Condition: excellent (used), Year of construction: 2001, For sale is a functioning and very well-maintained gas burner from the brand: Weishaupt Monarch WM G30/2-A 2100 kW with gas train, manufactured in 2001 Weishaupt Monarch WM G10/3-A 1000 kW and 900 kW with gas train Coln Neifk Tlstkfegt Weishaupt WM G20/2-A 1600 kW with gas train Weishaupt WM-G 10/4-A 1250 kW with gas train Weishaupt WM G30/2-A - Output: 300 - 2150 kW - Connection pressure: 15 - 500 mbar - Version: ZM - Year of manufacture: 2001 - Delivery is available upon request - All technical data can be seen in the pictures Priority sale to dealers, businesses, or exporters. All information is provided without guarantee; errors and prior sale are reserved. The seller assumes no liability for typing and data transmission errors.

Condition: used, Year of construction: 2018, Functionality: fully functional, heating capacity: 675 kW (917.74 HP), Complete biomass heating system based on wood pellets Brand wood pellet boilers: KWB Coln Ntev Uz Efskfjgt Type: Pelletfire Plus MF2S135 (135 kW) Number: 5 (cascade setup) Control: KWB control with online remote control Power range: 40 - 675 kW Year of construction: 2018 Thermal efficiency: 93% Filters: Yes, electrostatic filters are mounted in all flue ducts to collect fine dust Setup: 2 containers on top of each other The installation is complete and custom-made as a "stand-alone", so that the containers are on top of each other. The lower container contains the 5 biomass boilers with the control technology and the upper container contains the bulk stock for the wood pellets. A fuel compartment with a removal system and drop tube has been mounted per boiler. The installation is very well maintained and only certified wood pellets with the EN plus A1 quality mark have been used as fuel. The heating installation is currently stored in a preserved state. If you are seriously interested, the installation can be visited by appointment at the storage location near Rotterdam. Transport and commissioning in consultation. The steelwork that can be seen on the outside photo is not part of the installation. The biomass installation is suitable for, among other things: apartment complexes, apartment buildings with block heating, public swimming pools, large utility buildings, horticulture

Condition: used, Functionality: unexamined, Type: MTU 396 TC 34D Cgslnswffxvo Ntkfst With base frame 7320 kg dead weight 850 kV Engine: MTU Little mileage Regularly serviced Rewired Complete with radiator From foundation

Condition: good (used), Reznor UDSA gas air heater UDSA gas warm air heater - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation with CE system certification, version B or C Compact design for easy installation even heat distribution Vertical and horizontal air guide fins as standard Modulation of the heat output up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may carry out the installation of the gas WLE and the gas and flue gas connections. The gas WLEs are suitable for : - Natural gas or liquid gas operation - Recirculated air operation - Intake temperatures below 5°C with stainless steel heat exchanger * - 1-stage or 2-stage heating operation* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outer wall, version C ° Gas WLE type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. Nominal heat load (Hs) QN: 66.04 kW Cgeln Ntkowb A Hiefst Max. Nominal heat load (Hi) QN: 59.50 kW Min. nominal heat load (Hs) QN: 33.02 kW Min. nominal heat load (Hi) QN: 29.75 kW Max. Nominal heat output: 54.74 kW Min. nominal heat output: 26.92 kW Supply voltage: 230V 1N ,50Hz Air flow rate: 5830 m3/h Protection class: IP20 Pin no. 0461BN0677 Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: like new (used), Year of construction: 2022, operating hours: 2 h, Functionality: fully functional, frequency: 50 Hz, type of cooling: water, fuel: diesel, continuous power (apparent): 17 kVA, motor speed: 1,500 rpm, Equipment: documentation/manual, The HYUNDAI series of diesel engine generators is the core product of HYUNDAI Power Equipment Manufacturing Co., Ltd. Thanks to their excellent performance, the generators are widely used in the construction, communications, banking, mining, leasing, and other special locations. As you would expect, HYUNDAI generators strive to meet your needs according to the concept of individual design through the excellent features of safe, reliable, and clean operation. HYUNDAI Power generators are reliable and professional. The advantages of low noise levels, energy savings, and stable performance have provided credible assurance to many companies. Our generators provide the following services: Continuous service, standby service, and emergency service Cgjln Nev R Ifwotkfjt

