Augusthandel GmbH

Condition: new, operating hours: 5 h, functionality: fully functional, control cabinet width: 800 mm, control cabinet height: 1,700 mm, input voltage: 400 V, input current: 16 A, type of input current: AC, Equipment: documentation/manual, Individual System L25-2203 cleanCABINET CL 100G-BRP Hnjdpfx Aezl Slyel Tep Complete laser system for integration as individual components, consisting of the following modules: - Special item: Low-power laser production Laser system CL100G-BRP, diode-pumped laser Wavelength 1064nm, operating mode: pulsed (ns) Average laser power: P = 100 W +/- 3% Prepared for pilot laser, 19" rack-mount design Comparable to 2003836 Special configuration: 10m fiber length, extended pulses - 2D optics system Stamp 10 for LP lasers (CL12BRP-CL100BRP) Automated 2D optics with connection for back-reflection protection (BRP) and 90° deflection, max. working area: 120mmx120mm (=160mm)/290mmx290mm (F=420mm) Focus diameter depends on the focal length of the optics Included components: 2D optics system Stamp 10 90° connection Control electronics Cable set cleanSTUDIO/cleanCONTROL license for 2D optics (without axis system support) RTC - Focusing lens f=254, fully quartz, High grade, working area approx. 150mmx150mm Minimal focus shift - BG protective glass slide STAMP 10/14 F420 Quick-change slide for mounting on the Stamp14 with locking monitoring - Alignment laser for low-power lasers (LP) (CL12G-CL-500G) The alignment laser allows monitoring the beam incident point on the component surface. Installation in the beam source, coupling into the fiber transmission, wavelength = 660nm, power: P = 0.5 mW (min. 0.2mW, max. 1.0 mW) - Decentralized laser source housing W/L Housing for the CL100 beam source including air-water heat exchanger 2kW, see 3D-CAD file. - GS control cabinet 1-1600 (CL12G-CL100G) Update: 32m cable length Laser housing in control cabinet design, type 1/1600 for low-power laser systems (CL12G-CL100G) consisting of: cabinet frame with Rittal double-bit lock, structural powder coating, RAL 7035S, optional air conditioning Installed on heavy-duty rollers, braked, 250kg load capacity, Fiber/cable feed-through through the roof, power supply via Harting Han6, left side panel, safety circuit "Performance Level D", installation position of laser and fiber outlet variable, emergency stop, key switch for starting and main switch in the front door, tested according to DGUVV3 Dimensions: HxWxD: 1600x600x800mm requires operation visualization, cooling capacity adjusted to the ambient temperature at the installation location WITHOUT AIR CONDITIONING as it is only for accommodating HMI, PC and PL-D technology including PLD technology PLD item as plug-in module (see below or alternatively wired in the control cabinet - BG housing 19" 2U PLD PLD plug-in for safe shutdown of low-power laser systems, installed in 19" housing - 2U for use with laser systems - VS-OPT Ethercat copper (MP/HP 2D) Ethercat interface for mid and high-power (2D) systems - fieldbus interface - 2D interface - Ethercat copper - cleanSTUDIO protocol - IPC 19" 1U - Touch panel standard 17-inch with HDMI+DP-VGA - Keyboard with trackball DE QWERTZ keyboard with trackball (DE)

Year of construction: 2020, condition: ready for operation (used), A Guggenberger chamber washing machine is available. Number of wash carts: 8, wash cart capacity: 8 pallets, pallet dimensions X/Y/Z: 1200mm/800mm/160mm, spray pump power: 11kW, fan capacity: 4000m³/h, operating hours: approx. 4350h. Including rotary nozzles, spin drying unit, tilting device, exhaust fan with steam damper, condensate separator, gloss drying, tank heating with booster, compact belt filter system, oil skimmer and steam condensator. Documentation available. An on-site inspection is possible. Hnsdpszlt N Hefx Al Tep

