Thomas Fischer

Condition: used, Year of construction: 2018, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Sommer, 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of ... Bsdpfx Afe Ahxytjmelp

Condition: good (used), functionality: fully functional, mileage: 69,444 km, power: 132 kW (179.47 HP), first registration: 07/2024, fuel type: diesel, empty load weight: 2,240 kg, maximum load weight: 1,260 kg, overall weight: 3,500 kg, next inspection (TÜV): 12/2027, fuel: diesel, fuel tank capacity: 90 l, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,070 mm, loading space width: 1,870 mm, loading space height: 1,932 mm, Year of construction: 2024, trailer load unbraked: 3,000 kg, number of previous owners: 1, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, additional headlights, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, hill-start assist, immobilizer system, lane keeping assist, non-smoking vehicle, onboard computer, parking sensors, power assisted steering, rear view camera, second-hand vehicle warranty, sliding door, soot filter, start-stop system, tire pressure monitoring, traction control, trailer coupling, truck registration, AHK-3.0t Rear wing doors (opening angle 260/270 degrees) Reinforced rear axle (suspension) Full-size spare wheel (including spare wheel holder) Visibility-Plus package Traction control Electrically adjustable exterior mirrors Extended exterior mirrors Brake assist Eco package Electronic parking assist Intelligent speed assistant Emergency brake assist Lane keeping assist Traffic sign recognition Electrically operated front windows Speed control system (cruise control) including speed limiter DAB (Digital Audio Broadcasting) Acoustic reversing warning (external warning signal) Blodpfxo Ahxylo Afmop Start/Stop system Rear-view camera Permissible total weight 3.50 t

Condition: as good as new (ex-display), Year of construction: 2021, KraussMaffei KM 160-750 PXA Injection Molding Machine Manufacturer: KraussMaffei Model: KM 160-750 PXA Year of Manufacture: 2021 Machine Type: Electric Injection Molding Machine Clamping Force: 1600 kN / 160 tons Screw Diameter: 50 mm Control System: KraussMaffei MC Agile Robot: KraussMaffei LRX Machine Description We offer a KraussMaffei KM 160-750 PXA injection molding machine, manufactured in 2021, with a clamping force of 1600 kN (160 tons), equipped with a KraussMaffei LRX linear robot. The machine features a 5-point, double-toggle clamping unit with a three-platen design, with servo-electric driven axes. The injection unit is equipped with electric drives responsible for injection, plasticizing, and the movement of the injection unit. The modern KraussMaffei MC Agile control system utilizes real-time Ethernet technology, enabling precise control of the production process. The machine is equipped with a complete plasticizing unit with a 50 mm diameter screw. TECHNICAL DATA Clamping Unit Bjdpfx Aj Ahxyhefmslp Clamping Force: 1600 kN / 160 tons Mold Opening Force: 240 kN Clamping System: 5-point, double-toggle, three-platen design Clamping Drive: servo-electric Mounting Plate Dimensions (H × V): 770 × 720 mm Column Spacing (H × V): 570 × 520 mm Mold Opening Stroke: 450 mm Minimum Mold Height: 300 mm Maximum Mold Height: 600 mm Maximum Daylight Between Platens: 1050 mm Ejector Speed: 300 mm/s Injection Unit Screw Diameter: 50 mm L/D Ratio: 20.2 Maximum Injection Pressure: 1892 bar Injection Volume: 393 cm³ Injection Weight: 357 g Injection Speed: 200 mm/s Volumetric Injection Rate: 393 cm³/s Screw Speed: 267 rpm Plasticizing Rate: 36.5 g/s Nozzle Radius: 10 mm Nozzle Orifice Diameter: 4 mm Injection Drive: electric Plasticizing Drive: electric Injection Unit Movement Drive: electric Electrical Equipment Control System: KraussMaffei MC Agile Connected Power: 31.2 kW Installed Heating Power: 15.5 kW Number of Adjustable Cylinder Heating Zones: 5 Dry Cycle Time / Stroke according to EUROMAP 6: 1.86 s / 399 mm Linear Robot Manufacturer: KraussMaffei Series: LRX Type: Linear robot for injection molding machine service Application: Automation of part removal and handling Machine Dimensions and Weight Length: 5650 mm Width: 1820 mm Height: 1950 mm Net Weight: 8500 kg / 8.5 t

