René Reiser | Grafische Maschinen

Condition: used, Year of construction: 2000, impressions ca. 3 Mio. max. printing speed sheets 12.000 /h max. paper size 660 x 470 mm 2-colour offset printing machine Sakurai 266 EP2 Total approx. 3 million prints Sheet format min. 297 x 257 mm Sheet format max. 660 x 470 mm Printing speed: max. 12,000 sheets/hour Total weight: 5,500 kg Perfecting device: 2-0 / 1-1 printing Special cardboard guides for substrates up to 600 gr/sqm Gjlhcdwewi Irtsvebl - Suction belt feeder - SPC semi-automatic plate changer - Olivermatic dampening unit with Technotrans circulation - Remote side and circumferential register adjustment - Diagonal register adjustment - Normal pile delivery The ink- and dampening rollers were replaced in 2019.

Condition: excellent (used), Year of construction: 2011, buckles 2 st. max. paper size 35 x 65 cm Golhcdwowhzv Novebl 2-pocket folding machine (2nd folding unit!) Multigraf Eurofold 235 Year of construction 2011 Sheet format max. 350 x 650 mm Sheet format min. 90 x 120 mm - New rubberised folding rollers - Machine technically checked - Inclined roller table - 2-fold plates - creasing tool - shingle delivery - mobile underframe

Condition: used, connected load frequency 230 V Perforating/creasing machine Grafiscor Year of manufacture unknown Working width up to approx. 42 cm Gjlhcdwjwfxlcjvsbl - Underfloor suction feeder - Alignment section with ball bar - Delivery The machine was assembled by the previous owner from various devices/parts as a self-construction.

Year of construction: 2012, Condition: used, UV drying tunnel MGI Gbelhcdwjwd Hcmjvol

Condition: used, UNITRONICS Display V570-57-T20B Gbolhcjwbvm Nodwvjl Functional

Condition: good (used), Year of construction: 2021, working space max. 800 x 600 mm Working Space min. 210 x 297 mm Gbjlhcdwjv Uq Uijvsl PFi Blade B2+ Digital cutting table - incl. Software Working area min. 210 x 297 mm Working area max. (without use of CCD camera) 800 x 600 mm Working area max. (with use of CCD camera) 770 x 570 mm Grammage 120 - 500 g/m² (depending on tool use) Cutting thickness Up to 6 mm (depending on material) Cutting speed Up to 1200 mm/second Cutting tolerance +/- 0.3 mm System capacity 100 mm Power supply 220 V, 50 Hz, 20 A

Condition: good (used), Year of construction: 2003, buckles 4 0 knives 1 0 Total counter ca. 8,2 Mio Horizon AFC-544AKT Folding machine with cross fold - Total counter only approx. 8.2 mio - Freshly rubberized Rollers in the cross fold unit Gjlhcdwjv Uq Ucjvebl Technical data: 4 Buckles + Fold Knife + 2 Buckles Below Knife - Max. Sheet size: 540 x 750 mm - Min. sheet size: 128 x 148 mm

Condition: excellent (used), Year of construction: 2011, cutting width 55 cm feeding depth 57 cm feeding high max. 95 (92) cm HYDRAULIC PILE CUTTER "Krug & Priester" EBA 551-06 LT Included spare knife TECHNICAL DATA Cutting length in mm 550 Insertion height in mm 95 / 92 Insertion depth in mm 570 Front table depth in mm 4 60 Connected loads in Volt/Hz 2 30 / 50 Motor power (rated input in kW) 1.5 Dimensions W x D x H in mm 1 070/1630 x 1400 x 1370 Weight in kg 350 Gbolsv T Ndmehcdwvol *all specifications without guarantee!