Condition: ready for operation (used), Year of construction: 2004, Two boilers (Wolf and Buderus) and a heat pump (Walter Bösch) are available. 1) Wolf special oil/gas boiler, year of manufacture: 2004, heat output range: 17kW-20kW, max. operating pressure: 3bar, max. flow temperature: 110°C, water capacity: 51l. 2) Buderus S115 U boiler, heat output range: 21kW-23.1kW, operating pressure: 3bar, test pressure: 4.8bar, max. flow temperature: 120°C, water capacity: 50l. 3) Walter Bösch HB 6 LS heat pump, heat output: 16.2kW, compressor output: 4.4kW, operating current: 8.7A, starting current: 30A, refrigerant: R22, refrigerant quantity: approx. 6kg. Documentation available. On-site inspection is possible. Csln Newd Tarjtkfegt

Condition: excellent (used), Year of construction: 2013, WEISHAUPT WM-G10/3-A (with gas line) - Power: 100-1000 kW - Model: ZM Cgoln Ntkowgyrtefot - Year of manufacture: 2013

Condition: excellent (used), Functionality: fully functional, continuous power (apparent): 1,400 kVA, type of cooling: water, SDMO powered by mtu 12V4000 diesel engine. Coupled to Brushless Roy-Somer alternator. Power 1400 kva emergency, 3000 hours running only Comes with -engine & alternator on frame, complete control panel, radiator, and silencer. Emergency energy backup gen-set is in excellent condition. Celn Ntksv U Drhofogt

Condition: new, Year of construction: 2022, Multiple available! Brand Daewoo Model: DDAE10500DSE-3G Year of manufacture: 2022, New Capacity (KvA) 8,1 kVa (230v) / 7,5 kVa (400v) Motor brand Daewoo Engine model 500 Capacity engine (Kw) 15 Hp Fuel Diesel Voltage 230-400 Frequency (Hz) 50 Dimensions LxWxH (mm) 880 x 560 x 720 Cslnoiv Hf Ne Ntkfjgt Weight (Kg) ca 165 Number of pieces in stock 100+ Comments Max power: 8.1 kVA (400 V) 7.3 kVA (230 V) Rated power: 7.5 kVA (400 V) 6.7 kVA (230 V) Engine Power: 15hp Displacement: 498 cc Fuel tank capacity: 15 L Oil tank capacity: 1.65 L Run time 50% load: 12 hrs Power factor: 1.25 Socket: 1 x 16 A - 1 x 32 A Output 12V: ✓ Battery: 36 AH Noise level at 7M: 72 - 74 dBA Net weight: 165 kg Dimensions: 880 x 560 x 720

Condition: good (used), Reznor UDSA Gas Hot Air Generator Gas WLE Type: UDSA050-4E Gas appliance Type: BSP-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.90 mbar Max. Nominal heat load (Hs) QN: 58.60 kW Max. Nominal heat load (Hi) QN: 52.80 kW Min. nominal heat load (Hs) QN: Min. nominal heat load (Hi) QN: Max. nominal heat output: 48.58 kW Nominal heat output: 48.58 kW Min. nominal heat output: Supply voltage: 230V 1N ,50Hz Air flow rate: 5180 m3/h Protection class: IP20 Pin no. 0461BN0677 UDSA gas hot air generator - efficient right up to the peaks Cgeln Nswb Axrotkfst The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may install the gas WLE and connect the gas and flue gas side. The gas WLEs are suitable for: - natural gas or LPG operation - recirculation operation - intake temperatures below 5°C with stainless steel heat exchanger * - heating operation 1-stage or 2-stage* Control via room thermostat and heating control switch - ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outside wall, version C ° You can find more items - new and used - in our store! International shipping costs on request!

Condition: excellent (used), PIV frequency inverter (28272) Type S1T-1.5/400-M1,5 kw 380-440 volt Coln Ntkoh H Ecpefjgt 1,5 kw

Condition: ready for operation (used), Year of construction: 2007, A boiler system consisting of a Baumgartner boiler and a Weishaupt burner is available. 1) Standard boiler Duisburg. 2) Weishaupt RGL50/2-A burner, year of construction: 2007, version: ZM-NR, gas type: N, output min./max.: 600kW/5400kW, connection pressure min./max.: 15mbar/500mbar, heating oil min./max.: 95kg/453kg/h, electrical output: 16.59kW. Total system output: approx. 4000kg/h. Documentation available. On-site inspection is possible. Cjln Ntowd Ta Sskfsgt

Condition: excellent (used), Year of construction: 2011, WEISHAUPT WM-G10/3-A (with gas train) Cjlnewgyp Es Ntkfogt - Power: 125-900 kW - Year of manufacture: 2011 - Version: ZM-LN

Condition: new, -KLU 004- A V4A stainless steel enclosure unit of from Rittal is offers. Type: SO / HD 4000.009 Dimensions: P 175 x 250 x 35/21 cm distance to the recess of each side 60cm Distance from the bottom to the opening: 56 cm Distance from the top: 35 cm Please refer to everything else the pictures! Cgeln Ntjdxq T Dekfet Pick up is free of charge, shipping would be possible by forwarding only! You get a proper invoice with expelled VAT when purchasing Interest or questions, please register via the message function! By telephone we are accessible from 8 am-5 pm weekdays only!

