ONI-Wärmetrafo GmbH

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical details workpiece diameter 1000 mm workpiece weight - kg workpiece height - mm Ppodpfx Ajy Idrtempjr grinding wheel motor 11 kW total power requirement 25 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 4100 x 3200 x 2600 mm Additional information Machine comes from a plant closure Equipment: Coolant system 500 liters with paper belt filter 4 grinding stones (3 of them unused) Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Grinding wheel width 80 mm

Condition: used, mileage: 195,953 km, fuel type: diesel, overall weight: 3,500 kg, first registration: 04/2024, For information Podpey Idrmsfx Ampepr

Condition: used, mileage: 201,641 km, power: 84 kW (114.21 HP), fuel type: diesel, overall weight: 3,300 kg, maximum load weight: 1,087 kg, first registration: 03/2023, emission class: euro6, For information Podpfsy Idrgox Ampspr

Condition: used, mileage: 256,182 km, fuel type: diesel, first registration: 11/2018, emission class: euro6, For information Psdpfxey Idrae Ampopr

Condition: used, power: 100 kW (135.96 HP), fuel type: diesel, overall weight: 3,500 kg, maximum load weight: 600 kg, first registration: 05/2025, emission class: euro6, number of seats: 7, Equipment: cruise control, KM0 For information Ppjdpfx Amjy Idq Nsper

Condition: good (used), FS 532 Ppjdpjy Idq Asfx Ampor IQ 501 LU 202 XL Banner Fiery Controller

Condition: excellent (used), mileage: 64,050 km, power: 338 kW (459.55 HP), first registration: 08/2019, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel, Year of construction: 2019, Equipment: ABS, AdBlue, air conditioning, cruise control, electric window regulation, power mirror, = Additional Options and Equipment = - Adaptive cruise control - Power brake booster - Air conditioning - Air-suspended seats - Radio/CD player - Beacon light - Sun visor - Xenon lighting - PTO (power take-off) = Notes = 6x4 Euro 6 Leaf suspension Automatic 64,050 km I.C.M 2-axle mixer trailer Pjdpfjy Idqvox Ampjpr Schwing Stetter Auxiliary engine 12 m³ BPW axles Belgian registration In very good condition! Immediately ready for use = Further Information = General information Suitable material: Concrete Axle configuration Suspension: Leaf suspension Front axle: Steered Weights Unladen weight: 9,786 kg Payload: 16,214 kg Gross vehicle weight: 26,000 kg Functionality Superstructure brand: ZF Maintenance, history, and condition APK (Roadworthiness inspection): Valid until 08/2026 Technical condition: very good Optical condition: very good

Condition: excellent (used), mileage: 219,409 km, power: 480 kW (652.62 HP), first registration: 06/2014, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: retarder, color: yellow, gearing type: mechanical, emission class: euro5, loading space length: 10,300 mm, loading space width: 2,550 mm, loading space height: 3,800 mm, Year of construction: 2014, operating hours: 10,929 h, Equipment: AdBlue, air conditioning, differential lock, electric window regulation, fog lights, retarder, trailer coupling,

Condition: used, functionality: fully functional, Comec FGS-1T Carousel Milling Machine Number of units: 1 Unit configuration: milling unit Pneumatic central material clamping Ppodpsy Idqcefx Ampor Motor power: 11 kW Rotational speed adjustable via variator

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 10 h, control type: CNC control, We are offering a near-new ERBEND D-SFA 4230 CNC folding machine on behalf of one of our customers. This machine has less than 10 operating hours and is in absolute mint condition. A unique opportunity to acquire a high-end CNC folding machine without long lead times. Technical Specifications: This servo-driven folding machine is built for precision, speed, and flexibility: Working length: 4200 mm Capacity steel (S235): 3 mm Capacity stainless steel: 2 mm Capacity aluminium: 4 mm Machine dimensions: 2200 x 6100 x 2300 mm Machine weight: 11,800 kg Positioning accuracy: ± 0.1 mm Thanks to the servo drives and ball screw system, the machine guarantees high precision and reliability. Configuration & Equipment This machine is fully equipped and ready for immediate production: CNC control (Erfold 3D) with full 2D/3D programming and simulation Double bending system (upward and downward bending for higher productivity) U-type back gauge (4200 mm) with pneumatic fingers Integrated suction cups for stable sheet positioning Ppsdpoy Idp Esfx Ampsr Complete segmented tooling set (top & bottom) 200 mm high upper tooling with pneumatic clamping Motorized CNC axis adjustments (A-B-D axes) Manual crowning system for optimal bending results Foot pedal with 3 functions + safety light guards Additionally equipped with motorized clamping beam and folding beam, ensuring fast and accurate processing Condition Less than 10 operating hours Fully operational and available for inspection under power No wear – in like-new condition Available immediately Applications / Industries This folding machine is ideal for: Sheet metal fabrication companies Roofing and façade cladding HVAC production Machinery and construction industry Interior and custom metalwork Both single-piece production and serial manufacturing The double bending capability combined with 3D CNC control makes it highly suitable for complex parts as well as efficient batch production. Why this machine? Like-new condition at a significant cost advantage No delivery time Fully equipped and production-ready Large working length (4200 mm) Proven ERBEND quality Interested or want to schedule a viewing? Contact us for more information or to see the machine in operation.

