IT EUROPE s.r.o.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the winner to pick up the machine between September 21st and October 1st! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance from pallet surface to spindle center: -20 to 430 mm Distance from B-axis center to spindle center: -40 to 410 mm Distance from B-axis center to spindle center: -20 mm Distance from pallet center to Z zero point: 265 mm Distance from pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance from pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool interface: SK 40 Spindle taper: 7/24, Taper No. 40 Spindle bearing inner diameter: 70 mm Pjdpfxozqunho Agdjpw Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle orientation: Standard Tool clamping force: 7.0 kN Tool Changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free auxiliary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed Rates Rapid traverse rate, X/Y/Z-axis: 50 m/min Rapid traverse rate, B-axis: 30 min⁻¹ Rapid traverse rate, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Tipping feed rate, X/Y/Z-axis: 0 to 4000 mm/min Tipping feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. movement increment, X/Y/Z-axis: 0.001 mm Min. movement increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical Connection Values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and Weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT - Chip conveyor - Coolant system - Tool holders on the tool changer External Reference: Hanon - Lot 1

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, controller manufacturer: Fanuc, spindle nose: HSK 32, number of slots in tool magazine: 12, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, We are offering this used CHIRON FZ 08 S vertical machining center, manufactured in the year 2000. The machine was used for single-shift operation. As it is our only Fanuc machine, we are now selling it. Pjdjzqfynopfx Agdspw The machine has a memory expansion and was refurbished by Chiron in 2013. Unfortunately, no documents about this are available anymore after more than 10 years. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 420 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, torque: 90 Nm, controller manufacturer: FANUC, controller model: series 31i-B5, rotational speed (max.): 24,000 rpm, tool length: 200 mm, tool diameter: 60 mm, tool weight: 4,000 g, input voltage: 400 V, type of input current: three-phase, number of tool turrets: 1, number of tool stations in tool turret 1: 12, number of driven tool stations in tool turret 1: 12, Equipment: chip conveyor, CNC Machining Center CHIRON FZ12 MT TECHNICAL CHARACTERISTICS: Year of manufacturing: 2013 CNC control: FANUC series 31i-B5 Stroke X axis: 550 [mm] Stroke Y axis: 320 [mm] Stroke Z axis: 420 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] X/Y/Z axis acceleration: 10/12/15 [m/s] Max. bar diameter in turning spindle: 32 [mm] Main spindle max. speed: 8000 [rpm] Max. turning spindle torque: 90 [Nm] Max. counter spindle speed: 6500 [rpm] Counter spindle torque: 14.3 [Nm] Tool changer magazin number of stations: 24 Max. tool lenght: 200 [mm] Max. weight of single tool: 4 [Kg] Max. tool diameter: 60 [mm] Number of tool stations: 12 Number of tool stations driven: 12 Max. speed driven tools: 5000 [rpm] Milling head spindle attachment: HSK-A 50 Stroke B axis: -10 [°] / +100 Max. milling spindle speed: 24000 [rpm] Max. milling spindle power: 36 [kW] Max. milling spindle torque: 29 [Nm] Tool change time: 0.9 [sec] Chip to chip time: 2.4 [sec] Rated current: 125 [A] Total power required: 85 [kVA] Supply voltage: 400 [V] INCLUDED EQUIPMENT: 1 × High Speed Plus package 1 × LNS QUICK LOAD SERVO 80 S2 bar feeder 1 × KNOLL KF 150/500 paper band filtration unit 1 × 40 bar high-pressure coolant system 1 × Oil cooling unit 1 × KNOLL 600 K-1/200 chip conveyor 1 × RENISHAW workpiece probe 1 × RENISHAW TS27R tool setter 1 × ELBARON oil mist extraction unit Machine visible under power in our premises by appointment. Pedpfx Agszqbdiedopw Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas and Alzmetall, as well as CNC milling, drilling and tapping machines, and CNC grinding machines.

