metorg GmbH

Year of construction: 2017, condition: refurbished (used), functionality: fully functional, The unique tape plotter works on almost any surface without problems, as the applicator head can compensate surface irregularities and height differences. Moreover, the TAPEJET handles cardboard and corrugated as well as print sheets reliably due to the connectable sheet separating function. Kjdpfjy Szp Dox An Uedl Gluing area: 1900mm x 3000mm Electrical supply: 230V mono 50Hz + PE Area required: 3.1m x 7m Weight: 1500 kg Machine in is at our premises, testing on-site is possible.

Year of construction: 1990, condition: ready for operation (used), Haul length: 1155-3500mm, blank width: 530-2400mm, creasing height: 300-2400mm, creasing length: 410-1600mm, creasing width: 150-1340mm, flap width: 35-50mm, max. format: 7000x2400mm, folded: 3500x2400mm, connected load: 20kVA, length: 15,000mm, width: 8000mm, height: 5000mm, with documentation. An inspection on site is possible. Kjdpfx Asy Sv S Ton Uodl

Year of construction: 1987, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 325, Bielomatik Jumbo-Roll Collator, collating system for sets with 5 webs, including cross cutter and numbering unit. Production Specifications: Format length: 406.4 – 635 mm (16 – 25 inches) Format length increment: 1/12 inch Paper weight: 90 – 160 g/m² Production capacity: 1-web at 12 inches 10,000 sheets/h Delivery type: sheet or folded Kedpsy Nyb Tefx An Usdl Unwinding: 5x up to 1270 mm reels, with 70 mm core diameter, 4x up to 700 mm reels, with 70 mm core diameter Maximum web width: 500 mm Number of numbering stations: 1 (2-web possible) Letterpress printing: 1x letterpress numbering unit for 24 inch and 25 inch, Working width: 500 mm Inkjet: possible Cross-perforation station: 1 Tooling: Tool 1 x 16 inch: special divisions 4 1/3 inch, 4 3/12 inch, 12 1/6 inch Tool 1 x 17 inch: divisions 4 1/4 inch, 8 1/2 inch, 17 inch Tool 1 x 24 inch: divisions 6 x 4 inch (4 inch, 6 inch, 8 inch, 12 inch) Tool 1 x 24 inch: special division for cross perforation 18 mm (e.g. Snapout) Tool 1 x 25 inch: with gear division as per 24 inch Stapling: No Crimping: 4 crimping tools for 2-web production possible as 2 inch Swedish crimp Longitudinal gluing: continuous and intermittent possible on both sides for 16 inch, 17 inch and 24 inch. Not intermittent for 11 4/6 inch and 12 1/2 inch Cross gluing: 2 cross gluing units 24 inch, type ESS 17 inch glue cylinders, 2 pieces Edge trimming: max. 15 mm both sides, min. 5 mm one side Separation cut: Yes, for double output Fold lengths: 7 1/3 up to 17 inch possible Format gears for 16 inch, 17 inch, and 24 inch available, also 11 inch + 13 inch (cross perforation must be applied on the printing machine). 11 4/6 inch + 25 inch + 9 inch correction gears Accessories: Fold gears: 8 inch with 24 inch cylinder 8 1/3 inch with 24 inch cylinder and 25 inch gear 8 1/2 inch with 17 inch cylinder 9 inch with 9 inch gear on 17 inch cylinder 11 4/6 inch with 11 4/6 gear 12 inch with 24 inch cylinder 12 1/2 inch with 24 inch cylinder + 25 inch gear 16 inch with 16 inch cylinder 16 inch cross perforation, payment slip + fold on Bielo (special perforation height 17 mm) 17 inch with 17 inch cylinder

Year of construction: 1971, condition: ready for operation (used), A rotary can seaming machine with double seaming function CCC is available. Stations: 6, can diameter range: 202mm-502mm, can height range: 100mm-700mm. An on-site inspection is possible. Kedpfx Aey Ndd Sen Uodl

Year of construction: 1983, condition: ready for operation (used), A rotary can seaming machine with double-seaming function CCC, which was overhauled by Schmalbach Lubeca, is available. Throughput capacity: 360cans/min, can height range: 77mm-285mm, stations: 6. An on-site inspection is possible. Kedpfey Ndfcsx An Uodl

Year of construction: 2019, condition: good (used), Aluminum cylinders with diameters of 140 mm and 90 mm, wall thickness 5 mm; a clamping ring secures the 50 mm shaft stub, which is turned down to 45 mm; shell length: minimum 2720 mm, maximum 2800 mm. 27 pieces of 90 mm diameter cylinders, 6 pieces of 140 mm diameter cylinders. Price applies to the total quantity. Kjdpfx Ansy Nc H Eo Usdl