Condition: used, Vertical machining center, Haas MiniMill, year 2005. Podpfey Idpxex Ampopr

Year of construction: 2004, condition: good (used), Year: 2004 Configuration: Ppjdpfx Amoy Idpropjr Semi-rotary waterless offset press with integrated finishing units, suitable for short and medium run production with high flexibility. Technical Data: • Max. web width: 340 mm • Repeat length: 150 mm (6”) up to 305 mm (12”) • Semi-rotary execution (GAP-MASTER system) Printing & Finishing Units: • 6 x Offset units • Rotary screen unit • Flexo UV varnish unit • Hot foil unit • Semi-rotary die-cutting station Drying & Systems: • 8 x UV drying units • Complete IST UV system • Technotrans ink temperature control unit • Chiller Machine Equipment: • Unwind unit • Splice table • Web guide • Slitting unit • Waste matrix rewind • Product rewind General Remarks: The machine is suitable for a wide range of applications, including high-quality labels with various finishing options such as screen printing, varnishing, and hot foil stamping. The semi-rotary concept ensures efficient production, particularly for short run jobs.

Condition: used, mileage: 498,400 km, power: 390 kW (530.25 HP), first registration: 06/2018, fuel type: diesel, empty load weight: 9,730 kg, overall weight: 26,000 kg, tire size: 385/65 R22,5 - 315/80 R22,5, axle configuration: 6x4, wheelbase: 3,400 mm, next inspection (TÜV): 07/2026, energy efficiency: C, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, AdBlue, additional headlights, cruise control, differential lock, electronic stability program (ESP), lane keeping assist, navigation system, onboard computer, parking air conditioner, parking heater, retarder, traction control, Urea tank (AdBlue) Displacement: 12,809 cc Hydraulics (PTO) without pump Distance warning system EBS Low noise emission Euro 6 C Payload: 16,270 kg Automatic climate control Gross combination weight: 68,000 kg Sun visor Pjdpfx Amoy Idn Uspspr Light bar Beacon lights 1 bed Cool box VIN: 10271963 Errors excepted.