Condition: used, Year of construction: 2003, MAZAK NEXUS VCN 410A Year 2003 Travel in the X-axis: 560 mm Travel in the Y-axis: 410 mm Travel in the Z-axis: 508 mm Table length: 900 mm, Table width: 410 mm Ppsdpfx Aszpynkegdjw Tool magazine: 30 Spindle taper: CAT 40 Max. spindle speed: 12000 rpm Spindle motor power: 11 kW Documentation included Coolant tank with pumps

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 18199, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 210, TECHNICAL DETAILS CNC control: FANUC 30iM for 5-axis machining Working area Travel in X-axis: 550 mm Travel in Y-axis: 410 mm Travel in Z-axis: 450 mm Swivel range of B-axis: +110 to −110° Rotational range of C-axis: 360° Feed rate Rapid traverse rate for X, Y and Z axes: 50,000 mm/min Rapid traverse rate for B-axis: 30 min⁻¹ Rapid traverse rate for C-axis: 50 min⁻¹ Tool magazine Number of tool positions (standard): 30 Extension of the tool magazine: 210 tool positions Preparation for expansion to 240 tool positions Pallet system Number of pallets: 10 Pallet size: Ø 130 mm Pallet interface: Capto C6 Workpiece size: max. Ø 250 × H 250 mm Workpiece weight: max. 40 kg Pallet clamping force: 22.5 kN Main spindle Spindle speed: 40 – 20,000 rpm Motor power: 7.5/11 kW Spindle torque: max. 70 Nm up to 1,500 rpm Spindle interface: HSK 63A Special functions: High-speed start-up at machine start, Automatic warm-up cycle Pjdpozpyh Rofx Agdopw MACHINE DETAILS Machine weight: approx. 12,000 kg Coolant system Coolant pressure through the spindle: 70 bar Delivery rate of internal cooling: 24 l/min Pump capacity of internal cooling: 5.5 kW EQUIPMENT Direct linear scale from Heidenhain in the X, Y and Z axes Linear scale with pneumatic locking Direct linear scale via rotary encoder for the B and C axes CE marking KNOLL coolant system Drag chain chip conveyor Coolant filter CTS25-50T External cooling Coolant shower Compact filter KF200 Cooling water cooler VWK 90-D Coolant spray bars in the working area Two spiral chip conveyors Mechanical air filter TEBARON TEB/BV2 Single column with base plate for the air filter system Measuring probe Renishaw OMP 60 Software Easy Probe Pressure sensor for tool length measurement and tool breakage monitoring

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: MAZATROL, controller model: Matrix, table load: 300 kg, overall weight: 11,000 kg, spindle speed (max.): 3,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 60, number of axes: 5, This 5-axis Mazak VARIAXIS I 500 was manufactured in 2006. It features an X-axis travel of 510 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine includes a tool magazine capacity of 60 tools and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality milling capabilities, consider the Mazak VARIAXIS I 500 vertical machining centre we have for sale. Contact us for further details. • A: -120° / +30° • C: 360°Table • Dimensions: 500 × 400 mm • Number of tables/pallets: 2 • Spindle nose to horizontal table: 190–650 mm • Spindle nose to vertical table: 140–600 mmSpindle • Max torque: 252 NmTool magazine / ATC • Automatic tool changer: YesControl and software functions • Automatic pecking cycle with load detection • Synchronized tapping • EIA Dynamic Compensation 2 • Two additional M-code functions • G00 slope constant • High-speed function • MAZACC-3D high-speed software package • Shape compensation for rotary axes Additional equipment • Pallet changer (two pallets/tables) • Belt-type chip conveyor • Chip conveyor preparation with chip pan Pjdpfxjzpygao Agdspw • High-pressure coolant through spindle system (stated as 15 kg)

