Machinehandel Eersel

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 460 mm, controller manufacturer: fanuc, controller model: Fanuc OMC, workpiece length (max.): 1,500 mm, workpiece width (max.): 300 mm, workpiece height (max.): 400 mm, total height: 2,750 mm, total length: 2,800 mm, total width: 3,550 mm, overall weight: 6,500 kg, number of slots in tool magazine: 10, Equipment: chip conveyor, documentation/manual, 3-axis vertical machining center with a central partition that divides the machine bed in half. Used machine, but in working order. It has two independent access doors, allowing the machine to be used with the partition acting as a pallet changer, or alternatively, the partition can be easily removed to process long parts up to 1500mm in length. Bwjdez Ipakepfx Ah Nju The machine is still connected to the power supply and can be seen in operation.

Condition: good (used), Year of construction: 2005, functionality: fully functional, spindle speed (max.): 12,000 rpm, coolant supply: 10 bar, The machine is equipped with a chip conveyor. Bwjdpfxjz Iii Es Ah Nju

Condition: ready for operation (used), Year of construction: 2019, operating hours: 1,400 h, travel distance X-axis: 520 mm, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis Hurco VC500i was manufactured in 2019. It features a robust control unit with WinMax software, ensuring efficient operation. The machine includes additional equipment such as a chip conveyor and a Spaleck finishing unit, enhancing productivity. If you are looking to get high-quality machining capabilities, consider the Hurco VC500i vertical machining centre we have for sale. Contact us for further details. Bwodpfxoz Hzbds Ah Nsu - AC Volts: 400 V- Phase: 3 Phase- Frequency: 50 Hz- Largest Motor: 9 KVA / 12 AMP- Full Load: 34 KVA / 49 AMP- Interrupt Capacity: 10000 AMPS- Short Circuit Current: 20 kA RMS Symmetrical- Max Ambient Temp: 35 DEG. C- Diagram No.: 003-4610-110- Control Unit / Software: WinMax (System Konfiguration)- Additional Equipment: Chip conveyor, Spaleck finishing unit/container, compressed air/coolant system line

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, controller manufacturer: FANUC, total height: 3,120 mm, total width: 2,500 mm, overall weight: 6,000 kg, spindle speed (max.): 13,000 rpm, number of slots in tool magazine: 20, product length (max.): 4,000 mm, number of axes: 3, This 3-axis Enshu ES400 was manufactured in 2006. It features a spindle speed of 13,000 rpm and a tool magazine capacity of 20 tools plus 1 in spindle. The machine has an X-axis travel of 500 mm, Y-axis travel of 400 mm, and Z-axis travel of 380 mm. If you are looking to get high-quality milling capabilities, consider the Enshu ES400 vertical machining centre we have for sale. Contact us for further details. Bodpfsz Hm A Tjx Ah Nowu • Number of axes: 3+2 • Tool holder: HSK-A40 / B50 • Tool magazine capacity: 20 tools + 1 in spindle • Cooling pressure: 40 bar • Electricity consumption: 18 kWh • Compressed air consumption: 12.48 m³/h • Documentation: Electrical user manual (Yes), Mechanical user manual (Yes) • Availability: 4 units available (all units from 2006 per description) • Unit #209: 38,000 h | Refs: 03C180 / #209 / MF-960064 • Unit #217: 36,000 h | Refs: 04C026 / #217 / MF-960057 • Unit #228: 40,000 h | Needs refurbishment | Refs: 04C231 / #228 / MF-960050 • Unit #262: 37,000 h | Needs refurbishment | Refs: 05C445 / #262 / MF-960049 Additional equipment • Tsudakoma RTT-206 rotary table (rotary/4th-5th axis) • Chip conveyor: included; dimensions (L x W x H): 5,800 x 1,200 x 1,600 mm; weight: approx. 2,000 kg

Condition: repair required (used), Year of construction: 2008, operating hours: 25,000 h, functionality: not functional, machine/vehicle number: 191-65, workpiece length (max.): 400 mm, workpiece width (max.): 400 mm, workpiece height (max.): 400 mm, workpiece diameter (max.): 350 mm, overall weight: 8,700 kg, spindle speed (max.): 20,000 rpm, number of spindles: 1, Equipment: chip conveyor, documentation/manual, 2008 CHIRON FZ 15KS High Speed Plus 5-axis vertical machining center with Heidenhain CNC control. Machine weight approximately 8,700 kg. Chip conveyor included. The spindle is defective and has been removed. The spindle and available related components are stored in wooden crate and are included in sale. The spindle requires repair,rebuilding. The machine is sold as-is and where-is. Inspection is available in Ankara,TURKEY. Bwjdpfx Ahsz Hmb Ae Nju Asking price: EUR 30.500, negotiable. EXW Ankara.

