Warnecke

Condition: excellent (used), machine/vehicle number: M100037, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 45 mm, spindle mount: MK 4, drilling depth: 250 mm, height adjustment type: mechanical, actuation type: mechanical, rotational speed (max.): 2,650 rpm, rotational speed (min.): 30 rpm, total width: 900 mm, total length: 1,900 mm, total height: 2,200 mm, table width: 760 mm, table length: 1,120 mm, overall weight: 1,800 kg, Equipment: CE marking, Radial drilling machine CARIMATI CTU 40/45 x 1000 in excellent general condition, fully functional, tested and ready for work. Main features: Drilling capacity: 45 mm Morse taper MK4 Spindle speed: 30 – 2650 rpm Automatic feeds: 0.05 – 0.3 mm/rev Spindle travel: 250 mm Carriage travel on arm: 1000 mm Power supply: 400V three-phase Complete with cube, vice, and quick-change chuck Column and head locking system Coolant system Machine CE compliant Iasdpfx Ajy Swdksagot Transport at buyer's expense. Loading onto truck will be carried out by us. Should custom/special packaging be required for transport, the relevant cost will be at the buyer's expense. Machine sold as seen.

Condition: excellent (used), Year of construction: 1999, power: 3 kW (4.08 HP), total width: 1,100 mm, total length: 2,600 mm, total height: 2,200 mm, table width: 800 mm, table length: 1,150 mm, overall weight: 1,800 kg, Radial arm drill Iaodpfsy Rznwsx Aagjt MAS - VO 32 MACH-ID 9618 Make: MAS Type: VO 32 Year: 1999 Arm Length: 1000mm Max. drill Ø cast: 40mm Max. tap Ø: 24M Max. drill Ø steel: 32mm Stroke pinole: 250mm Max. distance spindle - table:860mm Min. distance spindle - table:320mm Speeds / ranges: 4500Rpm Table Length: 1150mm Table Width: 800mm Power: 3kW Length: 2600mm Width: 1100mm Height: 2200mm Weight: 1800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1999, Drilling capacity in steel (diameter): 60 mm / MK5 Quill stroke: 310 mm Iasdoy Rm Ehspfx Aagjt Spindle speed: 28...2500 rpm Table size: 1470 x 986 mm Total power requirement: 4 kW Machine weight approx.: 4.6 t

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 40 mm arm length 1050 mm turning speeds 15 - 2800 U/min feed range 0,075 - 0,45 mm/min dimensions 2450 x 1300 x 2300 mm Weight 1500 kg Iaodpfey Nd T Hjx Aagjt

Condition: excellent (used), Metra TRL1000 Radial Drill – Power, Precision and Reliability for Your Workshop Metra TRL1000 radial drilling machine in excellent condition, ideal for those seeking a robust, precise machine ready to handle large workpieces. Perfect for mechanical workshops, steel fabrication, and maintenance departments looking to increase capacity and productivity. Main technical features: • Radial arm: 1000 mm • Column rotation: 360° Iedpoy Ib Tnofx Aagsat • Vertical arm travel: wide adjustment for tall workpieces • Spindle stroke: long, ideal for deep drilling • Drilling capacity: suitable for steel, stainless steel, and alloys • Spindle speed: multi-range mechanical selection • Automatic feeds: for drilling and tapping • Heavy cast-iron frame: maximum stability and rigidity • Large base: perfect for bulky components • Power supply: industrial three-phase Machine is ready to use, very quiet and stable. (Detailed photos available)

Condition: good (used), Drilling capacity: Ø 50 mm Spindle fitting: MT5 Spindle speeds: 18 - 2,000 rpm Spindle stroke: 400 mm Maximum horizontal arm travel: 1,250 mm Ijdpfx Aaoy Ia Azjgjat Maximum spindle to floor plate distance: 1,600 mm Equipped with: - Thread-cutting device - Drilling table Machine weight: 4,500 kg Machine dimensions (LxWxH): 2,800 x 1,000 x 3,500 mm