Condition: excellent (used), Year of construction: 2019, operating hours: 21,500 h, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 340 mm, travel distance Z-axis: 355 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece length (max.): 470 mm, workpiece width (max.): 400 mm, workpiece weight (max.): 500 kg, total height: 2,431 mm, total length: 2,069 mm, total width: 2,328 mm, table load: 500 kg, spindle speed (max.): 42,000 rpm, operating hours of spindle: 9,500 h, distance table to spindle center: 495 mm, spindle motor power: 13,000 W, number of spindles: 1, number of slots in tool magazine: 16, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, Milling spindle HVC140 HSK-E40 - Milling power S1/S6 40%: 10kW/13kW. Ceramic ball bearings with minimum oil air lubrication. Tool Changer 16 positions for HSK40E (tools until diam. 16 mm and maximum length of 75 mm. Ppjdpfxezpybwe Agdjw Tool measurement with Blum laser (annex on the left) with lasersystemm including tool breakage control. For measurment rotating tools of dia. 0,2 mm by dia. 16mm in the machine. Minimum tool length 45 mm. Tool presenting lapse. Preparation for graphite- extraction L-CUT for vacuum extraction system, consisting of enclosure, roof and pipe union. Graphite extration system. Included preparation for graphite extraction. Air throughput rate approx. 1400 m3/h. Motor output 2,2 kW, noise level approx. 73 dB (A). Rest dust content in exhaus air= max. 0,5 mg/m3. Dust contents are 15 times lower than the MAK values. Sound absorber fo L-CUT. Reducing of acoustic pressure level for approx. 9 dB (A) Remote control Heidenhain. Manual control with setup functions, electric hand wheel and enable button. Cooling system Hydac for spindle. Automatic lubrication system. Additional LED workroom lamp. Oil mist lubrication unit. Language English (system) Infrared probe Renishaw OMP 400 HSK 40 The machine will be disconnected and dismantled on 16 September 2026. Until then, it will remain connected and in active production. In July 2026, the ball screws, including the bearings, were replaced on the X and Y axes. All spindle filters and oil were also replaced. Our company is an authorized Exeron dealer and service partner. Therefore, the machine will be professionally disconnected and prepared for transport. The price also includes professional loading onto the truck and securing the machine on the truck for transport. The machine dimensions do not include the graphite extraction system. The complete layout is provided in the attached document.

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, total height: 2,500 mm, total length: 2,200 mm, total width: 2,000 mm, spindle speed (max.): 7,500 rpm, spindle motor power: 11,200 W, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 21, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, For sale is a robust and proven vertical CNC machining center, a Fadal VMC 2016L, equipped with the popular and easy-to-maintain Fadal CNC 88HS control. Ppsdpfxszpwcro Agdew A real highlight: The machine is equipped with a fully integrated 4th axis (Fadal VH65 rotary table). The machine can be inspected and demonstrated with short notice. The original manuals and complete technical documentation are available. Target group: Sale exclusively to commercial businesses (B2B). Warranty exclusion: The sale is made ex works with complete exclusion of any warranty, guarantee, or liability for defects by the seller. Sold as is, with all faults. The buyer expressly waives any claims for reduction, conversion, or damages. Handling & Transport: Dismantling, professional transport securing (blocking the axes), disconnecting the utilities (power/pneumatics), loading, and transport are all at the buyer's expense and risk (sale from foundation/location). The description of the machine serves only for general identification and does not constitute a warranty in the legal sense. The information is not claimed to be complete. Subject to changes, errors, and prior sale. All information without warranty.