Condition: excellent (used), Year of construction: 1998, Control system: Fanuc OM Travel ranges X/Y/Z: 450 x 300 x 400 mm Bwedpfxsz Hfp Ee Ah Neu Table size: 600 x 300 mm Spindle speed: 8,000 rpm Tool magazine for 16 tools, SK 30.

Condition: good (used), Year of construction: 2006, Used milling machine from Hartford Type: VMC-1600S Heidenhain iTNC530 CNC control X = 1600 mm Bwsdpfx Ahsz Hbf Nj Neu Y = 800 mm Z = 660 mm Table dimensions: 1700 x 750 mm / max. 2000 kg 20-tool automatic tool changer Equipped with a 4th axis on the table

Condition: like new (used), Year of construction: 2023, operating hours: 268 h, functionality: fully functional, controller manufacturer: Siemens Sinumerik one, total height: 2,900 mm, total length: 3,000 mm, total width: 2,700 mm, table width: 550 mm, table height: 510 mm, table length: 550 mm, overall weight: 5,600 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 485 h, spindle motor power: 13 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, DMG MORI IoTconnector and NETservice Chip conveyor Renishaw probing kit Coolant spray gun Job Shop package for SIEMENS SINUMERIK ONE Tropical package Option includes: • Active cooling unit for the control cabinet • Additional fan in the operator panel Recommended for ambient temperatures from 35°C up to a maximum of 45°C Tool holder for SK40 DIN69871 Tool holder SK 40 for pull stud DIN 69872 Electronic handwheel External electronic handwheel Software option: DXF import Software option - DXF Import Allows opening DXF files directly on the controller to extract contours and import them into the program. Bwjdpfx Ahjz E U A Eo Nou RMS device (Relocation Machine Security) Documentation - 1, German Screen display, German/English

Condition: excellent (used), Year of construction: 2018, 2018 Fanuc Robodrill D21MIB5 Twin Robot Machining Cell with (2) Fanuc Series 31I-Model B5 CNC Controls Cell Comprising: Twin Fanuc Robodrill Type A04B-0104-B181 Vertical Milling & Drilling Machining Centres (S/Nos. P186ZG729 & P186ZG731). Table Size Approx 650mm x 400mm. Travel: 'X' Approx 500mm, 'Y' Approx 400mm, 'Z' Approx 330mm. Max Table Load 300kg. Number of Tool Pockets 21. Max Tool Length 250mm, Max Tool Weight 3kg. BT30 Spindle Taper. Max Spindle Speeds 10,000 RPM. Nikken TAT-170N (2018) Pneumatically Operated Rotary Support Table with 4th Axis Fanuc DDRiB-104-B181STD. ABB Flexloader SC3000XL Extended Conveyor Loading System (S/No. M180057-1) with Fanuc ABB 6 Axis Robot IRB 4600 & Fanuc ABB 6 Axis Feeder Robot IRB 1200 with Schunk Grab. Feed In/Feed Out Belt Conveyors. ABB Flexloader Vision. FSE E7326 Filtration, 950 Litre Capacity Coolant & Swarf Management System. Andreas Maier AMF 6906/61919 Hydraulic Equipment. Bsdpfx Ahsz E Sbre Newu This Cell Includes: Euro 250 Bowl Feeder on Stand with CVIC Digital Control. Desoutter ECS16-M20 Current Controlled Screwdriver. Robot Pendant ABB DSQC 679. Signal Tower Lights. Transformers. Weight of each Machining Centre Approx 2,400kg. Floor Space Required for Full Cell Approx 8,000mm x 6,500mm. 3 Phase Power Supply, 415 Volt. Fixtures Not Included. Swarf Bins Not Included. Viewing Recommended.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2570709, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 380 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, controller manufacturer: Siemens, controller model: 828d, total height: 2,180 mm, total length: 1,800 mm, total width: 1,600 mm, table width: 300 mm, table length: 700 mm, table load: 150 kg, rotational speed (max.): 12,000 rpm, overall weight: 2,200 kg, spindle speed (max.): 12,000 rpm, spindle nose: BT30, number of spindles: 1, number of slots in tool magazine: 16, tool length: 200 mm, tool diameter: 63 mm, tool weight: 3,000 g, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, SYIL X7 – CNC Machining Center – Showroom Machine – 4th and 5th Axis Lehmann Bodpfx Ahsz Eh I Us Nswu For sale, a vertical CNC machining center, SYIL X7, a showroom machine in excellent condition. The machine is equipped with a 4th and 5th axis Lehmann, a Swiss manufacturer renowned for its high-precision rotary systems. This configuration enables machining on multiple faces and the production of complex parts with a reduced number of setups. Main equipment: SYIL X7 vertical machining center Siemens SINUMERIK 828D CNC control 4th and 5th axis Lehmann Schneeberger mineral cast frame THK linear guides and ball screws 16-tool automatic tool changer Integrated coolant system Automatic centralized lubrication Fully enclosed cabinet Work area lighting Condition: showroom machine Machine can be viewed powered up and is available for demonstration in our showroom in Le Locle, Switzerland. Selling price with 4th and 5th axis Lehmann: CHF 95,300.– (excluding VAT) Commissioning, training, and after-sales service are available through Swiss Machines Tools, the SYIL distributor in Switzerland. An excellent opportunity to acquire a compact machining center equipped with a genuine 4th/5th axis Lehmann system at a particularly attractive price. Contact us for the complete technical data sheet, detailed equipment list, available options, and any additional information.