Year of construction: 1991, operating hours: 19,888 h, condition: used, - Year: 1991 Hnedpfxjzldwbo Al Tjp - Documentation available: No - CE certificate present: No - Serial number: 1844 - Operating hours: 19888 - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), A mobile Munk + Schmitz vacuum blast machine is available. Blast head diameter: 103mm, blast nozzle diameter: 8mm, effective blast pattern width: approx. 30mm, pressure vessel volume: 60l, abrasive capacity metallic/non-metallic: 200kg/100kg, max. abrasive grain size: 1.6mm, filter area: 21m², dust separation efficiency: 99.9%, machine dimensions X/Y/Z: approx. 2050mm/750mm/2300mm, weight: approx. 550kg. An on-site inspection is possible. Hnsdpezk Nafefx Al Tep

Condition: used, functionality: fully functional, -WAG 917- Offered here is a trough-type shot blasting machine from the manufacturer Wheelabrator, model T85. The machine is used and fully functional. Hnodpfxozktvqj Al Tep Manufacturer: Wheelabrator Model: T85 Machine number: 6610246 Overall width: approx. 2300 mm Conveyor belt width: approx. 750 mm Overall height: approx. 3250 mm Overall depth: approx. 2100 mm Year of manufacture: 1996 The machine is dismantled and cannot be tested under power on-site.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, type of input current: AC, laser power: 1,070 W, input frequency: 50 Hz, continuous power: 1.2 kW (1.63 HP), Fiber laser welding machine with 2000 watts of laser power 4-in-1 device: - Welding with automatic wire feed - Welding without wire - Cleaning - Cutting - Top-quality device at a great price from our showroom - Approximately 10 operating hours - 1.2 kW laser source - German-language menu - Universal device for welding/cutting/cleaning - Includes 4-roller wire feed system - Integrated water cooling - Immediately available Please also note our attractive leasing/hire-purchase offers. Machine dimensions (approx.): Hnedpfx Aszkrblel Tep Width: 40 cm Height: 600 cm Depth: 110 cm Weight: approx. 60 kg

Year of construction: 2006, condition: used, Colour: Grey Empty weight: 400 kg Dimensions (LxBxH): 170 x 132 x 113 cm - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: 1924 Hnodpfx Aszkqx Ael Top - Drive system: Conventional - Rotary table: Yes - Number of turbines [pcs]: 1 - Max. workpiece length [mm]: 600 - Max. workpiece height [mm]: 265 - Transport dimensions: 1700mm x 1320mm x 1130mm (l x w x h) - Transport weight [kg]: 400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, FOR SALE — SEMI-AUTOMATIC ANODIZING LINE BY DRABEX PRICE: PLN 1,000,000 Complete semi-automatic aluminium anodizing line for sale. The line is currently switched off and awaiting a buyer. It allows anodizing of aluminium profiles up to 6.20 m in length. Basic information: Tank length: 6.80 m. Tank width: 0.5 m to 1.4 m. Footprint required: 25 m x 10 m. Capacity in 3-shift operation: 2000 m². Line type: semi-automatic anodizing line. Line stations: Nr 1 – Loading and unloading Nr 2 – Hot rinse — 10 m³, gas diaphragm heating, thermally insulated tank Nr 3 – Rinse — 10 m³ Nr 4 – Sealing — 20 m³, tank with bubbler, galvanic filter connected Nr 5 – Rinse — 10 m³ Nr 6 – Rinse — 10 m³ Nr 7 – Rinse or electro-colouring — 20 m³, tank without equipment Nr 8 – Rinse — 10 m³ Nr 9 – Rinse — 10 m³, tank with bubbler, spray Nr 10 – Rinse — 10 m³ Nr 11 – Degreasing — 20 m³, gas diaphragm heating, tank with bubbler Nr 12 – Satin etching — 10 m³, tank with bubbler, diaphragm cooling, electric heating 3 x 5 kW Nr 13 – Satin etching — 10 m³, tank with bubbler, diaphragm cooling, electric heating 3 x 5 kW Nr 14 – Warm rinse — 10 m³, tank with bubbler, electric heating 2 x 5 kW Nr 15 – Warm rinse — 10 m³, tank with bubbler, electric heating 2 x 5 kW Nr 16 – Rinse — 10 m³, tank with bubbler Hnedpszkivgofx Al Tjp Nr 17 – Rinse — 10 m³, spray Nr 18 – Deoxidising — 10 m³, spray Nr 19 – Rinse — 10 m³, spray Nr 20 – Anodizing — 20 m³, tank with bubbler, galvanic filter connected, 22V / 7000A rectifier and plate heat exchanger with 150 kW cooling capacity, chiller unit 100 kW Nr 21 – Anodizing — 20 m³, tank with bubbler, galvanic filter connected, 25V / 8000A rectifier and plate heat exchanger with 150 kW cooling capacity, chiller unit 100 kW Interested buyers are welcome to get in touch. Referral reward: PLN 20,000. I will pay PLN 20,000 to whoever introduces the buyer who finalises the purchase, payable after full payment is received and the contract is signed.