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 410 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620 FS, table width: 375 mm, table length: 650 mm, table load: 250 kg, overall weight: 1,800 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 6,800 W, number of axes: 3, This 3-axis KUNZMANN WF 410 MC was manufactured in 2019. It features an X-axis travel of 410 mm, Y-axis travel of 350 mm, and Z-axis travel of 450 mm. The machine includes a table size of 650 × 375 mm and a maximum table load of 250 kg. If you are looking to get high-quality machining capabilities, consider the KUNZMANN WF 410 MC vertical machining centre we have for sale. Contact us for further details. • Control Unit Brand: HEIDENHAIN • Control Unit Model: TNC 620 FS • Table Size: 650 × 375 mm • Maximum Table Load: 250 kg • Spindle Taper: SK40 DIN ISO 7388-1 Form AD • Maximum Spindle Speed: 5,000 rpm • Spindle Power: 6.8 kW • Rapid Feed X/Y/Z: 5 / 5 / 5 m/min • Quill Stroke: 70 mm • Operating Voltage: 400 V • Mains Frequency: 50 Hz • Number of Phases: 3 • Connection Power: 13 kVA • Rated Current: 18 A • Main Fuse: 25 A • Short-Circuit Breaking Capacity: 10 kA • Control Voltage: 24 V • Machine Weight: Approx. 1,800 kg • Maximum Transport Weight: 2,025 kg Accessories: • Machine Enclosure with Safety Doors • Machine Light (LED Flexible Arm) • Central Lubrication System • Coolant System (66 L Tank) • Automatic Mechanical Tool Clamping Ppsdpszpaytofx Agdsw • Electronic Feed and Spindle Override Potentiometers • Electronic Handwheel HEIDENHAIN HR 510 FS • Probe Preparation Kit for TS 220 / TS 260 • 4th Axis Preparation Kit Extra Information: • Machine only used in training workshop • Fully refurbished in 2026 • 6-month warranty • Retrofitting and commissioning available on request at an additional cost Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: FANUC, controller model: Series 31i-MODEL B, table width: 400 mm, table length: 650 mm, table load: 300 kg, overall weight: 2,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 4,000 W, number of axes: 3, This 3-axis FANUC α-D21MiB was manufactured in 2022. It features a spindle speed of 10,000 rpm and a maximum tool storage capacity of 21 tools. The machine offers impressive X-axis travel of 500 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. If you are looking to get high-quality machining capabilities, consider the FANUC α-D21MiB vertical machining centre we have for sale. Contact us for further details. - Spindle Taper: BBT30- Spindle Load / Torque (High Torque 10,000 rpm): 80 Nm (1 min), 13.6 Nm (continuous)- Spindle Load / Power: 14.2 kW (1 min), 4 kW (continuous)- Z-Axis Travel: 330 mm (+100 mm High Column)- Distance from Spindle Nose to Table: 250 - 580 mm (with HC100)- Tool Storage Capacity (ATC): 21 tools- Tool Change Time (Cut-to-Cut): 1.6 s- Max. Tool Length: 250 mm- Max. Tool Diameter: 80 mm- Max. Tool Mass: 3 kg- Rapid Traverse (X/Y/Z): 54 m/min- Programmable Cutting Feedrate: 30,000 mm/min- Acceleration X/Y/Z: 1.4G / 1.0G / 1.6G- Positioning Accuracy (Bidirectional): < 0.006 mm- Repeatability (Bidirectional): < 0.004 mm- Air Pressure / Flow Consumption: 0.35 - 0.55 MPa / 150 L/min- Machine Weight: 2,000 kg (2,200 kg with DDR-TiB)- additional available accessories:* Transformer 20 kVA/IP23* High Column 100 mm* Top Cover High Column Parts HC100* Festo G3/8" Push-in Fitting 12mm for CTS Sealing* Festo 12mm Blanking Plug for CTS Sealing Ppedjzn Umxopfx Agdjw

Condition: excellent (used), Year of construction: 2012, Technical data: 3-axis machine: X, Y, Z Travel ranges (X/Y/Z): 635 / 510 / 460 mm CNC control: SIEMENS 840D Table size: 790 x 560 mm Max. workpiece weight: 600 kg Tool holder: SK 40 Number of positions in the tool changer: 30 Spindle speed: 20 – 12000 rpm Motor power: 13 kW Dimensions (length x width x height): approx. 3400 x 2450 x 2800 mm Machine weight: approx. 4.3 tons Condition: Ppodszn Ranepfx Agdsw very good condition, little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Year of manufacture: 12/2008 Control system: FANUC Series 31i-Model A5 Spindle taper: BT30 Tool magazine: 21 positions Machine weight: 2,100 kg Power supply: 3-phase, 200/220 V, 50/60 Hz Power consumption: 10 kVA CE marking: yes Country of origin: Japan Travel and working ranges X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 330 mm Rapid traverse X/Y/Z: up to 54 m/min Max. spindle speed: up to 24,000 rpm (as per nameplate) Max. table load: 300 kg Podpjznw Thefx Agdjpw Included accessories The machine includes approximately 50 collets of various sizes. The rotary table / 4th axis located in the machine is not included in the sale.