Condition: used, Year of construction: 1998, functionality: fully functional, VMC 600, used. Bwodpfxsz Ehnue Ah Nsu

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 550 mm Bsdjz D Taajpfx Ah Nswu Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Distance, pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Tool clamping force: 7.0 kN Tool changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Condition: used, Year of construction: 2012, 2012 Feeler HV-800 CNC Machining Center with Fanuc 18i-MB Controller X/Y/Z: 800/520/505 mm. 4th axis Unit: Peiseler AWUP 160. Table size: 950 x 520 mm. Spindle r.p.m: 15,000 r.p.m. Spind taper: BigPlus 40. Tools magazine: 30 pcs. Machine S/No: HVG044. Bwedpfoz Dt N Uex Ah Nsu

Condition: used, Year of construction: 2022, operating hours: 1,464 h, CNC CONTROL Controller: Fanuc Series 31i-MODEL B5 Plus AXES Number of controlled axes: 3 Number of simultaneous axes: 3 X-axis travel mm: 700 Y-axis travel mm: 400 Z-axis travel mm: 330 Distance spindle nose - table surface mm: 250–580 Feed rates m/min: 30 Rapid traverse m/min: 54 Positioning accuracy mm: < 0,006 Repeatability mm: < 0,004 WORKTABLE Bjdpfoz Dpk Ujx Ah Newu Table dimensions mm: 850 x 410 Max. table load kg: 300 SPINDLE Max. spindle speed rpm: 10.000 Spindle power kW (S1/S6): 14,2 / 4 Spindle taper / interface: BT30 (BIG-PLUS BBT30) TOOL SYSTEM Tool magazine capacity: 21 Max. tool diam. (free adj. places) mm: 80 Max. tool length mm: 250 Max. tool weight kg: 3 Chip-to-chip time s: 1,6 MACHINE RUNNING TIMES Spindle working hours: 1.464