Condition: used, functionality: fully functional, total length: 5,500 mm, total width: 2,500 mm, total height: 2,000 mm, Year of construction: 1992, Equipment: cooling unit, tail-lift, We offer a Van Waasdjik cylindrical grinding machine, manufactured in 1992. Processing diameter: 500mm Automatic processing length: 1000mm (manual operation possible for lengths exceeding 1000mm) Distance between centers: 1470mm Hodpfezkialox Al Tonp Supply voltage: 380 V Frequency: 50 Hz Control voltage (AC): 220 V Control voltage (DC): 24 V Nominal current: 25 A Supply line protection current: 35 A Electrical diagram: ES 91 042 Machine model: K 21

Year of construction: 2019, condition: good (used), Sturm Coating System Description: For sale is a used coating system manufactured by Sturm, formerly used at the Mercedes-Benz plant in Hamburg for processing rear axle carriers. Technical Data & Scope of Supply: Manufacturer: Sturm (system) / KUKA & Yaskawa (robots) Year of manufacture (main system): 2019 Hnodpfxezka Sfs Al Tsp Previous operation: 3-shift (condition commensurate with age) System components: Processing units, drying and cooling zones, paint booth, loading and unloading station Included robots / peripherals: Several spare KUKA robots (models KR 210L 150-2 / KR 210 2, years of manufacture 2006–2012) Associated robot control cabinets 2x Yaskawa robots EPX 2900 1x Thermal after-treatment / exhaust air purification system (VeniaKab / RNV) Condition Notes: Control technology: According to plant maintenance, it is state-of-the-art Electrical & mechanical systems: Mostly in good condition commensurate with age Cybersecurity data erasure: For security reasons, all hard drives from the robots and PC-based stations have been removed Dismantling from the Hamburg plant Dismantling and removal must be carried out entirely by the buyer Dismantling and loading by us is possible. If you do not have the necessary personnel or equipment for dismantling, we offer complete dismantling, professional removal from the hall, and loading as an additional service. Billing for this is based on agreement and actual effort. Please simply contact us in advance if interested. "Everything from a single source: We are happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs available upon request!

Year of construction: 2020, operating hours: 980 h, condition: used, functionality: fully functional, For sale is a used, but sparingly operated, JustLaser 7.5 with a 30-watt Synrad tube (effectively measured at approximately 40 watts) and a working area of 70 x 50 cm. The device is in top condition and ready for immediate use! Included are a JustAir Smart and a JustAir PRE filter system. The pyramid pre-filter in the PRE unit protects the fine filter in the Smart unit, which significantly reduces filter costs. Naturally, the sale includes the software and CorelDraw plugin from JustLaser for the convenient creation of templates and processing of engraving and cutting jobs. Included is the original scope of delivery, hoses, and tools. Also included are plenty of spare filters and filter mats, as well as activated carbon. Hnedpfezi Hfcox Al Tsp