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] Ppodpfx Aoznnw Rogdew - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] - Cutting feed rates (X/Y/Z) : 1-30.000 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2325 [mm] - Machine weight : 2200 [kg] MACHINE HOURS - Number of hours under power : 33172 [h] - Number of working hours : 8569 [h] EQUIPMENT - CNC : Fanuc 31i-Model B5 - 3 colors status lamp - Type of divisor : 4e axe CNC intégré - Coolant tank - Coolant through spindle - Chips conveyor : ARRIERE - Oil mist extractor

Condition: used, Year of construction: 2007, Technical Specifications – STAMA MC 334 Manufacturer: STAMA Maschinenfabrik Model: MC 334 Year of Manufacture: 2007 Machine No.: KMM 334 2052 Electrical Data Connection Voltage: 400 V / 3 Phase / 50 Hz Nominal Current: 65 A Recommended Fuse: 3 × 80 A Minimum Connection Cable Cross Section: 35 mm² Total Connected Load: 125 kVA Total Power Requirement: 110 kW Spindle Tool Interface: HSK 63 Spindle Bearing Diameter: 65 mm Spindle Arrangement: a = 400 mm Maximum Torque: 200 Nm (20% duty cycle) Spindle Speed: 20 – 15,000 rpm Travels X-Axis: approx. 900 mm Y-Axis: approx. 900 mm Z-Axis: approx. 1,125 mm Ppedpoznc I Dofx Agdow Feed Rates Feed Rate (X/Y/Z): 1 – 10,000 mm/min Rapid Traverse: X-Axis: 60 m/min Y-Axis: 60 m/min Z-Axis: 60 m/min Maximum Feed Force X-Axis: 7,000 N Y-Axis: 7,000 N Z-Axis: 8,000 N Tool Magazine Magazine Capacity: 90 tools Tool Clamping Force: 8,000 N Maximum Tool Diameter: 160 mm Maximum Tool Length: 350 mm Tool Data Tool Dimensions: Standard Tool Weight: 1.8 kg Maximum Tool Weight: 12 kg (with every other pocket free) Maximum Tool Diameter: 300 mm Machining Capacity Maximum Milling Capacity: 600 cm³ Maximum Drilling Diameter: Ø40 mm Maximum Thread Size: M30 Machine Dimensions Length: 2,500 mm Width: 2,060 mm Height: 3,300 mm

Condition: refurbished (used), functionality: fully functional, 5-axis HSC milling machine Röders RXP500DS with linear direct drives in all axes and torque drives in the rotary axes. The machine will be completely overhauled, inspected, and measured in our workshop. The machine will once again meet new machine tolerances! Travel ranges: X450mm, Y400mm, Z240mm Distance spindle/table: approx. 315mm - Linear direct drives in all axes - wear-free - Tool changer, 42-position - Cooling unit for drives, milling spindle, and control cabinet - Measuring laser for fully automatic measurement of milling tools (length/diameter/contour/taper angle) as well as wear monitoring including tool cleaning before measurement - Handbox - Remote maintenance - Automatic 3D probe including calibration sphere in the tool changer Ppsdpfx Agjzmgt Isdjw - Minimum quantity lubrication - Emulsion cooling - Spindle HSK40E with max. 42,000 rpm - Spindle length compensation - Zero-point clamping system EROWA integrated into the machine table - Manual chuck control - Automation RC2 pallet changer for 45 Erowa ITS50 pallets - ideal for the production of electrodes An inspection of the machine in operational condition is possible at any time. You can also find information about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel.

Condition: good (used), Year of construction: 2008, QUASER Type MV154 PL / 12 Construction Year 2008 Description CNC and Control: Heidenhain iTNC 530 Axes: X: 1020 mm Y: 500 mm Z: 500 mm Table size: 1,200 x 500 mm Maximum table load: 500 kg Ppedpfx Agezl E Tdedow System: Cone and face contact Taper: BT40 Big-Plus Spindle: BIG-PLUS BT40 Spindle taper: SK40 / ISO 40 Spindle speed: 40 – 12,000 rpm Spindle motor power: 18.5 kW Working feed rate: 0 – 20,000 mm/min Rapid traverse: 40 m/min Tool magazine: 30 positions Automatic tool changer Through-spindle coolant (IKZ) Chip conveyor Programming: Conversational ISO Interface: Tool management Axis monitoring Simulation and execution Cooling System: External tank Grundfos pump Complete circuit Approx. dimensions: 2470 x 2540 x 2830 mm Approximate weight: 6.850 kg