Condition: used, max. envelope size 36 x 36 cm max. speed 15000 /h Envelope feeder Schneider SF-80 Can be used on single-sheet or stream feeders Format max. 360 x 360 mm Format min. 100 x 100 mm Speed max. up to 15,000 cycles/hour Gslov S Iunjhcdwvebl Incl. height-adjustable delivery belt

Condition: good (used), max. paper size max. 520 x 1050 mm max. paper weight 500 g/qm connected load frequency 230 V Automatic Pile Feeder Multigraf PFA-52 (originally) - Own drive and vacuum pump (230V) - Side-lay register - Modularly expandable and customizable - with extra long feed table Paper format max. 520 x 1050 mm Grammage range up to approx. 500g/sqm The feeder was previously operated in combination with a UV varnishing machine. Gbjlhcdsv Rrr Uowvol

Year of construction: 1983, Condition: used, power 380/50 V / Hz. Gbjlov Dx D Rohcdwvol

Condition: refurbished (used), Year of construction: 2017, Number of working hours 2400 h Pressure power 110000 kg Speed 2500/2700 Sheets/h On offer here is a punch with hot foil from the brand APR Solutions. The machine is offered including warranty from the manufacturer! Model: Saroglia FUB/D 56x74 - Format: 56x74 cm - Year of manufacture: 2017 - Condition: Refurbished by the manufacturer (electronics as original) - Operating hours: 2400 - Feeding and delivery: Automatic - with hot foil Gbelsv Dx Dwehcdwvjl - Punching: Up to 5 mm thickness - Speed: 2500/2700 sheets/hour - Paper weight: 80 - 1800 gr/sqm - Pressure force: 110000 kg (110 tonnes) If you require further information, please contact us at any time!

Condition: used, For sale is a CITO RSP Inline Finishing System which is for a Heidelberg CD-74. The system is used. Gbolhcdjv Da Uwowvjl Condition and content can be seen in the pictures.

Condition: used, Year of construction: 1996, max. paper width 520 mm min. Paper width 178 mm speed max. 200 m/min Technical data HPF-660 - Paper weight: 60 - 160g - Paper temperature: 20° +/- 5° - Paper moisture: 15 - 50% relative humidity - Paper web width: Min. 178 mm; Max. 520 mm - Mechanical speed: Min. 10 m/min; Max. 200 m/min; Set-up mode 5 m/min - Production - Speed: With flying folder max. 100 m/min; With flying folder module 100 m/min - Compressed air connection: 6 bar - Drive power: DCU 075 7.5 KW DCU 150 15.0 KW - Back-up fuse: DCU 075 max. 80A, 50/60 Hz DCU 150 max. 100A, 50/60 HZ - Temp. range workshop hall 10 - 25° Equipment: Paper unwinding station RUM 660 - max. paper weight: 60 - 160g - max. paper width: 660 mm - min. paper width: 178 mm - max. max. roll diameter: 1270 mm - inside core diameter: 70 mm and 150 mm insetter INF 660 - formats: 20", 24", 25", 28", 32" - consisting of print mark reader, web edge control and web infeed device with register control. DM 660 die-cutting module Magnetic die-cutting cylinder with: - max. die-cutting width: 660 mm - format: 24" and 20" - die-cutting plate thickness: 0.58 mm - suction unit for die-cutting cut-outs AM 660 application module - with lateral roll unwinding for register-controlled application of unprinted webs, labels, silicone paper, foils, etc. minimum dispensing length 1 inch - format set 24 inch pitch for format 4" / 6" / 8" / 12" - format set 20 inch pitch for format 6 2/3" / 5" / 10" Turning module WTM 660 - for turning the paper web by 180° while maintaining the running direction Glue module_GM-V 660 - for partial gluing of the paper web with dispersion glue - Formats: 20-28" gluing cylinder - 2 plow folding stations for one-sided or double-sided longitudinal folding of the paper web with longitudinal cutting device and longitudinal perforation - device for longitudinal creasing Cross perforating module CPM 660 - Punch insert 24 inch Cross cutting module CM 660 - with pull-out belt and cross cutting cylinder - Formats: 32 inch pitch 8" - 16" 28 inch pitch 4 2/3" - 7" - 9 1/3" - 14" 25 inch pitch 4 1/6" - 8 1/3" - 12 1/2" 24 inch pitch all 2 inch pitch possible 6"- 12" 20 inch pitch 5 - 6 2/3" - 10" - Sheet delivery Star wheel system for formats 5" / 6" / 6 2/3" / 12" Hot glue from Reuther / HHS / Beckhoff C-1001 2x glue nozzles systems HM 200 B22 Goljvzt Hhohcdwvobl Special equipment: Invested for DHL parcel label, DIN A4 with back gluing, wrap fold 2x label dispenser from ETI Pack Energy 100 *All information without guarantee!