Year of construction: 2006, condition: ready for operation (used), A compact, manual parts cleaning unit (brush wash table) IBS Scherer is offered, designed for the material-friendly cleaning of oil- and grease-contaminated metal and plastic parts. Max. load capacity: 50kg, Capacity: 50l, Working height: approx. 820mm, Working surface internal dimensions X/Y: 646mm/465mm, Weight: approx. 15kg, Machine dimensions X/Y/Z: approx. 656mm/475mm/1005mm. Inspection possible by appointment. Hedpfx Alszi Eiaj Tonp

Year of construction: 2025, condition: used, functionality: fully functional, laser power: 200 W, machine/vehicle number: ELXX-25100004, For sale is a professional, pulsed laser cleaning machine (pulse laser) of the type GL-PM-200 from the manufacturer EraserLaser GmbH. The unit dates back to the 2025 model year, has very few operating hours, and is in excellent, fully functional condition. In contrast to continuous CW lasers, this pulsed system is ideally suited for extremely precise and material-friendly cleaning. It is the ideal solution for demanding tasks where the base material (e.g., sensitive molds, historical components, weld seam preparation, or precision tools) must not be subjected to any thermal influence or material removal. Rust, paint, oils, and oxide layers are removed precisely and without leaving any residue. Product benefits & highlights: Maximum precision without heat input: Thanks to the fine adjustment of pulse width (20–500 ns) and frequency, the cleaning can be precisely tailored to sensitive surfaces. Compact & flexible: The laser is housed in a robust enclosure and can be ideally used in mobile applications. Extensive parameter control: Parameters such as laser power, scan speed, frequency, and track density (Spiral Series) can be precisely controlled via the intuitive 7-inch touch display. Quick access to memory locations: Up to 5 user-defined work modes can be saved to allow quick switching between different cleaning requirements in everyday work. Hnjdeziww Ajpfx Al Tjp Easy maintenance & care: Low maintenance thanks to reliable air cooling. Integrated preview laser for precise alignment of the cleaning area on the workpiece. Technical data at a glance: Model: GL-P-M-200 Laser type: Pulsed fiber laser (pulse laser), Laser Class 4 Wavelength: 1064 nm Laser power: 200 watts (continuously adjustable from 10% to 100%) Laser frequency: 5 kHz – 4000 kHz Pulse width: 20 ns – 500 ns Cleaning area (length x width): Variable, adjustable up to 100 mm x 20 mm Fiber length (hose assembly): 4 to 10 meters Cooling: Air-cooled Power connection: 220V AC (Schuko plug, fuse rating min. 16A) Condition & scope of delivery: Condition: Very well-maintained, used condition, hardly used, visually and technically flawless. The protective lens and optics are clean and fully functional. Scope of delivery: Laser cleaning system GL-P-M-200 including hose assembly and cleaning gun. Important safety note: Operating a system of Laser Class 4 requires the mandatory use of approved laser safety goggles (DIN EN 207 for the wavelength range of 1064 nm) as well as compliance with applicable occupational safety regulations (including respiratory protection/extraction).