Condition: like new (used), Year of construction: 2008, operating hours: 4,322 h, functionality: fully functional, FANUC ROBODRILL α-T21iF | 4,322 hours | 24,000 rpm | BT30 FANUC ROBODRILL α-T21iF – High-Speed CNC Machining Center A very well-maintained FANUC ROBODRILL with very low operating hours – approximately 4,322 run hours. The machine was manufactured in Japan in December 2008 and is equipped with a FANUC Series 31i-Model A5 CNC control, a high-speed 24,000 rpm spindle, and fast axis movements of up to 54 m/min. The machine is in very good technical and visual condition and can be inspected and demonstrated under power by prior arrangement. Approximately 50 pcs. of BT30 tool holders of various types and sizes are included in the price. Technical specifications Manufacturer: FANUC Model: ROBODRILL α-T21iF Type: A04B-0099-B112#BM Year of manufacture: 12/2008 Country of origin: Japan CNC control: FANUC Series 31i-Model A5 Run time: approximately 4,322 hours X-axis travel: 500 mm Y-axis travel: 400 mm Bwsdpez Diqbjfx Ah Neu Z-axis travel: 330 mm Rapid traverse X/Y/Z: up to 54 m/min Maximum spindle speed: 24,000 rpm Spindle taper: BT30 Automatic tool changer: 21 positions Maximum table load: 300 kg Machine weight: approximately 2,100 kg Power requirement: 10 kVA Power supply: 3-phase, 200/220 V, 50/60 Hz CE marked: Yes Included in the price Approximately 50 pcs. of BT30 tool holders / clamping holders of various types and sizes. IMPORTANT The rotary table / 4th axis shown installed in the machine in the photographs is NOT included in the sale. The machine is available for inspection and demonstration under power by prior appointment.

Condition: used, Year of construction: 2022, travel -x axis 550 mm travel -y axis 400 mm travel -z axis 400 mm a-axis +/- 120 ° C-axis 360 ° control HEIDENHAIN - TNC 640 number of spindle speeds 24.000 numbers of positions in the tool changer 48 tool taper HSK-A50 5-axis simultaneous machining center | CHIRON - FZ12-S equipped with ITC (70 bar), NC swivel rotary table, 48-way tool changer & chip conveyor. Bedpfx Asz Dbyheh Njwu The machine has only 3.606 H spindle hours. Additional equipment: - BLUM LaserControl NT - BLUM TC52 Touch Probe - Scraper Belt Chip Conveyor - KF150/500 Cooling System The machine is in very well-maintained, like-new condition and can be inspected under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FZ12S| FZ 12-S | FZ 12 S

Condition: used, Year of construction: 2004, operating hours: 11,041 h, functionality: fully functional, machine/vehicle number: 132-37, nominal power (apparent): 28 kVA, controller manufacturer: Siemens, controller model: Sinumerik 840 D, overall weight: 9,600 kg, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer this used Chiron FZ 15K W vertical machining center, manufactured in 2004. It is equipped with a rotary table, and each of the two tables features a high-quality NC swivel table with a clamping bridge/zero-point clamping system from the manufacturer Spreizer. It was primarily used to manufacture smaller stainless steel parts. -Zero-point clamping system -Clamping/releasing pneumatically/hydraulically via push-button -Reneshaw TS 27 R for length measurement and breakage monitoring Sinumerik 840 D control system -Chip conveyor -The machine was operated exclusively with coolant and cutting oil. Bwjdpjz Dbtzofx Ah Nsu -The machine is equipped with a fire extinguishing system from Kraft und Bauer, which was regularly serviced by Kraft und Bauer. -The machine has age-related and usage-related wear and tear. It was primarily operated in a single-shift operation. It was regularly serviced and maintained by Chiron. We assess the optical condition as very good. The machine is immediately ready for full operation. Hour counter: 11041 hours Year of manufacture: 2004 Weight: 9600 kg Power supply: 3/N/PE Frequency: 50/60 Hz Operating voltage: 400 V Control voltage: 24 V Power: 28 kVA Rated current: 45 A Fuse: 50 A slow-blow/quick-blow If you have any questions or need more information, please send us a message or call us.

