MPI-Solutions GbR

Condition: used, Year of construction: 2002, turning diameter 190 mm turning length 120 mm control MSG-501 max. swing diameter 250 mm Distance between centers 750 mm bar passage 40 mm x-axis 135 mm z-axis 450 mm y-axis ±40 mm spindle tunring speed 6.000 U/min number of tool places 16 Pos. Number of working hours ca. 1.230 h The machine is from its first owner and has low operating hours. It is very well maintained and can be inspected under power by appointment. Technical Features & Accessories: - Chip conveyor - Parts catcher and conveyor belt Itjdpfx Akj Aaq Ugjpen - High-pressure cooling - 16-station upper turret with Y-axis - Bar feeder interface - Hainbuch collets - Three-jaw chuck - Fixed and driven tool holders Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 2,350 h, travel distance X-axis: 308 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 4, This 4-axis DMG MORI CLX 550 V4 was manufactured in 2020. It features a turning length of 1,225 mm, X-axis travel of 307.5 mm, and Z-axis travel of 1,240 mm. The machine is equipped with live tools, a spray gun, a hand wheel, and a tool setter. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 V4 horizontal turning machine we have for sale. Contact us for further details. • C and Y axis • 102 mm spindle through-hole • Turning length: 1225 mm • Condition: Well maintained Additional equipment • Spray gun • Hand wheel (MPG) • Tool setter Iedpfoz Tqzzsx Akpstn Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2003, FOR SALE – LOT OF 8 MORI SEIKI CNC TURNING CENTERS Selling a single lot of 8 MORI SEIKI CNC turning centers, including: 8 MORI SEIKI CL-05 turning centers – year 2003. All machines are functional and complete, with their tools and tool holders. Iodpfx Asz Tqp Ejkpjtn Chip conveyors included. Selling the entire lot only. Photos and further information available upon request. Price for the lot available upon request.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 266 mm, travel distance Z-axis: 1,097 mm, controller manufacturer: HEIDENHAIN, controller model: Plus 4110, number of axes: 2, Horizontal turning machine manufactured in 2003. This DMT Kern CD480 features a main drive power of 17 kW and a total power requirement of 25 kW. Including tool turret with 12 positions and various VDI30 holders. If you are looking to get high-quality turning capabilities, consider the DMT Kern CD480 machine we have for sale. Contact us for further details. - Control Unit Model: Heidenhain Manual Plus 4110 (Type: BFT 121 G / LE 412 M) - Voltage / Frequency: 400 V / 50 Hz - Nominal Current: 45 A - Control Voltage: 24 V DC - X-Axis Feed Motor: 4.0 Nm (3000 rpm) - Z-Axis Feed Motor: 6.0 Nm (3000 rpm) - X-Axis Software Limit: -30.50 mm to +235.0 mm - Z-Axis Software Limit: -115.0 mm to +982.0 mm - Operating System / Software: Win98 4.10.2222, IPLC 41HD467 Technical Specification Itedpfx Akjz Sp Rlspsn Counter Spindle No Driven Tools No

Condition: ready for operation (used), WEISSER SÖHNE UNIVERTOR AC-2 High-precision, twin-spindle vertical CNC turning center. Complete and fully ready for operation. Iodpfxoz Sd D Is Akpjtn

Condition: used, Year of construction: 2024, Machine has 0 cutting hours Main spindle machining capacity Max. machining diameter: ø16 mm Max. machining length without re-chucking: 200 mm Max. front drilling diameter: ø10 mm Max. front tapping diameter: M8 Main spindle through-hole: ø20 mm Itedpfxsz R Szls Akpen Main spindle speed: max. 12,000 rpm Back spindle Max. back spindle chucking diameter: ø16 mm Max. back drilling diameter: ø8 mm Max. back tapping diameter: M6 Back spindle speed: max. 12,000 rpm Gang tool post (rotary tools) Max. drilling diameter ø5 mm, max. tapping diameter M5 Spindle speed: max. 8,000 rpm Turret (rotary tools) Max. drilling diameter ø5 mm, max. tapping diameter M5 Spindle speed: max. 8,000 rpm Number of stations: 10 + α Tooling Number of mountable tools: up to 32 + α Turning tools on gang tool post: 5 × 16 mm Rotary tools on gang tool post: 5–7 Back tool post: 5 fixed tools Drill sleeve: ø19.05 mm Collet, main and back spindle: 138E Guide bush: F605 Feed rates Rapid traverse, all axes (except X2 and Y2): 32 m/min X2 axis: 16 m/min Y2 axis: 8 m/min Motors Main spindle motor: 2.2 / 3.7 kW Back spindle motor: 0.75 / 1.5 kW Rotary tool drives (gang tool post and turret): 0.69 kW Control and dimensions Control: Mitsubishi Meldas M730 Dimensions (W × D × H): 2,780 × 1,340 × 1,790 mm Weight: 2,900 kg Center height: 1,150 mm Option: LFV technology (Low Frequency Vibration) for chip breaking The machine comes with 5 driven tool holders and one holder for the turret. Note that the machine does not come with barfeeder.