Condition: used, Year of construction: 2004, emco VMC 300 D - CNC Milling Machine - SIEMENS Sinumerik 810D CNC Control - Tool magazine for 12 tools - CNC dividing head / 4th axis - Coolant system - 41,300 operating hours - Year of manufacture: 2004 Technical data Working area: - Travel in X-axis: 420 mm - Travel in Y-axis: 330 mm - Usable travel in Z-axis: 240 mm - Workpiece dimensions L x W x H: 400 x 300 x 190 mm - Distance between spindle nose/table surface: 210 - 450 mm Milling table: - Clamping area L x W: 850 x 325 mm - Max. table load: 150 kg - 3 T-slots according to DIN 650: 14 mm - T-slot spacing: 100 mm Milling spindle: - AC motor, power (100/60% duty cycle): 9 / 11 kW - Speed range (continuously variable): 0 - 5000 rpm - Sound pressure level at 5000 rpm: 72 dB A - Max. torque: 100 Nm Machining performance: - Milling performance in steel (16 Mn Cr5 - 790 N/mm²): 220 cm³/min - Drilling performance in steel: ø 25 mm - Thread cutting performance in steel: M20 Pedpfxszl D Awe Agdopw Feed drive (AC motor with individual drive + ball screw): - Feed rate in X/Y/Z axes: 0.01 - 12000 mm/min - Rapid traverse in X/Y/Z axes: 12 m/min - Feed force in X/Y axes: 6000 N - Feed force in Z axis: 8800 N - Resolution: 0.001 mm - Positioning accuracy X/Y/Z: 0.004 mm Tool system: - Tool magazine: Drum with direction logic - Number of tool stations: 12 - Insertion force: 6000 N - Max. permissible tool weight: 5 kg - Total permissible tool weight in magazine: approx. 36 kg - Max. tool diameter: 100 mm - Max. tool length: 220 mm - Chip-to-chip time according to VDI 2852 T1/T2/T3: 8.9 / 7.0 / 7.0 s - Tool change time (without traverse movements) T1/T2/T3: 5.8 / 3.9 / 3.9 s Lubrication system: - Guide rails & ball screw: automatic central oil lubrication - Main spindle bearing: grease lubrication Coolant system: - Tank capacity: 100 l - Max. flow rate: 10 l/min - Max. delivery pressure at 50 Hz: 3.7 bar - Coolant supply: 4 nozzles, external Electrical connection: - Power supply: 3/PE 400 V 50/60 Hz - Connected load: 15 kVA Pneumatic connection: - System pressure: 5 - 10 bar - Required minimum air flow (related to 1 bar): 750 l/min - Average air consumption (related to 1 bar): 180 l/min Dimensions: - Dimensions W x H x D: 2300 x 2450 x 2400 mm - Weight: approx. 2900 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 12647, travel distance X-axis: 510 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 15 kVA, controller manufacturer: Heidenhain, controller model: TNC 620, workpiece weight (max.): 400 kg, total height: 2,350 mm, total length: 2,250 mm, total width: 1,850 mm, table width: 320 mm, table length: 600 mm, table load: 300 kg, overall weight: 3,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 4,770 h, spindle motor power: 7,500 W, number of spindles: 1, number of slots in tool magazine: 16, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, LILIAN SVM-50 4-axis machining center Year of manufacture: 2010 Serial No. 12647 Travel distances (X x Y x Z): 510 x 410 x 460 mm with CNC rotary axis = 4th axis, with pneumatic clamping, 3-jaw chuck, counter bearing and electric hoist for lifting Control system: Heidenhain TNC620 including option for probing cycles and thread cutting without compensation chuck RS232 / RJ45 interfaces Dual-arm tool changer with 16 tools Direct drive spindle, oil-cooled, 12000 rpm SK40 DIN 69871 taper Rapid traverse X+Y+Z: 36 m/min Heidenhain glass scales X+Y+Z Heidenhain TS 440 probing system Handwheel Cabin with sliding door Work area lighting Coolant system Oil mist extraction Automatic central lubrication Ppjdpfxozlcldj Agdew 3-color alarm and status indicator 400V/50Hz, 15 KVA Compressed air requirement: 6 bar Weight: 3000 kg Dimensions W x D x H: 1850 x 2250 x 2350 mm Control system operating time: 15120 hours Spindle operating time: 4770 hours Optional: Various clamping tools SK40 (milling chuck, threading chuck, drilling chuck, shrink-fit chucks, milling cutter holders, etc.) Allmatic machine vise

