Baumgärtner CNC GmbH & Co. KG

Condition: good (used), Functionality: fully functional, Cover Maho DMU 50 T The machine is in good condition. -Control: Millplus M -Travel X-, Y-, Z-axis: 500/400/400mm -feed speed 0.01-10000 mm/min -rapid traverse 12 m/min -Spindle speed: 20-9000 1/min -Tool holder: SK40 DIN 69871 -Tool magazine with 16 places -Machine weight approx. 3000kg -Transport dimensions (L x W x h) 2.00 x 1.52 x 2.14 -Incl. 4 machine feet -Incl. manual control unit -Display for rotation/swivel axis in control unit We are happy to offer you transportation, installation and commissioning on site. Everything from a single source: We at Baumgärtner CNC GmbH & Co. KG are a company that specializes in: -service -maintenance Klelhccju U Evpjqpot -overhaul -automation of DMG machines and other well-known manufacturers. We accompany you! From the purchase of the machine, to transportation and installation, to commissioning and subsequent maintenance or repair work, you can count on us.

Condition: excellent (used), Functionality: fully functional, travel distance X-axis: 633 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: ITNC530, rotational speed (min.): 18,000 rpm, Equipment: chip conveyor, documentation/manual, Cover Maho DMU 60 MonoBLOCK -Control: Heidenhain ITNC 530 -Travel X-, Y-, Z-axis: 633/560/560mm -feed speed 0.01-30000 mm/min -rapid traverse 30 m/min -Spindle speed: 20-18000 1/min -Tool holder: SK40 DIN 69871 -Tool magazine with 24 places -Machine weight approx. 9000 kg -Chip conveyor -Rinsing gun -Coolant blow air changeover (M25) -Heidenhain TS 649 touch probe -Manual control unit -BLUM laser -bed flushing The machine was checked and measured. A geometry report was created. The geometry is within the tolerance for new machines. Very good condition. An inspection / test, on site under power, is of course possible. We are happy to offer transportation, installation and commissioning on site. Everything from a single source: We at Baumgärtner CNC GmbH & Co. KG are a company that specializes in: -service -maintenance -overhaul -automation of DMG machines and other well-known manufacturers. Klelhccqouii Hnjpjt We accompany you! From the purchase of the machine, to transportation and installation, to commissioning and subsequent maintenance or repair work, you can count on us.

Condition: refurbished (used), Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, controller manufacturer: Heidenhain, controller model: Millplus, total height: 2,140 mm, total length: 20 mm, total width: 1,530 mm, table load: 250 kg, rotary table diameter: 800 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 9,000 rpm, overall weight: 3,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 9,000 rpm, number of slots in tool magazine: 16, power: 9 kW (12.24 HP), Equipment: documentation/manual, rotational speed infinitely variable, Cover Maho DMU 50 T -Control: Millplus M or optionally Heidenhain TNC 426 -Machine number: 11035510844 -Travel X-, Y-, Z-axis: 500/400/400mm -feed speed 0.01-10000 mm/min -rapid traverse 12 m/min -Spindle speed: 20-9000 1/min -Tool holder: SK40 DIN 69871 -Tool magazine with 16 places -Machine weight approx. 3000kg -Transport dimensions (L x W x h) 2.00 x 1.52 x 2.14 -Incl. 4 machine feet The machine has been completely overhauled. A geometry protocol was created, the geometry is within the tolerance for new machines. The following work/overhauls were carried out on the machine: -Complete disassembly -Basic cleaning of all components -Cleaning of the switch cabinet interior -Overhauled ball screw drives in X/Y/Z -General overhaul of the main spindle incl. drive motor -Overhaul of all drive controllers -Renewal of the stop buffers of the axes -Replacement of all toothed belts -Conversion to a crash-proof tool changer -Installation of a new maintenance unit -Replacement of all coolant and pneumatic lines -Installation of switchover between coolant & compressed air as cooling medium -Retrofitting a chip rinsing gun -Repainting the work area and cladding parts with 2K paint -Replacement of the protective windows with VSG -Renewal of the control panel -Installation of a TFT monitor -USB interface for data transfer via CDS-Lite -Replacement of the machine light with an LED2Work CENALED spotlight -Installation of a Rittal air conditioning unit -Replacement of the main switch Kljlhccjuii E Rjqpjt -KSS tray repainted -Creation of a geometry & acceptance protocol An on-site inspection / test under power is of course possible. We are happy to offer you transportation, installation and commissioning on site. Everything from a single source: We at Baumgärtner CNC GmbH & Co. KG are a company that specializes in: -service -maintenance -overhaul -automation of DMG machines and other well-known manufacturers. We accompany you! From the purchase of the machine, to transportation and installation, to commissioning and subsequent maintenance or repair work, you can count on us.