Condition: good (used), CNC turning machine WEILER DZ42 CNC. Year of manufacture 2001, serial number 173, CNC Siemens 840C, machine weight approximately 3,800 kg, with bar feeder HATEC AM9. Itjdjz R R Htopfx Akpsn

Condition: good (used), Year of construction: 1987, CNC turning machine WEILER Primus 2 CNC, serial number 151, CNC control system by Bosch. Iodpfoz R R Eisx Akpjtn

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 2,400 rpm, travel distance X-axis: 432 mm, travel distance Z-axis: 1,118 mm, spindle motor power: 29,800 W, overall weight: 11,000 kg, number of axes: 3, This 3-axis HAAS SL-40HE CNC turning center was manufactured in 2006. It features a maximum spindle speed of 2,400 rpm, a swing diameter over bed of 1,016 mm, and a Z-axis travel of 1,118 mm. The machine is equipped with a full-featured C-axis and driven tools, providing versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the HAAS SL-40HE machine we have for sale. Contact us for further details. • Swing over bed: 1,016 mm • Swing over cross slide: 635 mm • Max. bar capacity: 101.6 mm • C-axis: Full-featured C-axis • Tool presetter: Yes • Spindle nose: A2-8 • Spindle bore: approx. 116.8 mm • Gearbox: 2-speed • Chuck: Kitagawa B-15, 3-jaw • Vector drive: 40/30 HP closed-loop vector drive • Electrical enclosure: NEMA Type 1 (indoor use only) • Voltage: 360/480 V • Phase: 3 • Frequency: 50/60 Hz • Full load: 40 A • Largest load: 70 A • Short-circuit interrupting capacity: 10,000 A • Machine status: Dismantled, not under power; seller can load on truck with crane for approx. €800 Additional equipment • Iscar Fast Feed Tools tooling/solutions (as indicated by stickers) • Work light • Coolant tank and chip tray assembly • Foot pedal control • Status beacon light Technical Specification Counter Spindle No Itsdoz Ryqmepfx Akpsn Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2008, operating hours: 58,985 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 385 mm, overall weight: 3,500 kg, number of axes: 2, Horizontal turning machine manufactured in 2008. This Mazak Quick Turn Nexus 100-II features a maximum turning diameter of approximately 280 mm and a turning length of about 335 mm. It includes a 12-position drum turret and a programmable tailstock. Known defects: Spindle fault: Alarm "44 SPINDEL ERROS 3" - Machine must warm up before machining, then operational. Repair costs according to quote approx. 2,800 EUR. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Nexus 100-II machine we have for sale. Contact us for further details regarding this machine. Ijdpfx Aksz Rxg Hepjtn Turning Length: Approx. 335 mm (Z-travel approx. 385 mm) - Turning Diameter: Max. turning diameter approx. 280 mm - Swing Diameter: Approx. 550 mm - Number of Turrets: 1 turret, 12-position drum turret (Bolt-on type) - Tool Holder / Mounting: Mazak block mounting (Bolt-on), various tool adapters and tool holders included - Tailstock: Available (Programmable) - Main Spindle: Without C-axis - Main Spindle Speed: 6,000 rpm - Spindle Nose: A2-5 - Spindle Bore: Approx. 61 mm - Main Drive Power: Approx. 11 / 7.5 kW - Bar Capacity / Pass-Through: Ø 51 mm (Standard chuck 6" / 152 mm, 3-jaw hydraulic) - Optional (not included): Various tool adapters and holders, clamping equipment, Hainbuch clamping technology - Chip Conveyor: None - Documentation: Available - Demonstration Status: Operational under power (after warm-up phase) - Known Defects: Spindle fault Alarm "44 SPINDEL STÖRUNG 3" - Machine must warm up before machining, then operational. Estimated repair cost approx. 