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, x-axis travel 520 mm y-axis travel 360 mm z-axis travel 350 mm Spindle speed 12,000 rpm Spindle-to-base distance min./max. 150 - 500 mm Table surface 650 x 375 mm Tool weight max. 2.8 kg Table load 2 - 200 kg Control system Fanuc i Machine weight approx. 5,200 kg Dimensions 3,230 x 1,620 x 2,507 mm Equipment/Accessories: - Rigid tapping – thread drilling without a compensation chuck - 14-position tool magazine (T3600D) - Speed range 12,000 rpm Ppedpfjzk D Dfsx Agdew - Spindle speed and power display - Telescopic covers in the X, Y, and Z axes - Rapid traverse rates in the X, Y, and Z axes - Door safety switch - 3-color indicator light - Work area lighting - Coolant supply from the 200 l tank via adjustable coolant nozzles on the spindle nose - usable table load of 2 x 200 kg - 21-position tool magazine - Internal cooling - Machine cover, closed top / top cover - Oil skimmer - Pneumatic clamping, 1 pair per pallet - Automatic work area door with safety strip - Coolant system, delivery pressure 4.5 bar Operating hours: 14,317 h

Condition: used, Year of construction: 2012, FANUC Robodrill Fanuc 31i control X 500mm Y 400mm Podpjzktvkofx Agdepw Z 330mm Tool magazine with 21 positions for BT30 tools BT30 spindle taper Spindle speed: 24,000 rpm Lehmann EA510 5-axis rotary table Blum part probe Height probe on the table

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Ppjdpfjzkkgmex Agdow

Condition: good (used), Year of construction: 2001, functionality: fully functional, Vertical machining center, operator-attended machine with 3 axes Ppsdozkhlyspfx Agdew Manufacturer: UNITECH Germany Model: CFS 2 Year of manufacture: 2001 Control system: Heidenhain Travel range: X Y Z = 1500 x 300 x 300 Table size: 1800 x 350 mm Spindle power and speeds: 6000 rpm Tool holder: SK 40 Equipment: with internal spindle cooling Chip conveyor Design: Operator-attended machine

Condition: used, machine/vehicle number: J500111T, Hardinge Bridgeport Interact T450P Vertical Machining Centre Siemens 810D CNC Control Table Size: 500 × 400mm X-Axis Travel: 450mm Y-Axis Travel: 400mm Z-Axis Travel: 450mm Spindle Taper: BT40 Spindle Speed: 8,000 rpm Spindle Motor: 7.5/11 kW AC Spindle Motor ATC 20 Station Carousel Machine Weight: 2,500 kg Psdpfxjzkalfo Agdjpw Supplied with: 20 Station Automatic Tool Changer Electronic Handwheel (MPG) Coolant System Worklight Fully Enclosed Guarding Automatic Lubrication Interlocked Safety Door Three Colour Machine Status Beacon For Sale with Jet Machinery Ltd Jet Machinery Stock No: 79208 Machine Serial Number: J500111T Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 179, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: MSC 803, rotational speed (max.): 8,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 510 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Table size: 750 x 550 mm Spindle speed range: 8,000 rpm Spindle mounting: BT40 MACHINE DETAILS Psdpfx Agjzi D E Tsdepw Control system: MSC 803 Weight: 4,500 kg EQUIPMENT 25-position tool changer Coolant system

Condition: good (used), Year of construction: 2003, functionality: fully functional, Equipment: chip conveyor, I am selling a FAMUP MCL 120 E machine due to lack of space. Psdpfx Aszi Ddcjgdjpw