Condition: good (used), Year of construction: 1989, Ref. -No.: 10600 Manufacturer: G.BREDA Type: R 55 2000 Year of construction: 1989 Storage location: Halberstadt Country of origin: Italy Machine-No.: 16XXXXX Spindle Taper: MK 5 Clamping Area: 1000 - 1700 mm Automatic feeds: 0,06 - 1,00 mm / rev Spindle Speed: 30 - 1200 RPM Drive Capacity - Spindle Motor: 400 V / 5,5 kW Bore Capacity In Steel (Diameter): 55 mm Weight Of The Machine Ca.: 4800 t Dimensions Of The Machine Ca.: 2,99 x 1,12 x 2,85 m Drill spindle stroke: 240 mm Drilling performance reaming: 80 mm Iaodpfxjy Ed I Ae Aagst Thread cutting: M 40 approx. Further information: - Reach min. / max. / 320 / 2005 mm - Column diameter 360 mm - Boom stroke 855 mm - Spindle - base plate approx. 1000 - 1700 mm - E - Central clamping - Cube table - Hydraulic vice - Coolant device The machine can be viewed under power by arrangement.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, For sale: radial drilling machine currently undergoing a complete overhaul in our facility. After completion, the machine will meet all technical standards and parameters comparable to a new machine. The machine will be fully operational and available for testing under power. ✅ 12-month full warranty covering all mechanical components and electrical system Technical specifications: Max drilling capacity steel / cast iron: 75 / 85 mm Max tapping capacity steel / cast iron: M56 / M68 Max distance spindle – table: 2000 mm Min distance spindle – table: 390 mm Spindle taper: MK5 Spindle speed range: 12.5 – 1600 rpm Spindle stroke: 350 mm Mechanical spindle feed Power supply: 400V / 3-phase Electrically raised/lowered arm Electric arm clamping Motor power: 5.5 kW Iaedpfx Aajy D Sr Heget Dimensions & weight: Weight: approx. 7000 kg Dimensions (L x W x H): 3275 x 1170 x 3280 mm Machine condition: Fully rebuilt and modernized Condition comparable to a new machine Available for inspection under power ✅ 12-month full warranty covering all mechanical components and electrical system Terms of sale: Location: Poland Delivery: FCA Bydgoszcz Loading included in price

Condition: used, y-axis 1.000 mm table dimensions 1.000 x 600 mm bore depth 150 mm bore diameter 32 mm spindle tunring speed 30 - 2.650 U/min output 6 kw In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved. Isdpfx Asy A Tc Deagsat

Condition: ready for operation (used), Year of construction: 1994, overall weight: 7,000 kg, Arm length 1800 mm, drilling capacity 80 mm, weight 7000 kg Iedpoyzq Dpsfx Aageat

Condition: used, functionality: fully functional, Radial Drilling Machine WRA 40 x 1250 – used For sale: radial drilling machine WRA 40 x 1250 in good working condition. The machine is fully functional, connected to power and available for inspection under power. 🔧 Condition used (not overhauled) fully operational ready for testing inspection possible ⚙️ Technical data Drilling capacity steel/cast iron: 40 / 50 mm Arm reach: 250 – 1220 mm Spindle distance: 380 – 1580 mm Spindle stroke: 355 mm Spindle taper: MT4 Speed range: 20 – 2500 rpm Number of speeds: 15 Feed range: 0.063 – 2.5 mm/rev Motor power: 4 kW Machine weight: approx. 3600 kg 🧰 Equipment coolant system 24V lighting drilling table Isdpfx Aeyy Rcpsagjat Morse sleeves tools and documentation 📦 Terms price: on request location: Poland loading possible transport can be arranged

Condition: good (used), Year of construction: 1995, Used radial drilling machine from Foradia Iaedpfsytb Eyox Aaget Model: GR 50 1200 Arm length: 1200 mm Drilling capacity up to: 50 mm Year of manufacture: 1995

Condition: good (used), Year of construction: 1983, functionality: fully functional, Caser F50 radial drilling machine with quick-change chuck MK3. Iasdpfx Ajyrytysagot