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, power: 63 kW (85.66 HP), overall weight: 5,260 kg, drilling depth: 122,000 mm, TECHNICAL DETAILS Traction force: max. 89 kN (approx. 9.1 t) Thrust force: max. 75.6 kN (approx. 7.7 t) Torque: max. 2,980 Nm Spindle speed: max. 225 rpm Drilling depth: approx. 122 m (depending on ground conditions) Pilot hole diameter: min. approx. 102 mm Drill string length: approx. 3,050 mm Drill string diameter: 52 mm Drill string connection diameter: 67 mm Drill string magazine capacity: approx. 122 m Drilling angle: 10–14° MACHINE DETAILS Engine: Cummins 4-cylinder turbo diesel Displacement: 3.3 l Engine power: 63 kW (approx. 85 hp) Flushing pump flow rate: max. 120 l/min Flushing pump pressure: max. 103 bar Fuel tank volume: 114 l Hydraulic oil tank volume: 72 l Dimensions & Weight Dimensions (L x W x H): approx. 5,260 x 1,310 x 2,390 mm Bedpfx Afo Ahxyaomolp Operating weight: approx. 5,260 kg EQUIPMENT Enclosed operator cabin with joystick control Hydraulic drill string changer with drill string magazine Hydraulic clamping and breaking device Integrated drilling flushing pump Hydraulic anchoring system Ditch Witch ESID warning system Electronic 750 display Rubber track undercarriage External cable control Drill string, partially stored separately Various drilling and reaming tools Drill string connections and adapters Accessory and tool box Operating manual JT2020 Mach 1 Spare parts manual JT2020 Spare parts manual FM13

Condition: good (used), Year of construction: 2008, operating hours: 3,709 h, fuel type: diesel, JLG 450 AJ Articulating boom lift / Work platform, 15.72 m working height, 4x4, 2008, Perkins Diesel. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex-works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Bjdpfe Ahxxnox Afmjlp

Condition: good (used), Year of construction: 2018, fuel type: diesel, mileage: 139,605 km, Renault Master 2.3DCI Klubb K32 aerial platform / truck-mounted lift, 10.5 meters working height, 2018 French registration A video can be sent via WhatsApp. We have a continuous supply; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition, without warranties (see our general terms and conditions). You can make an appointment for a viewing and/or test drive without any obligation. Blodpfxs Ahxxgo Afmsp Please call in advance, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2005, Offer 25474 Technical data: Bledpfxo Ahxxcs Afmjp - Suitable for coolants, oils, etc. - Tank with a capacity of approximately 3000 liters - Vacuum blower RIETSCHLE, type VO 100 - Level indicator - Tank diameter approximately 1250 mm - Tank length approximately 2500 mm - Front-mounted tank door - Connection 400 V / 3 kW - Platform dimensions approximately L 3000 x H 600 x D 1500 mm - Space requirement without drawbar approximately L 3600 x H 2500 x D 1600 mm - Drawbar approximately 1200 mm - Weight approximately 3000 kg

Condition: ready for operation (used), For sale: a conveyor belt, 15 meters long, with a belt width of 0.8 meters. It is robust, in good working order, and ready for use. Transportation is possible. Itebisyk U Amo Nxphfsc Bedpfs Ahxw Ujx Afmolp Interested parties are welcome to contact us.