2,800 EUR. - Machine Weight: 3,500 kg (7,700 lbs) - Main Circuit Voltage: 3AC 400 V 50/60Hz - Control Circuit Voltage: AC 100V / DC 24V - Max Main Motor Voltage: 400 V Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2017, operating hours: 15,186 h, Equipment: documentation/manual, We are offering this used INDEX ABC 65 SL CNC lathe, manufactured in 2017. Machine type: ABC Year of manufacture: 2017 Operating hours (hydraulics): 15,186 Turret 1 with 7 stations, VDI 25, and W-gearing Synchronous spindle with chuck or collet possible! Turret 2 with 6 stations and dovetail mounting Powered tools on turret 2 Ejection blowing device Transmit function – Teleservice Three rear boring spindles for fixed tools Magazine above the main spindle Conveyor belt Chip conveyor, hinged belt – workpiece removal device – workpiece feed unit INDEX LMI bar feeder magazines If you have any questions or require further information, please feel free to send us a message or call us. Itjdpsz Ri Ibjfx Akpsn

Condition: ready for operation (used), Year of construction: 2011, operating hours: 44,137 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 330 mm, number of axes: 2, Horizontal turning machine manufactured in 2011. This Mazak Quick Turn Smart 100 S (QTS 100 S) features a maximum turning diameter of approximately 280 mm and a turning length of about 308 mm. It includes a 12-position drum turret for efficient tool changes and a programmable tailstock. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Smart 100 S machine we have for sale. Contact us for further details. MAZAK Quick Turn Smart 100 S (2011) - INFO- Main Spindle C-Axis: Without C-axis Iedpfx Akjz N Hdwjpetn - Control: Mazatrol Smart (10.4" Color LCD) - Operating Hours: 44,137 hours - Turning Length: approx. 308 mm (Z-travel approx. 340 mm) - Turning Diameter: max. approx. 280 mm - Swing Diameter: approx. 584 mm - Turret: 1 Turret, 12-position drum turret (Bolt-on type), index time 0.17 s - Tool Holder: Mazak block holder (Bolt-on), various tool adapters / tool holders included - B-Axis (stepless 0.001°): No - Tailstock: Yes, programmable tailstock (centering point MT 4) - Main Spindle Speed: 6,000 rpm (Spindle nose A2-5, drive approx. 11 / 7.5 kW) - Bar Loader: No (Defective) - Bar Capacity / Passage: Ø 42 mm (Standard chuck 6" / 152 mm, 3-jaw hydraulic) - Optional (not included) Various tool adapters, tool holders, clamping devices, and set of collets - Chip Conveyor: No Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 1992, operating hours: 60,000 h, spindle speed (max.): 3,000 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: FANUC, controller model: Series 15 T, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 1992. This Monforts RNC 5 features a maximum turning diameter of 340 mm and a turning length of 1000 mm. It is equipped with a control system from Fanuc Series 15 T and offers 12 tool positions for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 5 machine we have for sale. Contact us for further details. - Typical Workpiece Materials: Case-hardening steel - Typical Workpiece Components: Shafts, gears - Production Environment: Single parts and small series- Max. Swing Diameter over Bed: 600 mm- Swing Diameter over Bed Slide: 450 mm- Max. Turning Diameter: 340 mm- Max. Turning Length: 1000 mm- Turning Diameter Range: 50 - 250 mm- Number of Tool Positions: 12 tools- Driven Tools Power: 4.5 kW- Driven Tools Speed: 3000 rpm- Counter Spindle: No (Single main spindle machine)- Material Clearance / Spindle Bore: 85 mm- Bar Capacity Max.: 78 mm- Chuck Work Max Weight: 25 kg- Center Work Max Weight: 35 kg Technical Specification Iodpfx Akez N Hbcjpjtn Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 3,200 rpm, travel distance X-axis: 239 mm, travel distance Z-axis: 