Year of construction: 2025, condition: used, functionality: fully functional, laser power: 1,500 W, machine/vehicle number: ELKY-2504021, For sale is a professional, continuous laser cleaning machine (Continuous Wave) of the type GL-C-CWM-1500, manufactured by EraserLaser GmbH. The unit was manufactured in 2025, has very few operating hours, and is in excellent, fully functional condition. This system is ideally suited for the fast, thorough, and non-contact removal of rust, paint, oils, grease, and oxide layers from metallic surfaces. Thanks to its high power of 1500 watts and the particularly long hose package, the unit offers maximum flexibility in professional workshop or industrial environments. The exact, cumulative operating hours can be read transparently directly on the system display. Product advantages & highlights: High flexibility: The 15-meter-long fiber optic hose package enables comfortable working, even on large components, in hard-to-reach areas, or on scaffolding. Precise control: Parameters such as laser power, frequency, and beam width can be set precisely via the intuitive 7-inch touch display and saved as presets. Gentle surface treatment: The variably adjustable pulse rate allows the heat input to be regulated precisely – also ideal for more sensitive workpieces or thin sheets. Reliable cooling: An integrated Hanli water cooling system ensures stable temperature monitoring and enables trouble-free operation in continuous mode. Ergonomic cleaning gun: Equipped with a red preview laser for accurate alignment of the cleaning area and an automatic compressed air control to protect the optics from dirt particles. Technical data at a glance: Model: GL-C-CWM-1500 (mobile steel housing on heavy-duty rollers) Laser type: CW fiber laser (Continuous Wave), laser class 4 Wavelength: 1070 nm Laser power: 1500 watts (continuously adjustable from 10% to 100%) Laser frequency: 1000 Hz – 9000 Hz Hodpfx Aoziwwiel Tsnp Cleaning width: 1 mm to 150 mm (variably adjustable) Fiber length (hose package): 15 meters Power connection: 220V AC / 32A connection (protected with 25A) Condition & scope of delivery: Condition: Very well-maintained used condition, low operating hours, optically and technically flawless. Protective lenses and optics are clean and fully operational. Scope of delivery: Laser cleaning system GL-C-CWM-1500 including 15m hose package and cleaning gun. Important safety note: The operation of a system of laser class 4 requires the mandatory wearing of approved laser safety glasses (DIN EN 207 for 1070 nm) as well as compliance with applicable occupational safety regulations (including extraction).

Year of construction: 2021, operating hours: 500 h, condition: like new (used), DLyte PRO500 Dry Electropolishing System – Complete Set – Only 500 Operating Hours For sale: DLyte PRO500 by GPAINNOVA, a complete dry electropolishing / surface finishing system. The machine is in excellent condition, almost like new, with only approximately 500 operating hours. It has been used in a clean production environment and is fully functional. The set can be inspected and tested at our factory before purchase. Included in the set: Hnsdpfx Aljzilq Rs Tjp * DLyte PRO500 machine * SMC Thermo Chiller HRS150-AF-40 * Original workpiece holders / fixture system, as shown in the photos * Mobile holder trolley / storage system * Accessories, as shown in the photos Machine details: * Manufacturer: GPAINNOVA / DLyte * Model: PRO500 * Article No.: GP4012691 * Serial No.: 200300-000081 * Year: 10/2022 * Weight: approx. 1600 kg * Rated power: 25 kW * Voltage: 400 Vac, 3P + N + GND * Frequency: 50–60 Hz * Rated current: 35 A * Full-load current: 40 A * Air supply: 6–7 bar Chiller details: * Manufacturer: SMC * Model: HRS150-AF-40 * Year: 2023 * Cooling capacity: 5 kW * Power supply: 3-phase, 380–415 V, 50/60 Hz * Refrigerant: R410A * Weight: approx. 177 kg Condition: * Very low usage: approx. 500 operating hours * Excellent technical and visual condition * Ready for production * Tests can be performed at our factory before purchase Price: €250,000