Condition: good (used), Reznor UDSA gas hot air generator UDSA gas hot air generator - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heat output to up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. The installation of the gas WLE and the gas and exhaust gas connections may only be carried out by an approved installation company. The gas WLEs are suitable for: - Natural gas or LPG operation - Recirculation operation - Intake temperatures below 5°C with stainless steel heat exchanger * - Heating operation 1-stage or 2-stage* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outside wall, version C ° Gas WLE type: UDSA064-4E Gas appliance type: BSP-C12-C32-C52-C62 Destination: DE Cgoln Ntswb Amiokfot Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.90 mbar Max. Nominal heat load (Hs) QN: 77.69 kW Max. Nominal heat load (Hi) QN: 70.00 kW Min. nominal heat load (Hs) QN: Min. nominal heat load (Hi) QN: Max. nominal heat output: 64.40 kW Nominal heat output: 64.40 kW Min. nominal heat output: Supply voltage: 230V 1N ,50Hz Air flow rate: 6810 m3/h Protection class: IP20 Pin no. 0461BN0677 You can find more items - new and used - in our store! International shipping costs on request!

Condition: excellent (used), Frequency inverter Make PIV Elektronik Cjlneh H Eczo Ntkfsgt type S2T-5.50/400-M 380-440 volt 5,5 kw

Condition: excellent (used), Year of construction: 2017, WEISHAUPT WM-G10/A-4; With gas train -Power: 110-1250 kW - Year of manufacture: 2017 - Version: ZM Cjln Ntkewgym Defjgt

Condition: excellent (used), Year of construction: 2012, WEISHAUPT WM-G10/2-A -Version: ZM -Power: 65-630 kW Csln Ntjwgylyokfjgt -Year of manufacture: 2012

Condition: excellent (used), Year of construction: 2002, WEISHAUPT G7/1-D, gas burner with gas train. -Power: 250-1550 kW -Version: ZD-LN -Year of manufacture: 2002 Celnowgykco Ntkfjgt

Condition: excellent (used), Year of construction: 2001, WEISHAUPT L3T-A (top condition) - Power 120-775 kW - 10-65 kg/h - Year of manufacture: 2001 Cgjln Ntowgyifokfjt - Model: D-C

Condition: excellent (used), Year of construction: 2005, For sale are a functioning and very well-maintained Weishaupt RGL50/1-A (4640 kW) dual-fuel oil/gas burner, including gas valve, Dungs DN 80, manufactured in 2005. Weishaupt RGL50/1-A (4640 kW) - Output: 600-4640 kW - 95-390 kg/h - Version: ZM - Connection pressure: 15-500 mbar Cgslnewgk Ras Ntkfot

Condition: good (used), Year of construction: 1994, For sale are two Weishaupt dual-fuel oil/gas burners in very good condition (1750 kW) with control cabinet and gas train. Cgelowgk A Ajn Ntkfet Weishaupt GL 7/1-D Model: ZMD Year of manufacture: 1994 Output: 300 - 1750 kW 25 - 147 kg/h

Condition: excellent (used), Year of construction: 2008, For sale is a working and very well-maintained Weishaupt WM G20/2-A 1600 kW gas burner with gas train. Weishaupt WM G20/2-A - Output: 250 - 1600 kW - Supply pressure: 15 - 500 mbar - Model: ZM-LN - Year of manufacture: 200( Cgelnswgkpij Ntkfet

Condition: excellent (used), Year of construction: 2013, Description For sale is a working and very well-maintained Weishaupt gas burner, including a gas line (DN 65). 1. Burner type: WM-G30 Power: 600-5700 kW Version: ZM Year of manufacture: 2013 Celn Ntswgbq Dskfegt Connection pressure: 15-500 mbar

Condition: excellent (used), Year of construction: 2004, Description Celnewgbpao Ntkfogt For sale is a working and very well-maintained Weishaupt gas burner, including a gas line (DN 65). 1. Burner type: WM-G%0 Power: 550-4000 kW Model: ZM-NR Year of manufacture: 2004 Connection pressure: 15-500 mbar