Condition: as good as new (ex-display), KraussMaffei KM 120-380 PX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 120-380 PX Year of Manufacture: 2023 Machine Type: Servo-electric injection molding machine with a servo-hydraulic system Clamping force: 1200 kN / 120 tons Screw diameter: 40 mm Control system: KraussMaffei MC6 Machine Description Bsdpfx Aj Ahxw Rofmelp We offer a KraussMaffei KM 120-380 PX injection molding machine, manufactured in 2023, with a clamping force of 1200 kN (120 tons), equipped with a modern, 5-point, double-toggle clamping system with servo-electric drive. The machine features a servo-electric drive for injection and plasticizing, and a servo-hydraulic drive for the injection unit movement. It is equipped with an HPS-Mixing plasticizing unit with a 40 mm diameter screw, ensuring efficient plasticization and homogenization of the plastic. The KraussMaffei MC6 control system is based on an industrial computer with real-time Ethernet technology. TECHNICAL DATA Clamping Unit Clamping force: 1200 kN / 120 tons Mold opening force: 180 kN Clamping system: 5-point, double-toggle, 3-plate Clamping drive: servo-electric Mounting plate dimensions (H × V): 640 × 590 mm Column spacing (H × V): 470 × 420 mm Mold opening stroke: 400 mm Minimum mold height: 180 mm Maximum mold height: 550 mm Maximum distance between plates: 950 mm Ejector stroke: 175 mm Ejector force (forward / backward): 22 / 10 kN Injection Unit Plasticizing system type: HPS-Mixing Screw diameter: 40 mm L/D ratio: 20.0 Maximum injection pressure: 1860 bar Injection volume: 201 cm³ Injection weight: 183 g Injection speed: 125 mm/s Volumetric injection rate: 157 cm³/s Screw speed: 334 rpm Plasticizing rate: 24.7 g/s Nozzle radius: 10 mm Nozzle orifice diameter: 4 mm Injection and plasticizing drive: servo-electric Electrical and Hydraulic Equipment Control system: KraussMaffei MC6 Connected power: 13.8 kW Electrical protection: 63 A Installed heating power: 11.5 kW Number of adjustable heating zones in the cylinder: 5 Dry cycle time / stroke according to EUROMAP 6: 1.5 s / 329 mm Oil tank capacity: 120 l Machine Weight Net weight: 6900 kg / 6.9 t

Condition: good (used), Approx. 20 pallet lifting tables, E-shaped, Hymo – used: Bedpfe Ahxw Hox Afmolp Price per unit ex works: only €950 (net) including loading Manufacturer: Hymo Type: unknown Year of manufacture: unknown Load capacity: max. 1,000 kg Useful lifting height: should be 80 cm 3/400 V/24 V/50 Hz Condition: good, hydraulic oil has been drained Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: like new (used), Machine like in new condition. Only used for a few demos on products. Ask for additional information! Bedpfx Ae Ahxw Asfmslp

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2012, total width: 2,480 mm, suspension: air, color: black, General information Year of construction: 2012 Registration number: OL-87-SY Axle configuration Make axles: SAF Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 5.460 kg Carrying capacity: 37.540 kg GVW: 43.000 kg Condition Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS - Lift axle Bsdpfx As Ahxwuofmelp - Twist-locks = Remarks = Broshuis 3UCC-39/45 / SAF + Disc / 1x Lift Axle

Condition: good (used), Approx. 18 swivel stools, step stools, elephant-foot stools – used: Price for the entire lot, ex warehouse: €350 (net) including the rolling cart! Manufacturer: unknown Type: unknown Year of manufacture: unknown Height-adjustable, with cardboard box magazine Condition: good Available: immediately Location: Frankenberg / Saxony warehouse Bledj Ahxwqjpfx Afmop

Condition: used, functionality: fully functional, The ToolTemp TT 162-E temperature control units are for sale. The price is per unit. Bledpo Ahxwisfx Afmsp Medium: Water Heating capacity: 12 kW Cooling capacity: 35 kW Pump: 4 bar Control system: MP 888/MP 694