Condition: refurbished (used), Year of construction: 2009, Functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D SL, workpiece weight (max.): 600 kg, total height: 2,700 mm, total length: 3,000 mm, total width: 3,000 mm, table width: 560 mm, table length: 760 mm, table load: 600 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 4,500 kg, spindle speed (min.): 14,000 rpm, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 20, Equipment: documentation/manual, rotational speed infinitely variable, Maho DMC 635 lid Klelhccqsrt Tl Ispot -Control: Siemens 840 D SL with ShopMill -Travel X-, Y-, Z-axis: 635/510/460mm -feed speed 0.01-30000 mm/min -rapid traverse 30 m/min -spindle speed: 20-14000 1/min -Table clamping surface 790 x 560 mm -Tool holder: SK40 DIN 69871 -Tool magazine with 20 places -Machine weight approx. 4500 kg -chip conveyor -Rinsing gun -Coolant blow air changeover (M25) -Heidenhain TS 649 touch probe -Manual control unit The machine has been completely overhauled. A geometry protocol was created. The following work/overhauls were carried out on the machine: -Complete cleaning -Ball screw drives in X/Y/Z overhauled -Guides XYZ renewed (Bosch guides!!) -New main spindle -Replacement of all toothed belts -Replacement of all coolant and pneumatic lines -Repainting of the working area and the cladding parts with 2K paint -Replacement of the protective screens -Creation of a geometry & acceptance report An on-site inspection / test under power is of course possible. We are also happy to offer transportation, installation and commissioning at your premises. Everything from a single source: We at Baumgärtner CNC GmbH & Co. KG are a company that specializes in: -service -maintenance -overhaul -automation of DMG machines and other well-known manufacturers. We accompany you! From the purchase of the machine, to transportation and installation, to commissioning and subsequent maintenance or repair work, you can count on us.

Condition: reconditioned (used), Universal tool milling machine cover FP1: Technical data: -Working range X: approx. 300 mm -working range Y: approx. 150 mm -Working range Z: approx. 340 mm -swiveling angular table -Clamping surface: 260x600mm -T-slots: 5 -T-slot width: 12 mm -Spindle speeds:: 20 - 2000 rpm -speed range - vertical: 60 - 1200 rpm -speed range - horizontal: 95 - 1900 rpm -Speed steps working spindle: 12 -feed range: 10 - 500 mm/min -feed steps: 10 -spindle mounting: MK 4 -Pinhole stroke vertical: 60 mm -Total power requirement: 1.7 kW -machine weight approx.: 0.8 t -space requirement approx.: 0.9 x 1.05 x 1.55 m Scope of overhaul: -Complete renewal of the electronics (from a professional with circuit diagram!) -Cleaning -polishing of all blanks -New paint -exchange of various signs Kjlhcjhv H Spocqpslt -Replacement of all standard parts (screws, handles, levers, hand wheels, oil sight glasses etc.) -bearing and sealing of the upper gear shaft -sealing of the coolant pump -Conversion of the feed axles to safety handwheels -reinstallation of the coolant lines -adjustment of the V-guides and axle clamps On request, the machine can be equipped with glass scales in all axes. The machine can be inspected and tested by appointment. The machine transport and various accessories we offer you with pleasure.