Condition: used, mileage: 70,000 km, power: 150 kW (203.94 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,200 kg, first registration: 01/2019, next inspection (TÜV): 02/2027, loading space length: 1,450 mm, loading space height: 1,330 mm, emission class: euro6, color: white, number of seats: 5, total length: 4,904 mm, total width: 1,904 mm, total height: 2,160 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), parking heater, soot filter, ?? Sale price for business customers for the vehicle as is. €35,500 gross = €29,850 net - ?? _No additional services from us_ ?? VW Special Edition Rockton! Well-maintained VW T6 Panel Van (Kombi) Automatic 4Motion / All-Wheel Drive with differential lock and raised suspension (Seikel brand), 150 kW, double cab with 5 seats and optimal features, ideal for trades and commercial use. Sortimo workshop shelving installation (details below) Double cab (DOKA, MIXTO), 5 seats All-wheel drive (4Motion, 4M, 4x4, 4WD) with mechanical rear differential lock Raised suspension (Seikel suspension with coil springs), modified suspension and damping Underride protection for engine/transmission made of aluminum Automatic transmission, DSG dual clutch gearbox, 7-speed, with coasting function LED headlights and LED tail lights Special tow bar for Rockton with 2.5t towing capacity Auxiliary heater / additional air heater, programmable and with remote control Heated front seats, both sides Climatic air conditioning with pollen filter Driver and passenger seats, multiple adjustments: seat height, backrest, lumbar support 3 individual seats in the 1st row Artificial leather seat covers Driver assistance systems: - Rear view camera - Surround observation system (Front Assist) with city emergency braking function - ACC Adaptive Cruise Control (automatic distance control) - Cruise control with ACC and speed limiter - Fatigue detection - Hill start assist - Tire pressure monitoring - Trailer stabilization - Brake assist (HBA) - Multi-collision brake - ABS, ASR, ESP, EDS Light and Vision package - Automatic headlights - Automatic wipers Audio system Composition Media (touchscreen) - Radio (FM/AM), CD player - USB, AUX-in, SD card, Bluetooth audio - App-Connect (Android Auto and Apple CarPlay) preparation (activatable) - Hands-free mobile phone system via Bluetooth - Voice control Ppjdpsy Idn Iefx Amper Leather multifunction steering wheel Multifunction display Plus / On-board computer 4 airbags: - Front airbag - Side airbag / Curtain airbag Electronics package 2: - Electric windows - Electrically adjustable, heated, and power-folding exterior mirrors Central locking with remote control Fog lights with static cornering light Second battery with isolating relay Spare wheel carrier (without wheel) Rockton configuration Wheelbase 3000 mm Load compartment partition with window Sliding passenger door on right with tinted glazing and sliding window Rear tailgate with dark tinted, heated window and wiper system 1st row left glazing, tinted Truck registration N1 / Van Engine 2.0 Ltr. – 150 kW TDI Adjustable steering wheel Front flooring: rubber and rubber mats Non-smoker package Heat-insulating glazing Load compartment equipment: Sortimo workshop installation (similar to Aluca, Bott, Würth): storage shelf, storage compartments, 6 drawers. Extendable vice. Bulkhead partition with window. Robust wooden floor. Load securing with lashing eyes and fastening rails. Lined walls and ceiling. 3 x 12V sockets. Lighting. Electric roof vent. Load compartment dimensions: - Length bottom approx. 145 cm - Length middle approx. 152 cm - Length top approx. 120 cm - Height approx. 133 cm Service history according to leasing and VW: 09/2020 / 20,414 km: Oil change 12/2020 / 24,195 km: Longlife inspection 04/2021 / 31,485 km: Oil change 12/2021 / 35,472 km: Longlife inspection 09/2022 / 40,000 km: Inspection with Haldex clutch oil change + brake fluid 04/2023 / 44,564 km: Oil change 11/2023 / 49,721 km: Lon

Condition: excellent (used), Year of construction: 2011, KAESER ASD47 TSFC screw compressor, machine with inverter and air dryer, after service and screw stage refurbishment. Technical specifications: Output: 4.58 m3/min (4580/min); Pedpfjy Idnzjx Ampepr Motor power: 25 kW; Pressure: 11 bar Operating hours: 78,540 h Year: 2011 Net price: 22,500 Gross price: 27,675 The compressor is fully operational. We provide service. Below is a link to a video showcasing the machine in operation.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical details grinding length 600 mm grinding width 400 mm workpiece height 400 mm total power requirement 23 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 3592 x 3519 x 2203 mm Additional information Horizontal surface grinder in almost new condition Operating hours: CNC on: 1198 hours Machine on: 1117 hours Automatic operation: 509 hours Grinding operation: 228 hours Okamoto Touch Screen Control Travel X-axis: 600 mm Travel Y-axis: 22.5 – 497 mm Pedpfx Asy Idnuempspr Travel Z-axis: 400 mm Grinding wheel dimension 355 x 38 x 127 mm Speed range rpm: 1-2800 (stepless) Rapid traverse mm/min: 4000 Main drive kW: 7.5 Maximum table load in kg: 1000 Accessories: - Electro-permanent magnetic clamping plate: 400 x 600 P13 mm, height 80 mm (make Wagner) - 2 grinding wheel flanges (without grinding wheel) - Table dresser - Automatic straight dresser, spindle box mounted - Automatic compensation of the wheel dressing amount - Automatic central lubrication - Ball screw in the Y and Z axes with AC servo motor and measuring system - Coolant system with belt filter system

Condition: used, Cim Core 3036i Articulated Measuring Arm, to include Extension Arm and Damper Support, Probes with Holders, Carry Case. S/No. 3036 - 187. Please Note: No Software, PSU or Cables Included Location: This lot is located in Birmingham, UK. Ppjdpfsy Idnhox Amper

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ATLAS COPCO QAS60 60 kVA Generator, 2020 Technical specifications: Power output: 60 kVA (48 kW) Year of manufacture: 2020 Engine: PERKINS Ppjdpfey Idnbjx Ampsr Operating hours: 2,300 h Generator fully functional Net price: PLN 56,500 Gross price: PLN 69,495