Year of construction: 1973, condition: ready for operation (used), An FMI separating machine for can production is available. Production capacity: approx. 500cans/min, diameter range: 52mm-99mm, height range: 40mm-85mm. An on-site inspection is possible. Ksdpsy I Adzjfx An Usdl

Year of construction: 1970, condition: ready for operation (used), A Borden beading machine for metal can production is available. Can diameter range: 211mm/603mm, can height range: 300mm-700mm. Documentation available. An on-site inspection is possible. Kdodpfxjy I Aduo An Ujl

Year of construction: 1970, condition: ready for operation (used), A beader, flanging and beading machine for cans by Metal Box Company is available. Can type: 3-piece cans, can shape: round, tool diameter: 150mm, max. can height: 180mm, performance range: 70-280cans/min. An on-site inspection is possible. Ksdpfx Ansy I Adno Usdl

Year of construction: 2023, condition: used, DTF plotter + Plotter Epson SureColor SC-F6400H Ksdpsy E Ncljfx An Ujdl 6 colors with black HD

Condition: used, Pallet strapper two heads two lance with conveyors and wrapping machine Kdedpfxey Eq Rqe An Ujl Pallet strapper can be sold separately.

Year of construction: 2010, condition: ready for operation (used), Film width: 420mm, max. film roll diameter: 280mm, film length range: 500-1000mm, film core diameter: 76mm, film type: airpad, film thickness range: 0.042-0.08mm, capacity: 25-49 cycles/min, fuse protection: 16A, connected load: 2kVA, energy consumption: 1.1kWh, compressed air connection hose diameter NW10: 4-8bar, air consumption: max. 82Nl/min during cushion production, max. 3.5Nl per cycle, continuous sound pressure level: 70dB, length: 1600mm, width: 800mm, height: 1300mm, weight: approx. 266kg. An on-site inspection is possible. Ksdsy Duqlepfx An Usdl

Year of construction: 2021, condition: used, Max paper size: 760 x 520 mm Min paper size: 320 x 260 mm Max die-cutting size: 750 x 510 mm Max stamping size: 740 x 500 mm Feeder pile height: 1280 mm Delivery pile height: 1100 mm Max speed: 9000 sheets/h Pressure: 250 T 8 independent heating zones Power: 38 KW Weight: 14 tons Kdodoy Anl Hopfx An Usl

Year of construction: 1980, condition: ready for operation (used), Various small machines from a packaging factory are available. 1) Multi-spindle paper drilling machine Constanting Hang 106MK/8, year of manufacture: 1980, drilling spindles: 8, drilling range: 3mm-8mm, hole spacing range: 36mm-630mm. Documentation available. 2) Vibrating table Müro 70x72 ST, paper dimensions X/Y: 700mm/450mm, max. stack height: 100mm, weight: approx. 50kg. 3) Small extraction unit Kongshilde TRL 40, year of manufacture: 2023, machine dimensions X/Y/Z: approx. 900mm/1000mm/950mm. 4) Conveyor belt, year of manufacture: 2018, belt height: approx. 970mm, belt dimensions X/Y: approx. 2300mm/600mm, machine dimensions X/Y/Z: approx. 2400mm/950mm/1050mm. An on-site inspection is possible. Only a package sale is possible. Kjdpfx Aney Aaffo Ujdl

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Kodpfxoyx Uy As An Uedl Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: like new (used), functionality: fully functional, Model 2DS: Measurable sheet sizes: 100 - 2000 mm Scale graduation: 1/2 mm Accuracy of reading: 1/2 mm (1/10 mm possible) Angular deviations: 1/2 mm Glare-free built-in illumination: 4 fluorescent tubes (210 Watt) Voltage: 220V - 50 Hz Exterior dimensions in mm: 2120 x 1150 x 220 Weight (ca.): 108 kg Kedpsygi A Tefx An Uedl

Year of construction: 2016, condition: good (used), Coating head with unwinder. Application: coating with water-based acrylic adhesives. Kdjdjyf Ebijpfx An Ujl

Condition: like new (used), functionality: fully functional, Model D2: Measurable sheet sizes: 100 - 1600 mm Accuracy of reading: 1/2 mm (1/10 mm possible) Angular deviations: 1/2 mm Built-in glare-free illumination: 3 fluorescent tubes (174 Watt) Voltage: 220 V - 50 Hz Exterior dimensions in mm: 1775 x 1150 x 220 Weight (without iron frame): ± 86 kg Price per item: 3,000. There are three measuring tables of this type available. Kdsdpfx Ajya Hflon Ujl