Condition: used, Year of construction: 1991, width 520 mm no. of working stations 5 Stück Features: - Paper unwinding for max.: 127 cm roll diameter - maximum paper width: 540 mm - maximum print width: 520 mm - core diameter: 70 mm - paper weight: 70 - 170 g/m - Compressed air expansion axes for 70 mm core diameter - Web edge control unit with remote adjustment - 5 wet offset printing units variable from 20 inch to 25 inch with straight web run - Printing: 5/0 color; 4/1 color; 3/2 color - 5 wet offset printing units 24 inch cylinder circumference - Offset plate thickness: 0.3 mm - Clamping channel: 9.0 mm - Turning cross between printing units 1 and 2 - Turning cross between printing units 2 and 3 Tool group - Preferred device 24 inch - Filing hole insert for serrated perforation - Set of perforated disks for double use - 24 inch production - for head-side filing perforation at 4/ 6 / 8 and 12 inches - A letterpress unit for numbering and coding can be installed in the filing hole station can be installed. Remaliner - punching station - 6 single-row pin disks (HSS for smooth punching) - 2 double-row die disks - 2 single-row die disks Edge trimming - Longitudinal perforation device for max. 11 perforations - Cross perforation device for 2 cylinders - Perforation cylinder circumference 24 inches, pitch 2/ 4 / 6 / 8 and 12 inches - Endless folder variable from 6 inch to 18 inch - Rewind for 127 cm roll diameter - 2 air clamping axles 70 mm diameter - Light flash troposcope - additional hand-held troposcope for backside observation - max. running speed: 400 m/min roll/fold; 450 m/min roll/roll - max. production speed: 350 m/min roll/fold; 400 m/min roll/roll Grid rewinder from Schober - Max. Working width: 520 mm - Max. Paper web: 500 mm - Max. Grid winding 600 mm All information without guarantee! Gjlovzcq Ajhcdwvsbl

Condition: good (used), Year of construction: 1993, material width 6 mm bending speed 0,25 m/s - robust, paper clip-resistant cutting unit: shreds paper, CDs, cards - simple operation: one switch each to move the belt forwards / backwards and to stop it - Main switch and safety lock switch - Operating indicator - Feed hopper with electrically secured sliding window and safety bar - Chip collection in dust-tight, large-volume plastic bag at the rear of the machine - Powerful geared motor with three-phase connection designed for continuous operation - Mains connection: 380 volt three-phase current - Working speed: 0.25 m/sec. Golhsvy Iqljcdwvebl - Cutting width 6 mm - Capacity: 110 - 120 sheets

Year of construction: 2015, Condition: good (used), max. paper size 760 x 1060 mm Golhcdjvuuvqowvobl min. Paper size 320 x 457 mm material thickness 0,2 - 0,6 mm Totalizer status approx. 1,2 million Incl. cooling device TechnoTrans Omega K250L (built in 2020) Format (portrait format) max.: 760 x 1060 mm Format (portrait format) min.: 320 x 457 mm Grammage range 0.2 - 0.6 mm Punching area (net): 740 x 1,050 mm Gripper edge: 15 mm Output format B1: 2,250 sheets/hour Output format B2: 2,750 sheets/hour

Condition: used, Resulotion 600 x 4.800 dpi print format max. 364 x 660 mm Gslhcdoumnmcjwvobl print size min. 178 x 178 mm iGen 4 XXL approx. 21 million prints, ab Lager

Condition: good (used), connected load frequency 0 V number of stapling heads 2 St. Gbjlhcdsttu Iyewvsl For normal stitching (straight)