1,080 mm, spindle motor power: 29,800 W, overall weight: 5,443 kg, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2022. This HAAS ST-28L features a chuck size of 12.0 in (305 mm) and a maximum part swing of 21.0 in (533 mm). It offers a maximum cutting length of 42.5 in (1080 mm) and a spindle power of 40.0 hp (29.8 kW). If you are looking to get high-quality turning capabilities, consider the HAAS ST-28L machine we have for sale. Contact us for further details. • Working hours: 0 (Showroom machine) • Chuck size: 12.0 in (305 mm) • Max part swing: 21.0 in (533 mm) • Max cutting diameter (with BOT turret): 13.00 in (330 mm) • Max cutting diameter (with BMT65 turret): 11.75 in (298 mm) • Max cutting length: 42.5 in (1080 mm) • Bar capacity: 4.00 in (102 mm) • Rapids X/Z: 945 ipm (24.0 m/min) • Max thrust X: 4100 lbf (18238 N) • Max thrust Z: 5100 lbf (22686 N) • Spindle nose: A2-8 • Spindle torque (max): 425.0 ft-lbf @ 325 rpm (576.0 Nm @ 325 rpm) • Spindle bore: 4.62 in (117.3 mm) • Turret: 12-station BOT • Boring bar rear clearance: 4.00 in (102.0 mm) • Coolant capacity: 55 gal (208 L) • Air required: 4 scfm @ 100 psi (113.0 L/min @ 6.9 bar) • Inline air hose & coupler: 3/8 in • Minimum air pressure: 80 psi (5.5 bar) • Input AC voltage (3-phase): 220 VAC / 440 VAC • Full load amps (3-phase): 70 A (220 VAC) / 35 A (440 VAC) • Shipping dimensions: 190.0 x 90.0 x 90.0 in (483 x 229 x 229 cm) Technical Specification Counter Spindle No Driven Tools Yes Itodpfsz N Ergex Akpjn

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 3,400 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 572 mm, spindle motor power: 22,400 W, overall weight: 5,580 kg, number of slots in tool magazine: 12, number of axes: 3, This 3-axis HAAS ST-25Y was manufactured in 2022. It features a maximum cutting diameter of 11.75 in and a maximum cutting length of 22.5 in. The machine is equipped with a 10 in chuck size and a robust spindle speed of 3400 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-25Y horizontal turning machine we have for sale. Contact us for further details. • Working hours: 0 (showroom machine) • Chuck size: 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 11.75 in / 298 mm • Max cutting length: 22.5 in / 572 mm • Bar capacity: 3.00 in / 76 mm • Rapids (X / Y / Z): 472 ipm (12.0 m/min) / 472 ipm (12.0 m/min) / 945 ipm (24.0 m/min) • Max thrust (X / Y / Z): 4100 lbf (18238 N) / 2300 lbf (10231 N) / 5100 lbf (22686 N) • Spindle nose: A2-6 • Max spindle torque: 300.0 ft-lbf @ 500 rpm / 407.0 Nm @ 500 rpm • Spindle bore diameter: 3.50 in / 88.9 mm • Main spindle C axis max rating: 5.0 hp / 3.7 kW • Main spindle C axis max speed: 60 rpm • Main spindle C axis positioning: ± 0.01° • Main spindle C axis brake diameter: 13.9 in / 353 mm • Main spindle C axis brake holding torque: 250 ft-lbf / 339 Nm • Sub-spindle chuck size: 5.3 in / 135 mm • Sub-spindle nose: A2-5 • Sub-spindle max speed: 6000 rpm • Sub-spindle max sync speed with main spindle: 3400 rpm Iodpfez N Dmvjx Akpstn • Sub-spindle chuck throat: Ø 1.30 in x 1.37 in deep / Ø 33.0 mm x 34.8 mm deep • Sub-spindle drawbar bore (non-through): Ø 1.00 in x 4.50 in deep / Ø 25.4 mm x 114.3 mm deep • Sub-spindle bore (without chuck and drawbar): 1.50 in / 38.1 mm • Sub-spindle integrated brake torque: 17 ft-lbf / 23 N·m • Sub-spindle orientation accuracy: ± 0.02° • Sub-spindle rapids (B-axis): 400 ipm / 10 m/min • OD vs ID tools: Any combination • Boring bar rear clearance: 4.00 in / 102.0 mm • Live tooling max speed: 4000 rpm • Live tooling interface: BMT65 • Coolant capacity: 55 gal / 208 L • Air requirements: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline air hose and