Year of construction: 2021, operating hours: 500 h, condition: like new (used), functionality: fully functional, DLyte PRO500 Dry Electropolishing System – Complete Set – Only 500 Operating Hours For sale: DLyte PRO500 by GPAINNOVA, a complete dry electropolishing / surface finishing system. The machine is in excellent condition, almost like new, with only approximately 500 operating hours. It has been used in a clean production environment and is fully functional. The set can be inspected and tested at our factory before purchase. Included in the set: * DLyte PRO500 machine * SMC Thermo Chiller HRS150-AF-40 * Original workpiece holders / fixture system, as shown in the photos * Mobile holder trolley / storage system * Accessories, as shown in the photos Machine details: * Manufacturer: GPAINNOVA / DLyte * Model: PRO500 * Article No.: GP4012691 * Serial No.: 200300-000081 * Year: 10/2022 * Weight: approx. 1600 kg * Rated power: 25 kW * Voltage: 400 Vac, 3P + N + GND * Frequency: 50–60 Hz * Rated current: 35 A * Full-load current: 40 A * Air supply: 6–7 bar Chiller details: * Manufacturer: SMC * Model: HRS150-AF-40 * Year: 2023 Hjdpfxeziln As Al Tjnp * Cooling capacity: 5 kW * Power supply: 3-phase, 380–415 V, 50/60 Hz * Refrigerant: R410A * Weight: approx. 177 kg Condition: * Very low usage: approx. 500 operating hours * Excellent technical and visual condition * Ready for production * Tests can be performed at our factory before purchase Price: €250,000

Year of construction: 1993, condition: ready for operation (used), A solvent cleaning system AMA Universal is offered for cleaning, degreasing and drying metal and plastic parts. Inspection by appointment possible. Number of monitoring channels: 8, Solvent fill quantity: approx. 160l, Solvent weight: approx. 194kg, Tank volume: approx. 105l, Max. basket load: 80kg, Cycle capacity: up to 80kg/cleaning cycle, Cycle time: approx. 20min, Working chamber diameter: approx. 450×610mm, Loading opening diameter: approx. 450mm, Drum diameter: approx. 510mm, Drum depth: approx. 600mm, Air flow rate: 230m³/h, Steam pressure: 5bar, Steam temperature: 149°C, Water pressure range: 3-5bar, Compressed air connection: 6-7bar, Control: PLC. Inspection by appointment possible. Hnodpfxozhw S De Al Tjp

Year of construction: 2023, condition: ready for operation (used), A Mafac two-tank spray flood cleaning machine is available. Basket dimensions X/Y/Z: 660mm/480mm/338mm, max. batch weight: 100kg, tank volume 1/2: 425l/300l, machine dimensions X/Y/Z: approx. 1850mm/1400mm/1800mm, weight: approx. 1000kg, operating hours: 4531h. Documentation available. An on-site inspection is possible. Hnsdpozhnrhjfx Al Tsp

Condition: excellent (used), Year of construction: 2010, Pellet production line for sale !!! Capacity - 4 t/ h with two presess ! Hnodpezhichefx Al Top Now in production - one press 132 kw Double boiler with dryer 2t/h ( each ) All other deetils you can find on pictures !!

Year of construction: 2023, condition: ready for operation (used), A complete PVD hard coating system including peripheral equipment is available. 1) PVD hard coating system Platit Pi111 Plus G3, year of manufacture: 2023, deposition process: ARC, cathodes: 2, targets: 2, max. coating diameter: 353mm, max. coating height: 498mm, max. load: 160kg, max. workpiece diameter: 355mm, machine dimensions X/Y/Z: approx. 1950mm/1600mm/2250mm, control system: Platit. 2) Screw compressor Almig F-Drive 22, year of manufacture: 2022, flow rate: 4.14m³/min, final pressure range: 5bar-13bar, motor power: 22kW. 3) Compressed air receiver OKS, year of manufacture: 2023, volume: 1000l, operating pressure min./max.: 0bar/11bar, test pressure: 16bar. 4) Blast cabinet MHG SMG50, year of manufacture: 2024. 5) Osmosis Pro water filtration unit. Documentation available. An on-site inspection is possible. Hnjdpfszhb Hlox Al Tep