Year of construction: 2009, condition: used, functionality: fully functional, machine/vehicle number: C107230, We are offering a well-maintained Emmegi PHANTOMATIC T3 A CNC machining center, ideal for processing aluminum and light alloy profiles. Ppodoy Idm Repfx Amper Machine Details: Manufacturer: Emmegi S.p.A. (Italy) Model: PHANTOMATIC T3 A Year: 2009 Serial Number: C107230 Power: 7.5 kW Voltage: 400 V / 3-phase Current: 16 A Frequency: 50 Hz Weight: 1950 kg Description: The PHANTOMATIC T3 A is a versatile CNC machining center designed for milling, drilling, tapping, and cutting operations on aluminum profiles. Known for its reliability and precision, this machine is suitable for window, door, and façade production, as well as general aluminum fabrication.2Emmegi

Condition: good (used), Year of construction: 2017, Ricoh Pro C9110 (HEIDELBERG) Year of Installation: 28/02/2017 Counter Readings: • Full Color: 6,018,662 impressions • Black & White: 3,510,065 impressions _____ Configuration • Ricoh Pro C9110 Digital Press • Feeding and stacking system • Integrated control panel • Including Plockmatic 350 finishing system _____ Technical Data • Printing Technology: Advanced laser system • Resolution: up to 1200 x 4800 dpi • Paper range: approx. 52–350 gsm • Wide media flexibility (coated/uncoated/special media) • Duplex printing • Production speed up to approx. 110 ppm _____ Finishing (Plockmatic 350) • Inline booklet production • Stitching and folding Ppsdpey Idmwsfx Ampsr • Trimming unit • Professional finishing for short- and medium-run jobs _____ Condition • Well maintained • Fully operational • Can be demonstrated upon request _____

Condition: excellent (used), Year of construction: 2013, Airpress APK-G 50/500 Compressor Machine mounted on 500L tank, serviced and equipped with air dryer. Technical specifications: Capacity: 1.9 m3/min (1900/min) Motor power: 15 KW Pressure: 10 bar Operating hours: 4427 h Year: 2013 Net price: 13,700 Gross price: 16,851 The compressor is fully functional, Psdpfey Idlyjx Ampspr service support provided. Video below

Condition: used, mileage: 876,918 km, power: 331 kW (450.03 HP), first registration: 11/2017, fuel type: diesel, tire size: 315/70R22.5, tire condition: 40 %, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 650 l, color: white, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, total length: 5,920 mm, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2017, Equipment: ABS, air conditioning, cruise control, fridge, parking heater, General Information Cab: SC Technical Information Number of cylinders: 6 Axle Configuration Tyre size: 315/70R22.5 Front axle: Tyre tread: 40%; Reduction: single reduction; Suspension: parabolic suspension Rear axle: Tyre tread: 50%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 7,223 kg Payload: 13,277 kg Gross vehicle weight: 20,500 kg Ppjdpfx Asy Idltjmper Layout Number of sleeping berths: 2 Condition Damage: none = Company Information = Heisterkamp Used Trucks BV does more than just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We handle used trucks and trailers that are ready for immediate operation. From our location in Oldenzaal, we carefully select vehicles that are dependable, meet current requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - Email: - Website:

Condition: used, Faro Focus 3D 120 Laser Scanner, In Flight Case with 3 x Batteries and Charger, SD Card and USB Stick, Safety Glasses, Power Leads, 2 x Flight Cases with 10 Reference, Spheres and 8 Mounted Base Plates, Quick Start Guide Manual. S/No. LLS061101008 Ppsdpfey Idlgsx Ampor Please Note: This lot is located in Birmingham, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 1995, functionality: fully functional, Technical details internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Additional information Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 1.2 Workpiece headstock Cross shift, max. mm 650 Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Swivel, max. degrees 15 Workpiece spindle Speeds rpm 16/22/32/ Ppodpfx Asy Idlaempor 45/63/90/ 125/18/250 Load capacity, max 1000 Spindle head (with bayonet flange) DIN 55021 size 11 Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Machine documentation

Condition: good (used), Ricoh Pro C9110 (HEIDELBERG) Year of Installation: 28/02/2017 Counter Readings: • Full Color: 6,018,662 impressions • Black & White: 3,510,065 impressions _____ Configuration • Ricoh Pro C9110 Digital Press • Feeding and stacking system • Integrated control panel • Including Plockmatic 350 finishing system _____ Technical Data • Printing Technology: Advanced laser system • Resolution: up to 1200 x 4800 dpi • Paper range: approx. 52–350 gsm • Wide media flexibility (coated/uncoated/special media) • Duplex printing • Production speed up to approx. 110 ppm _____ Finishing (Plockmatic 350) • Inline booklet production • Stitching and folding • Trimming unit • Professional finishing for short- and medium-run jobs _____ Condition • Well maintained • Fully operational • Can be demonstrated upon request _____ Ppsdpey Idk Nsfx Ampor