Condition: good (used), Year of construction: 1998, functionality: fully functional, Paper making machine / production line including stock preparation, paper machine, calander and winder. Screen and press part manufactured by Papcel in 1998 Kdjdpfxox Tazzs An Usl Drying section manufactured by PaMa, refurbished Screen width: 2350 mm Trim width: 2050 mm Capacity: 20 tons / day Grammage range: 80 - 240 g/m2 Product: recycled paper, packaging papers, Schrenz, Medium / Fluting

Year of construction: 1986, condition: used, We offer for sale a complete paper roll rewinder with high utility value. The machine has undergone a range of significant upgrades, greatly enhancing its reliability, quality of operation, and performance. The unit is fully assembled and ready for immediate use. Technical Data: - Machine type: FAMPA KM36 slitter - Year of manufacture: 1986 - Manufacturer: Fampa Beliot, Poland - Working width: up to 2450–2500 mm - Max. working speed: up to 1000 m/min - Paper grammage range: 30–400 g/m² - Max. unwinding roll diameter: Ø 2000 mm - Max. winding roll diameter: Ø 1500 mm Machine Upgrades and Advantages: - Drive system upgrade – value approx. EUR 95,000. The old thyristor (DC) drive has been replaced with a modern system based on two Siemens (AC) motors. - New DIENES knife holder (Germany) – value approx. EUR 50,000. Completely new knife carriage, capable of operating up to 9 knives simultaneously. - GOHA ES automatic unwinder – value approx. EUR 70,000. - ProfiCool Genius PCG 300 01-NEB chiller – capacity 2.9 kW. - Control cabinet modernization – improved safety and operational reliability. Kodsx Sdctspfx An Uodl Commercial Information: The machine is complete and in our plant storage. Location: 57-256 Bardo Availability: Immediate For further information or to arrange a viewing, please contact us.

Condition: ready for operation (used), optionally in combination with an oval riveting machine of the same brand/age; see our other advertisement Kdsdpex Nfhlefx An Uel

Condition: ready for operation (used), In use from 1991 until it was last used and has been little prone to problems despite being a 1990s Chinese punching and riveting machine for oval eyelets. Kodsx Nd U Depfx An Uodl

Condition: excellent (used), functionality: fully functional, Technical data: Operating voltage: 400V AC Main fuse: 50A Frequency: 50Hz Connected load: 19.1kW Control voltage: 24V DC Compressed air: 6 bar Production capacity: 20 x 2m modules/h Degree of automation: fully automatic Installation dimensions: 12.5 x 5.2 x 4m (Width x Height x Depth) Stations: Decoiler: This station loads the coil and unwinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400 Cosmetic tape applicator: Application of a cosmetic tape to the rear module edge of the product part using an applicator. Manufacturer: Printum Laser cell: Creation of contact openings on the rear module edge of the product part using a laser, and inspection of correct contact opening with pneumatic Ignun contact pins. Manufacturer: ACSYS Lasertechnik GmbH CO² Laser INLINER II 40W CO2 Inspection station: Empty cell for conducting tests on test material. Transfer tape applicator cell: Application of a transfer tape to the rear module edge of the product part using an applicator. Kdodpfx Anoxzug So Ujl Contact strip applicator cell: Insertion of preforms (solder pads) into the opened contact openings, followed by application of a contact strip to the rear module edge of the product part using an applicator. Soldering station: Establishment of electrical contacts by soldering the preforms (solder pads) to the contact strip. Manufacturer: ATN Automatisierungstechnik Niemeier GmbH Flasher station: Testing the functionality of the product part using a flasher and simultaneous contacting with pneumatic Ignun contact pins. Manufacturer: WAVELABS Solar Metrology Systems GmbH Type: WLAAA0039 Designation: Module flasher Empty cell: Currently no processing of the product part. Recoiler: This station loads the coil and rewinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 309002, No minimum price – guaranteed sale to the highest bidder! Kdsdpfjxygdmox An Uol By placing a bid, you commit to collecting the item by 31/12/2025!

Condition: used, Year of construction: 2008, Technical data: Working Width: 1300 mm Maximum Speed: 550 m/min Unwinder Type: Shaftless Maximum Unwinder Roll Diameter: 1000 mm Rewinder Type: Double shaft, center-driven Maximum Rewinder Roll Diameter: 650 mm Minimum Slit Width: 35 mm / 25 mm (optional) Processed Materials: PP, PET, LDPE, HDPE, paper, and laminated materials Knife Types: Blade slitter and rotary knives Control System: Touchscreen HMI with web monitoring and recipe management Additional Features: • Automatic knife positioning system • Shaftless unwinding with hydraulic tilting arms • Laser core guiding for precise and quick setup Kdjdpfx Anexxmr Uj Ujl • Modular design for easy maintenance and access