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 30100 € 574.91 € 50 mm MK 5 360 - 1.250 mm 44 - 1.206 (12) U/min Stahl/Guß: M40/M50 2060 mm 995 mm 2240 mm 2300 kg 441 - 1.345 mm 0,06 - 0,2 (3) mm/min 3.7 kW 300 mm 270 mm 1.785 x 785 x 190 mm 0,75 kW 635 x 520 x 420 mm 2645 mm 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side Iedpfxoynmt Es Aagjat power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH

Condition: new, Year of construction: 2026, functionality: fully functional, New KAO MING hydraulic radial drilling machine, year of construction 2026. Specifications: Maximum distance between spindle center and column face: 1250mm Minimum distance between spindle center and column center: 360mm Column diameter: 350mm Column height: 2685mm Base floor space: 2035x840mm Total floor space: 2335x1140mm Base height: 188mm Spindle head longitudinal travel: 890mm Vertical arm travel: 700mm Spindle travel: 300mm Spindle taper: MK5 Table work area: 1393x820mm Main spindle motor: 3.7kW (5hp) Spindle speeds: 25–1310rpm (12 steps) Iaedpfjykkhxox Aaget Feed range: 0.06mm/rev to 1.12mm/rev (12 steps) Drilling capacity in cast iron: 60mm Drilling capacity in steel FC20/S45C: 50mm Weight: 3460kg

Condition: good (used), COLETT / Gamesa - Radial drilling machine, mobile use via crane - Arm approx. 1200mm Ijdpfx Ajyc Hkaoagjat - Universal angle head - Spindle speeds 95 - 750 rpm - Automatic feeds - Morse taper MK 4 - Arm height adjustable approx. 1400mm - Control cabinet - RETROFIT Dimensions: LxWxH 2x1x2.1 meters / Weight: 1600Kg Subject to errors and input mistakes

Condition: excellent (used), Year of construction: 1980, Horizontal gear hobbing and threading machine for gears, splined shafts, worm screws, threads, and pinions up to 5 meters in length, complete with 3 milling heads models APFW, APGS, APG, set of gears, various steadies, and indexing device. Iaodpfxsyba Rwe Aagjt

Condition: good (used), Breda radial drilling machine Type R 1220 MP 400 Volt, 3 kW Spindle taper MK 5 Iodpfx Aox Rt Ezsageat Arm length 1250 mm Speed 30–1200 rpm with swiveling table

Condition: ready for operation (used), functionality: limited functionality, drilling depth: 710 mm, rotational speed (max.): 1,250 rpm, table width: 1,250 mm, table length: 1,120 mm, spindle diameter: 100 mm, Placing a bid obligates you to collect the machine by the deadline of 28.01.2026! Prompt scheduling of an appointment is necessary after the end of the auction, as the machine has not yet been dismantled! TECHNICAL DETAILS Working spindle diameter: 100 mm Taper bore of working spindle: ISA steep taper No. 50 Drilling depth in one stroke: 710 mm Lowest position of spindle center above table surface: 0 mm Highest position of spindle center above table surface: 1,200 mm Maximum distance between spindle sleeve and tailstock: 2,300 mm Horizontal travel of tailstock: 1,300 mm Spindle speed: 6 - 1,250 rpm Clamping surface of the table: 1,120 mm x 1,250 mm Longitudinal travel of the table: 1,300 mm Ijdpfjx Hfugsx Aagoat Cross travel of the table: 1,200 mm 34 feeds for spindle, headstock, and table: 0.017 - mm/rev Stepless feeds for headstock and table: 20 - 1,000 mm/min Rapid traverse in all directions: 2,800 mm/min MACHINE DETAILS Main motor power: 11 kW Main motor speed: 1,450 rpm Power supply: Three-phase current Voltage: 380 Volt Frequency: 50 Hz EQUIPMENT Documentation incl. wiring diagram Electrical diagrams Operating manuals Note: Brake defective, clutch removed (included). Repair costs in Germany approx. €3,000.