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 427-13, travel distance X-axis: 2,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, total height: 3,000 mm, total length: 4,000 mm, total width: 3,050 mm, overall weight: 6,700 kg, spindle speed (max.): 10,500 rpm, spindle mount: MK 4, Equipment: 3rd hydraulic function, documentation/manual, The main spindle was replaced approximately 700 hours ago! The machine can be tested on site. Bedez A U Rwepfx Ah Nowu EQUIPMENT: Coolant system and internal cooling Chip conveyor Hydraulic unit Travel in X-axis: 2,000 mm Travel in Y-axis: 400 mm Travel in Z-axis: 425 mm Table length: 2,280 mm Table width: 450 mm Spindle speed: 10,500 rpm Number of tools: 20 Control system: SIEMENS SINUMERIK 810 M

Condition: used, Year of construction: 2002, Chiron FZ 15 W High Speed Twin Pallet Vertical Machining Centre. Serial No. 147-18 (2002) with Fanuc Series 18i-M Control, Dual Peiseler AWUP 160 NC Rotary Units, Air Bench Mist Filtration Unit, Swarf Conveyor. Country of Origin: Germany Location: These lots are located in Sheffield, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Bedpfxoz Ar Eze Ah Nowu

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller manufacturer: Siemens, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X: 560 mm Travel range Y: 410 mm Travel range Z: 410 mm Clamping area: 650 × 410 mm Bodpfsz Ahxqox Ah Nswu Table load: 250 kg Spindle speed: 12,000 rpm Tool holder: SK 40 MACHINE DETAILS Control system: Siemens

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm Bodozz S R Uspfx Ah Njwu z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 Used, untested Additional information – Machine weight: approx. 4,200 kg Dimensions (L x W x H): approx. 2,400 x 2,400 x 2,500 mm Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: like new (used), Year of construction: 2016, operating hours: 1,900 h, functionality: fully functional, number of slots in tool magazine: 21, Equipment: chip conveyor, Fanuc vertical machining center Model: Robodrill α-D21LiB5 Year: 2016 Table size: 850 x 410 mm X-axis travel: 700 mm Y-axis travel: 400 mm Z-axis travel: 330 mm Tool magazine capacity: 21 Control unit: Fanuc 31i model b5 Bsdpfx Ahezz R Ekj Newu Spindle speed (main spindle): 100-10000 rpm Spindle taper: BBT30 Spindle power: 11 kW High-pressure coolant system through the spindle: 15 bar Chip conveyor (belt type) Air blow through the spindle for dry machining 4-axis continuous table Maximum workpiece weight (spindle): 300 kg

Condition: good (used), Year of construction: 2006, operating hours: 37,000 h, functionality: fully functional, number of slots in tool magazine: 60, Equipment: documentation/manual, 5-axis machining center MAZAK VARIAXIS I 500 with pallet changer Bwedszz R Acjpfx Ah Nsu Year: 2006 Numerical control: Mazatrol Matrix Controlled axes: 5 continuous axes X-axis travel: 510 mm Y-axis travel: 510 mm Z-axis travel: 460 mm A-axis: -120° / +30° C-axis: 360° Table size: 500 x 400 mm x 2 Maximum load on the table: 300 kg Distance from spindle nose to horizontal table: 190 - 650 mm Distance from spindle nose to vertical table: 140 - 600 mm Maximum spindle speed: 12,000 rpm Spindle power: 22 kW Tool magazine capacity (automatic tool changer): 60 Chip conveyor

Condition: used, 20-position tool changer Bwsdjzz Hqvspfx Ah Nou Operating hours: approx. 5,886 hours Footprint: approx. 1700 x 2500 x 2700 mm

Condition: used, Year of construction: 2003, Control system: MSG-501 Machine weight: approx. 6,700 kg Operating hours: 1,507 h Footprint: approx. 2,600 x 200 x 3,400 mm X-axis travel: 800 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Table-to-spindle distance: 150–660 mm Table size: 1,100 × 600 mm Table load capacity: 1,000 kg T-slots: 6 × 18 mm Max. spindle speed: 8,000 rpm Optional spindle speed: 15,000 rpm Bjdpfx Aezz Hnueh Nowu Spindle taper: No. 50 / BT-50 or CAT-50 Spindle bearing inner diameter: 100 mm Rapid traverse X/Y/Z: 42,000 mm/min Cutting feed rate: 1–6,000 mm/min Tool magazine: 30 tools Optional tool magazine: 60 tools Max. tool diameter: 120 mm Max. tool diameter without adjacent tool: 240 mm Max. tool length: 350 mm Max. tool weight: 20 kg Spindle motor: 30 / 25 kW Coolant tank: 230 l Electrical connected load: 55.6 kVA Machine height: 2,640 mm Space requirement: 2,728 × 2,620 mm Machine weight: approx. 6,700 kg