as for the adherence to all safety as well as environmental protection requirements specified in the accident prevention regulations, we do not take over guarantee. No sale to private persons. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Cedpfxjmk Utre Abboaa Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Electric Motor WWE American Model !! Cajdpfx Abjc Sqvvjbea Type WWE250-18-449T 460 60Hz 250 HP (PS) 1790 RPM 282A IP55