Condition: used, Radial Drilling Machine GSP type 44 T 12 Spindle: CM4 Spindle exit: 300 mm Arm travel: 1000 mm Max height swivel table/spindle nose in height position: 700 mm Max height table/spindle nos ein height position: 1300 mm Swivel table +/- 90 Swivel table dimensions: 1000 x 400 mm Spindle motor: 3,7 kW False table Length 1000 mm x Width 800 mm Auto descent Mechanical locking Lubricant pump Iajdpfex Eb Rfjx Aaget Spindle rotation left/right Rotation at 360° around the column Voltage: 380 V Length: 2100 mm Width: 1000 mm Total height in height position: 2700 mm Total height in low position: 2400 mm Weight: approx 2,5 T

Condition: ready for operation (used), functionality: fully functional, drilling capacity: 40 mm, feed length X-axis: 1,015 mm, feed length Y-axis: 600 mm, spindle speed (max.): 2,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Drill holder mount: MK 4 Drilling capacity: 40 mm Table size: 1,445 mm x 810 mm X-axis: 1,015 mm Y-axis: 600 mm Spindle speed: 2,000 rpm Ijdpfx Asxwcyfoageat MACHINE DETAILS Space required (LxWxH): 0.82 m x 2.01 m x 2.5 m Machine weight: 2,815 kg

Condition: good (used), Year of construction: 2013, machine/vehicle number: 157098, Offer 25404 Technical Data: Iedpjxvzx Dofx Aagjat - Drilling capacity in steel ST 60: 32 mm - Boring capacity (enlarging): 40 mm - Drill spindle taper: MT 4 - Drill spindle stroke: 250 mm - Arm reach min / max: 200 / 1000 mm - Arm vertical travel: 600 mm - Min / max distance spindle - base plate: approx. 550 - 1060 mm - Machined base plate clamping area: W 700 - 800 mm - Spindle speeds: 71 - 1800 rpm - 4 feeds: 0.13 - 0.54 mm/rev - Drill spindle drive: 400 V / 2.2 kW - Cube table - Coolant system - Space requirement approx.: W 750 x H 2350 x D 1750 mm - Weight approx.: 1300 kg

Condition: used, Radial Drilling Machine OTTO MULLER Spindle: CM4 Spindle speed: from 70 to 1400 RPM Front table size: 1350 x 550 Back table size: 1000 x 400 mm Slide travel: 1000 mm Maxi distance spindle nose/front table: 600 mm Motor: 2 speeds Maxi column rise: 400 mm Auto descent Drilling/tapping function Spindle speed adjustment by belt variation Hydraulic locking Lubricant pump Iaodpfx Asxu Iareaget Voltage: 380 V Dimensions in low position: W 1500 x D 2400 x H 2300 mm Weight: approx 2 T

Condition: good (used), Year of construction: 1996, Radial drilling machine type Reform RB50x12 for sale in good condition. Iaedpoxftk Rsfx Aagjt Capacity: Max. 50mm in steel. Arm lenght: 1250mm Spindle distance to column min: 350mm Taper: MK5 Stroke: 315mm Spindle speeds: 25 – 2000 rpm, in 16 steps Feed rates: 0.04-3.2 mm/rev Main motor 3kW Weight: 3000kg Dimensions: 2150x1060x2840mm Machine clamps hydraulically, equipped with emergency stop. Under power in our warehouse.

Condition: used, Year of construction: 1985, Bohrleistung in Stahl (-Ø 45 mm throat 1250 mm workpiece height max. 1100 mm swival range ° height adjustment 745 mm base plate surface area 1450 x 920 mm Bohrspindel-Ø/ Aufnahme 90 mm / MK 5 bore spindle stroke 355 mm max. torque on the spindle 250 Nm feed power 14000 N turning speed range 20 - 1200 U/min feed range 0,063 - 0,63 mm/U power capacity 3,7 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m Isdpjxddqrefx Aagsat • cube table 650 x 650 x 500 mm, • coolant device