Condition: new, Year of construction: 2026, New Atlas Copco screw compressor with European warranty. Key features: Maximum pressure: 10 bar Flow rate: 5820 liters/min Bljdpfxj Ahxwfe Afmep Power: 30 kW / 40 hp LIST PRICE: EUR 47,030 We are official Atlas Copco dealers and offer compressors at heavily discounted prices.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: DRI 07380128, overall weight: 7,210 kg, fuel type: diesel, drilling depth: 30,000 mm, TECHNICAL DETAILS Pull/push force: max. 147 kN (approx. 15 t) Torque: max. 4,300 Nm Drilling length: max. 300 m (depending on soil conditions) Reaming diameter: max. 500 mm (depending on soil conditions) Pilot bore diameter: 100 mm MACHINE DETAILS Drive type: Diesel-hydraulic Drive power: 106 kW (approx. 144 hp) Dimensions & Weight Dimensions (L x W x H): 6,350 x 2,000 x 2,300 mm Weight: 7,210 kg EQUIPMENT Rubber track undercarriage CE marking Twin-drive drilling system Integrated drill string magazine Hydraulic drill string handling Bedpfx Aj Ahxwbofmolp Operator cabin with joystick control External control panel with cable and emergency stop Hydraulic support legs

Condition: good (used), mileage: 629,950 km, fuel type: diesel, Year of construction: 2019, Scania S450 NGS 6X2 Machine Transporter / Low-Loader Truck Euro 6 Automatic - Full Air Suspension - 2019 Steering axle Lift axle Smart Tacho MOT valid until 11-27 Dimensions of the loading platform: Length: 885cm Width: 255cm Loading floor height: 110cm Load capacity: 14300KG Interested in financial leasing? Inquire about the options. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machinery, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always on site. Van de Wert Trading B.V. Bjdpfj Ahxv Nsx Afmelp Bedrijfsstraat 3 5391 LR Nuland

Condition: as good as new (ex-display), Year of construction: 2019, KraussMaffei KM 80-380 CX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 80-380 CX Year of manufacture: 2019 Machine type: Hydraulic injection molding machine for plastics Clamping force: 800 kN / 80 tons Screw diameter: 40 mm Injection unit: SP 380 Machine description We offer a KraussMaffei KM 80-380 CX injection molding machine, manufactured in 2019, with a clamping force of 800 kN (80 tons), equipped with an SP 380 injection unit and a 40 mm diameter screw. TECHNICAL DATA Clamping unit Clamping force: 800 kN / 80 tons Mold opening force: 55 kN Column spacing (H × V): 420 × 420 mm Mold opening stroke: 500 mm Minimum mold height: 250 mm Maximum distance between platens: 750 mm Ejector stroke: 150 mm Ejector force (forward / backward): 23 / 10 kN Maximum mold weight: 1000 kg Injection unit SP 380 Screw diameter: 40 mm L/D ratio: 20 Maximum injection pressure: 2101 bar Injection volume: 201 cm³ Bodpfs Ahxv Eex Afmslp Injection weight: 183 g Injection speed: 100 mm/s Volumetric injection rate: 126 cm³/s Screw speed: 295 rpm Installed heating power: 10.9 kW Nozzle pressing force: 50 kN General data Pump drive power: 15 kW Dry cycle time / stroke according to EUROMAP 6: 1.7 s / 294 mm Oil tank capacity: 280 l Dimensions and weight Length: 4090 mm Width: 1480 mm Height: 2020 mm Machine weight: approximately 3500 kg

Condition: new, Year of construction: 2026, New Atlas Copco screw compressor with European warranty. Key features: Maximum pressure: 10 bar Flow rate: 4500 liters/minute Power: 22 kW / 30 hp Bedpfx Afo Ahxvwjmolp LIST PRICE: EUR 40,700 We are official Atlas Copco dealers and offer compressors at significantly reduced prices.