coupler: 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Drive system: Direct speed, belt drive • Electrical requirements: Low 220 VAC @ 70 A / High 440 VAC @ 35 A (3 Phase) • Shipping dimensions (domestic): 142.0 in x 90.0 in x 92.0 in / 361 cm x 229 cm x 234 cm Technical Specification Driven Tools Yes Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,900 W, overall weight: 6,550 kg, controller manufacturer: SIEMENS, controller model: 828D, number of slots in tool magazine: 12, number of axes: 6, This 6-axis DOOSAN PUMA 2600 SY II was manufactured in 2020. It features a maximum turning diameter of 376 mm and a turning length of 760 mm. The machine is equipped with a powerful spindle speed range of 20–4,000 rpm and a robust turret with 12 tool stations. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 2600 SY II horizontal turning machine we have for sale. Contact us for further details. • Controlled axes: X, Z, Y, B, C1, C2 • Slant bed: 30°Travels and rapid traverse • B-axis (sub-spindle) travel: 830 mm • C1-axis: ±360° • C2-axis: ±360° • Rapid traverse (X / Z / Y / B): 30 / 30 / 10 / 30 m/minMain spindle • Spindle nose: ASA A2-8 • Hydraulic chuck: 254 mm, 3-jaw • Max. torque: 730 Nm • Spindle bore: 91 mm • Drawtube ID: 82 mm • Integrated built-in spindle motor • C1 positioning resolution: 0.001°Sub-spindle • Spindle nose: ASA A2-5 • Hydraulic chuck: 170 mm, 3-jaw • Speed range: 60–6,000 rpm • Motor power: 18.2 kW • Max. torque: 220 Nm • Spindle bore: 62 mm • Drawtube ID: 50 mm • Built-in motor • C2 positioning resolution: 0.001° • Part ejector stroke: 120 mmMachining capacity • Max. swing over bed: 780 mm • Max. swing at front door: 680 mm • Max. swing over carriage: 630 mm • Max. turning diameter: 376 mm • Max. turning length between centers: 760 mm • Max. bar capacity, main spindle: 81 mm • Max. bar capacity, sub-spindle: 49 mm • Off-center milling capacity (Y-axis): 105 mm (±52.5 mm) • Max. cantilever workpiece weight: 260 kg • Max. workpiece weight using sub-spindle: 520 kgTurret and driven tools • Turret type: BMT-65 • Turret indexing positions: 24 • Tool stations: 12 (all 12 driven) • Indexing time: 0.15 / 0.65 sec • Turning tool size: 25 × 25 mm • Boring tool capacity: Ø50 mm / Ø32 mm • Driven-tool speed: 50–5,000 rpm • Driven-tool power: 4.1 / 7.79 kW • Max. driven-tool torque: 79.8 Nm • ER-32 capacity: Ø3–20 mm • Rigid tapping: Yes Itodpfx Asz N Dhtjkpen Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 4,500 rpm, travel distance X-axis: 215 mm, travel distance Z-axis: 440 mm, controller manufacturer: FANUC, controller model: 21i-T, number of slots in tool magazine: 12, number of axes: 3, This 3-axis Cincinnati HAWK 200 was manufactured in 2004. It features a turning length of 500 mm and a maximum turning diameter of 250 mm. The machine is equipped with a FANUC 21i-T CNC control and has a turret capacity of 12 tools. If you are looking to get high-quality turning capabilities, consider the Cincinnati HAWK 200 CNC lathe we have for sale. Contact us for further details. • Turning length: 500 mm • Maximum turning diameter: 250 mm • Swing over bed: 400 mm Iodoz N A U Sopfx Akpotn • Swing over cross slide: 380 mm • Spindle bore: 63 mm • Driven tools: Yes, 6 driven tools Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2023, spindle speed (max.): 6,000 rpm, travel distance X-axis: 200 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 406 mm, spindle motor power: 11,200 W, number of axes: 3, This 3-axis HAAS ST-10Y was manufactured in 2023. It features a maximum cutting diameter of 11.00 in and a maximum cutting length of 16.0 in. The machine is equipped with a 12-station turret and offers rapid movements