Year of construction: 2012, condition: used, functionality: fully functional, We are offering this used, fully functional MAFAC KEA spray cleaning machine, manufactured in 2012, for sale. The machine comes from a company acquisition. Complete documentation is available, and all maintenance intervals have been observed and carried out by the manufacturer. Features include a 1-tank system, 5-sided spray cleaning, a load capacity of 100 kg, and compatibility with Euro standard baskets (608 x 408 x 300). It has a heating capacity of 10 kW, an integrated hot air drying system, and a user-friendly Siemens S7 control system with plain text display. If you have any questions or require further information, please feel free to send us a message or call us. Hnjdpfx Aljzg Uq Ie Tep

Condition: excellent (used), Oven OMIA SECOMAT V-10 Maxi temperature: 160° Internal dimensions: 1000 x 1000 x 1000 mm Equipped with 1 small trolley Voltage: 380 V Hsdpfozg Hvcox Al Tenp Width: 2000 mm Depth: 1500 mm Total height: 2000 mm Weight: approx 1 T MACHINE IN VERY GOOD CONDITION

Condition: like new (used), DYEMANSION Type: POWERSHOT C 2.0 This system has never been put into operation. (like new!!) Hnjdjzgr T Topfx Al Tep Dyemansion Powershot C blasting cabinet Gentle surface cleaning of powder-based plastic components DYEMANSION POWERSHOT C 2.0 Year of construction: 2021 The industry standard for simple and efficient powder removal Automated powder removal increases your production capacity With the Powershot C, a medium-sized build volume can be depowdered in just ten minutes. The time you need for part cleaning and the personnel in your production can be significantly reduced. This increases your efficiency. By investing in the automated powder removal with the Powershot C, up to four manual blasting systems can be replaced. Gentle surface treatment thanks to intelligent hardware functions The blasting cabinet of our Powershot C is equipped with a rotary basket and lined with stainless steel. Different blasting nozzles and an ionization system ensure reproducible results. A basket with a soft, replaceable liner protects the parts from damage during the process. Two simultaneously operating blasting nozzles are arranged perpendicular to the rotating basket and the parts it contains. This configuration guarantees efficient powder removal. High user comfort with improved ergonomics and process control Experience a new level of process control with a touchscreen and integrated control panel. The Powershot C is operated via a user-friendly interface and pre-installed programs can be started. Individual programs can be easily configured and saved. Thanks to the user-centered design, everything is easily accessible and safe to use. Continuous monitoring enables an efficient and reproducible process. Technical data: POWERSHOT C AUTOMATION Individual programming, control and monitoring of process parameters via control panel and touchscreen. PERFORMANCE: Cycle time: Variable from 1 to 40 minutes, typical cycle time 3 to 10 minutes Capacity per cycle: Up to 3/4 EOS P396, 1x HP Jet Fusion 4200/5200 or almost 1.5x full Stratasys H350 build volume Effective volume of the basket 26 liters DIMENSIONS: System (L x W x H) 1700mm x 1310mm x 2030mm Recommended space requirement in operation (L x W x H) 2500mm x 2915mm x 2300mm WEIGHT: System 480 kg Power: 1kW Requirements 3x400V > 1kW 50Hz 2.5A COMPRESSED AIR: Consumption Minimum: 1.4m³/min at 2.2bar Maximum: 1.8m³/min at 5bar NOISE EMISSION: Sound level < 80dB(A) Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2020, condition: ready for operation (used), A handheld pulse laser cleaning machine is available. Laser source: Raycus RFL-P200, laser power: 200W, cooling medium: water, frequency: 50kHz, max. speed: 10m/s, max. cleaning width: 50mm. The machine is a demonstration unit with few operating hours. Documentation available. An on-site inspection is possible. Hjdezfaaxopfx Al Tjnp

Year of construction: 2023, condition: ready for operation (used), An HGH ultrasonic cleaning system is available. Chamber dimensions X/Y/Z: 600mm/500mm/400mm, basket dimensions X/Y/Z: 570mm/470mm/290mm, usable volume: approx. 120l, tank volume: 160l, ultrasonic power: 1200W. Documentation available. An on-site inspection is possible. Hnodozd Eipspfx Al Tsp