Condition: good (used), mileage: 332,058 km, power: 355 kW (482.67 HP), first registration: 07/2022, fuel type: diesel, tire size: 385 / 65 / R22.5, axle configuration: 4x2, wheelbase: 4,000 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6e, suspension: steel-air, total length: 6,520 mm, total width: 2,550 mm, total height: 4,000 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, full service history, power mirror, second fuel tank, soot filter, spoiler, General information Number of doors: 2 Cab: XG Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Make axles: DAF Bjdpfxo Ahxvte Afmelp Brakes: disc brakes Front axle: Tyre size: 385 / 65 / R22.5; Max. axle load: 8000 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle: Tyre size: 315 / 70 / R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 8.011 kg Carrying capacity: 11.489 kg GVW: 19.500 kg Interior Interior: grey Number of seats: 2 History Number of owners: 3 Condition Technical condition: good Visual appearance: good Number of keys: 2 (1 hand transmitter) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Aluminium fuel tank - Armrest - Baggage cover - Car kit - Low-noise - Particulate filter - Radio - Radio, MP3 enabled - Remote central locking - Speed limiter - Spotlights - Stability control - Visor - Webasto

Condition: good (used), mileage: 929,029 km, power: 294 kW (399.73 HP), first registration: 06/2015, fuel type: diesel, tire size: 315 / 70 / R22.5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,000 mm, total width: 2,550 mm, total height: 3,800 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, soot filter, General information Cab: XLX Technical information Number of cylinders: 6 Engine capacity: 12.419 cc Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Tyre size: 315 / 70 / R22.5 Make axles: MAN Brakes: disc brakes Front axle: Max. axle load: 7500 kg; Steering; Tyre profile left: 20%; Tyre profile right: 20%; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 20%; Tyre profile left outer: 20%; Tyre profile right outer: 20%; Tyre profile right outer: 20%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 7.216 kg Carrying capacity: 11.784 kg GVW: 19.000 kg Interior Interior: grey Number of seats: 2 History Number of owners: 1 Condition Technical condition: good Visual appearance: good Number of keys: 1 (1 hand transmitter) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Armrest - Car kit - Low-noise - Particulate filter - Radio - Remote central locking Bledpfx Ae Ahxvpefmop - Speed limiter - Stability control - Toolbox - Webasto

Condition: good (used), 5 packing tables, 2 of them with cabinets – used: Price for all 5 units ex works: €2,000 (net) including loading! Manufacturer: unknown, possibly ROCHOLZ Type: unknown Year of manufacture: unknown Height-adjustable, with cardboard box magazine Bodpfxs Ahxvho Afmolp Condition: good Available: immediately Location: Frankenberg/Saxony warehouse

Condition: new, Year of construction: 2026, New Atlas Copco screw compressor with European warranty. Includes dryer and enlarged 500-liter tank. Key features: Bjdpe Ahxvdsfx Afmslp Maximum pressure: 10 bar Flow rate: 1020 liters/min Power: 7 kW / 10 hp We are official Atlas Copco dealers and offer compressors at greatly reduced prices.

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-5/50XT was manufactured in 2023. It features an impressive X-axis travel of 1,524 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a robust table size of 1,575 × 584 mm and a maximum table load of 1,814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-5/50XT vertical machining centre we have for sale. Contact us for further details. Blodpfe Ahxvajx Afmep - Table Dimensions: 1,575 × 584 mm - Maximum Table Load: 1,814 kg - Spindle Taper: CT 50 / BT 50 - Tool Changer Capacity: 30+1 pockets - Rapid Traverse (X/Y/Z): 18 m/min - Coolant Tank Capacity: 360 L - Machine Weight: approx. 7,371 kg - Transport Dimensions (L × W × H): approx. 4,270 × 2,600 × 3,180 mm - Supply Voltage: 440 V - Phase: 3-Phase - Frequency: 50/60 Hz - Full Load Current: 55 A - Maximum Load Current: 50 A - Wiring Diagram Number: 96 / 0284 - CE Marked: Yes

Condition: used, mileage: 143,050 km, power: 85 kW (115.57 HP), first registration: 01/2023, fuel type: diesel, fuel: diesel, Unladen weight: 1,480 kg Damage: none Bljdpfxe Ahxu Sj Afmjp License plate: S-855-FF