of up to 1200 ipm on the Z-axis. If you are looking to get high-quality turning capabilities, consider the HAAS ST-10Y horizontal turning machine we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Chuck Size: 6.5 in / 165 mm • Max Part Swing: 16.5 in / 419 mm • Max Cutting Diameter: 11.00 in / 279 mm (with BMT45 turret) • Max Cutting Length: 16.0 in / 406 mm • Bar Capacity: 1.75 in / 44 mm • Rapids on X: 472 ipm / 12.0 m/min • Rapids on Y: 472 ipm / 12.0 m/min • Rapids on Z: 1200 ipm / 30.5 m/min • Max Thrust X: 2400 lbf / 10676 N • Max Thrust Y: 2300 lbf / 10231 N • Max Thrust Z: 3700 lbf / 16458 N • Spindle Nose: A2-5 • Spindle Max Torque: 75.0 ft-lbf @ 1300 rpm / 102.0 Nm @ 1300 rpm • Draw Tube Bore ø: 1.81 in / 46 mm • Spindle Bore ø: 2.31 in / 58.7 mm • Main Spindle C Axis Max Speed: 60 rpm • Main Spindle C Axis Positioning: ± 0.02° • Sub-Spindle Chuck Size: 5.3 in / 135 mm • Sub-Spindle Max Speed: 6000 rpm • Tailstock Taper: MT3 • Tailstock Hydraulic Quill Travel: 3.8 in / 95 mm • Turret Stations: 12 Stations (BMT45) • Live Tooling Max Speed: 4000 rpm • Coolant Capacity: 30 gal / 114 L • Air Required: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Shipping Weight: 7900 lb / 3584.0 kg Additional equipment • Robot Package Max Load Capacity at Wrist: 15.4 lb / 7 kg • Robot Package Reach: 35.9 in / 911 mm • Robot Package Repeatability: 0.0004 in / 0.010 mm • Robot Single Gripper Max Part Weight: 7.9 lb / 3.6 kg • Robot Dual Gripper Max Part Weight: 5.0 lb / 2.3 kg per gripper Technical Specification Itedpfxjz Nz T Ho Akpsn Counter Spindle Yes Driven Tools No

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 2,400 rpm, travel distance X-axis: 508 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 711 mm, spindle motor power: 29,800 W, overall weight: 9,253 kg, number of axes: 4, This 4-axis HAAS ST-40SY was manufactured in 2025. It features a maximum part swing of 35.5 in and a maximum cutting diameter of 27.5 in. The machine is equipped with a 12-station turret and live tooling capabilities, allowing for versatile machining operations. If you are looking to get high-quality turning capabilities, consider the HAAS ST-40SY horizontal turning machine we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Chuck Size: 15.0 in / 381 mm • Max Part Swing: 35.5 in / 902 mm • Max Cutting Diameter (with BMT75 turret): 27.50 in / 699 mm • Max Cutting Length: 28.0 in / 711 mm • Bar Capacity: 4.00 in / 102 mm • X Axis Rapids: 472 ipm / 12.0 m/min • Y Axis Rapids: 472 ipm / 12.0 m/min • Z Axis Rapids: 710 ipm / 18.0 m/min • Max Thrust X: 5500 lbf / 24465 N • Max Thrust Y: 2300 lbf / 10231 N • Max Thrust Z: 9000 lbf / 40034 N • Spindle Nose: A2-8 • Drive System: 2-Speed Gearbox • Spindle Max Torque: 1400.0 ft-lbf @ 150 rpm / 1898.0 Nm @ 150 rpm • Spindle Bore ø: 4.62 in / 117.3 mm • XP Option Drive System: 2-Speed Gearbox • XP Option Max Rating: 55.0 hp / 41.0 kW • XP Option Max Speed: 2400 rpm • XP Option Max Torque: 2100.0 ft-lbf @ 150 rpm / 2847.0 Nm @ 150 rpm • Main Spindle C Axis Max Rating: 5.0 hp / 3.7 kW • Main Spindle C Axis Max Speed: 49 rpm • Main Spindle C Axis Positioning: ± 0.01 ° • Main Spindle C Axis Brake Diameter: 21.5 in / 546 mm • Main Spindle C Axis Brake Holding Torque: 450 ft-lbf / 610 Nm • Tailstock Taper: MT5 • Tailstock Travel: 26.0 in / 660 mm • Tailstock Max Thrust (Acme): 3,000 lbf / 13,345 N • Tailstock Min Thrust (Acme): 200 lbf / 890 N • Turret Number of Tools: 12 Stations • Turret Index Time (one tool): 2 s • Turret Tooling: BMT75 • Live Tooling Max Speed: 4000 rpm • Live Tooling Tooling: BMT75 • Coolant Capacity: 95 gal / 360 L • Air Requirements: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline Air Hose: 3/8 in • Air Pressure Min: 80 psi / 5.5 bar • Input AC Voltage (3 Phase) - Low: 220 VAC • Full Load Amps (3 Phase) - Low: 70 A (Standard) / 105 A (XP Option) • Input AC Voltage (3 Phase) - High: 440 VAC • Full Load Amps (3 Phase) - High: 35 A (Standard) / 53 A (XP Option) • Domestic Pallet Dimensions: 217.0 in x 95.0 in x 116.0 in / 551 cm x 241 cm x 295 cm Itedpfez Nx Rcsx Akpsn • Export Crate Dimensions: 217.0 in x 95.5 in x 120.5 in / 551 cm x 243 cm x 306 cm • Export Crate Weight: 22,141 lb / 10,043.0 kg Additional equipment • Chip conveyor • Remote jog handle / CNC control pendant • Auto-door feature • Eppinger Preci-Flex live tooling holders • Samchully 3-jaw chuck • Tool setter / touch probe • Coolant/air blow hose Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2021, EMCO E350, SIEMENS 828D, 10,000 RPM 3-axis CNC milling machine with integrated 20-position tool magazine. Control: SIEMENS 828D Spindle: Speed: 10,000 RPM Spindle power: 7 kW Torque: 41 Nm Tool holder: SK30 ISO7388-1 (DIN 69871) Pull stud: ISO7388-3 (DIN69872 Type A) Travel: X=350mm, Y=250mm, Z=300mm Spindle nose to table distance: 120-420mm Rapid traverse X, Y, Z: 24 m/min Table: Cast iron table with T-slots Number - Width - Pitch: 5 - 12 - 45 Clamping area: 520 x 300 mm Ijdpfx Asz Nm A Tskpotn Maximum table load: 100 kg Tool changer: Drum magazine with 20 tool positions Tool change time (tool to tool): 2.5 seconds Coolant: Standard pump 3.5 bar Work area lighting: Via 1 halogen spotlight Standard equipment: o Central lubrication o Thread cutting without collet o Spindle blow-out device for cleaning the tool holder during tool changes o Coolant tank 140 liters o Vibration-damping leveling feet o Mounting angles and heavy-duty anchors Year of manufacture: 2021 Machine No. Q4A211601 Includes: Control language: Italian NC handwheel, portable Fastening material ET420/345/332 E45/65 MT45/65 Leveling element FK03/NBR05/NBR9014 Heavy-duty anchor FH18x80/50 B M12 Fastening material High-pressure coolant system 50Hz Coolant gun Warning light, LED, 3-way, side-mounted E350 Operating manual / ITALIAN

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 285 mm, travel distance Z-axis: 1,000 mm, number of axes: 2, Horizontal turning machine manufactured in 2020. This JESSEY MJ1840 features a swing over bed of 460 mm and a distance between centres of 1000 mm. It is equipped with an 80 mm spindle bore and a D1-8 Camlock spindle nose. If you are looking to get high-quality turning capabilities, consider the JESSEY MJ1840 machine we have for sale. Contact us for further details. - Compound Rest Travel: 120 mm- Swing Over Bed: 460 mm (18")- Swing Over Cross Slide: 285 mm- Distance Between Centres: 1000 mm (40")- Spindle Bore: 80 mm- Spindle Nose: D1-8 Camlock- Tailstock Total Travel: 170 mm- Accessories / Equipment: Quick-change tool post / 4-way tool post, chip pan/tray, chuck guard, splash guard, coolant device Itedpfoz Nkkuox Akpen Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,065 mm, spindle motor power: 22,000 W, overall weight: 6,500 kg, number of axes: 3, Horizontal turning machine manufactured in 2014. This Okuma LB3000EXII features a maximum turning diameter of 340 mm and a turning length of 1,000 mm. It has a swing over bed of 580 mm and a maximum workpiece weight of 250 kg. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000EXII machine we have for sale. Contact us for further details. Capacities • Swing over bed: 580 mm • Swing over longitudinal carriage: 470 mm • Distance between spindle centers: 1,020 mm • Max turning diameter: 340 mm • Max turning length: 1,000 mm • Max workpiece weight between centers: 250 kgMain spindle • Spindle diameter: 120 mm • Spindle nose: JIS A2-6 (optional JIS A2-8) • Spindle bore: 80 mmAxes • Z rapid: 30,000 mm/min • X rapid: 25,000 mm/min • Feed range X/Z: 0.001–1,000 mm/revTurret • Type: V12 • Tool stations: 12 • Suitable for turning or driven tools (L- or M-tools) • External tool size: 25 × 25 mm • Internal tool size: Ø40 mmDriven tools / C-axis • Driven-tool speed: 45–6,000 rpm • C-axis range: 360° • C-axis indexing increment: 0.001° • C-axis rapid speed: 200 rpmTailstock Itodpez Ni D Tjfx Akpjn • Taper: MT No. 5 • Travel: 1,015 mm • Motor: 2.9 kWElectrical / auxiliary • Hydraulic unit pump: 2.2 kW • Lubrication pump: 0.018 kW • Coolant pump: 0.25 kW (side chip discharge) / 0.8 kW (rear chip discharge) • Supply voltage (manual): 200 V • Transformer voltages: 220 / 240 / 380 / 415 / 440 / 480 V • Frequency: 50/60 Hz • Electrical cabinet protection: IEC IP54 Technical Specification Counter Spindle No Driven Tools Yes

Condition: refurbished (used), functionality: fully functional, Weiler Primus lathe with lead screw and drive spindle. Includes tailstock. Ijdpfoz Nh Epox Akpstn The machine can be inspected while powered on prior to purchase. Shipping is possible for an additional charge. VAT can be shown separately.

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 3,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, spindle motor power: 22,400 W, overall weight: 6,804 kg, number of slots in tool magazine: 12, number of axes: 3, This 3-axis HAAS SL-30THE was manufactured in 2007. It features a maximum swing over the front cover of 762 mm and a maximum cutting diameter of 432 mm. The machine offers a cutting length of 864 mm and a spindle speed of 3400 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS SL-30THE horizontal turning machine we have for sale. Contact us for further details. • Max swing over front cover: 762 mm • Max swing over cross slide: 381 mm • Max cutting diameter: 432 mm • Max cutting length: 864 mm • Spindle bore: 88.9 mm • Max torque: 407 Nm @ 700 rpm • Spindle nose (standard): A2-6 • X-axis rapid feed: 18.0 m/min • Z-axis rapid feed: 18.0 m/min • Number of tool stations: 12 • Outside/inside turning tool size: 25 mm • Bore size for turning tools: 50 mm • Tool change time (adjacent tool): 1 s • Tool change time (opposite tool): 3 s • Electrical supply / power requirement: 28 kVA • Voltage: 380 V, 3-phase • Air requirement: 113 l/min @ 6.9 bar • Coolant tank capacity: 189 l Itodpfxsz I Ryfs Akpon Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,245 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 406 mm, spindle motor power: 11,200 W, total height: 2,060 mm, total width: 1,780 mm, overall weight: 3,600 kg, controller manufacturer: HAAS, controller model: NGC, product length (max.): 3,200 mm, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2019. This HAAS ST-10 features a maximum turning diameter of 229 mm and a maximum turning length of 355 mm. It includes a spindle power of 11.2 kW and a maximum spindle speed of 6,000 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-10 machine we have for sale. Contact us for further details. Main spindle • Spindle nose: A2-5 • Max bar capacity: 44 mm • Max turning diameter: 229 mm • Max turning length: 355 mm • Max swing over bed: 413 mmTurret and axis travels • Number of tool positions: 12Tailstock • Type: Manual • Quill taper: MT3 • Tailstock travel: 508 mm • Quill travel: 95 mmElectrical supply Ijdjz Izyiopfx Akpstn • Voltage: 440 V (per machine nameplate) • Phases: 3Options included: • Measuring probe • 175 mm three-jaw chuck • Hainbuch SK52 collet chuck Technical Specification Counter Spindle No Driven Tools No Taper Size VDI 40