Fa. Jürgen Stifter

Condition: excellent (used), functionality: fully functional, Year of construction: 1993, working width: 250 mm, sheet thickness (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, table width: 250 mm, COMACA BEVELING MACHINE MODEL: VAR 250 Gjdezkg Hijpfx Af Tsbp WITH VARIABLE ANGLE Work table dimensions: 1200 x 900 mm Blade length: 250 x 250 mm Maximum cutting thickness R42/mm²: 6 mm Maximum cutting thickness R60/mm²: 4 mm USED MACHINE INTERNAL CODE: SVR 423

Condition: good (used), functionality: fully functional, Capacity: 250 x 6 mm Electric, variable angle adjustment, independently adjustable from 30 to 130 degrees Drive: Hydraulic Blade height and depth adjustable via potentiometers Table dimensions: 1200 x 900 mm Motor power: 5.5 hp Connection voltage: 380V Length: 1000 mm Width: 1200 mm Height: 1400 mm Weight: 1200 kg VAT/margin: VAT: The price shown is exclusive of VAT (VAT is deductible for businesses) Gedjzi Hi Uopfx Af Tobp Please note: The information on this page has been obtained and compiled to the best of our knowledge and belief, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we advise you to verify all relevant details.

Condition: excellent (used), functionality: fully functional, 6mm, length 220mm, adjusteble angle. With punch and radius notcher. Gsdpjzhmdcofx Af Tebp

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, cutting force: 12.5 t, sheet thickness steel (max.): 6 mm, overall weight: 2,000 kg, Equipment: CE marking, emergency stop, finger protection, foot remote control, Hydraulic notching machine Manufacturer: Boschert, Type: K30 – 120, Punching press: Trumpf Year of manufacture: 2001 Technical data Width x Depth x Height: 1.5 x 1.6 x 1.4 m Weight: 2,000 kg Table dimensions: 1600 x 1000 mm Station 1: Notching Angle range: 30 - 120 degrees (infinitely adjustable) Cutting length: 200 mm Cutting capacity: 6 mm in ST 40 steel 4 mm in stainless steel Station 2: Punching (Trumpf tool system) Punching force: 12.5 t Punching diameter: 105 mm max. Overhang: 300 mm All information is subject to change without notice. Gbjdpfx Aozcm Ncef Tjp The machine is in very good condition. A demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 1999, plate thickness 4 mm plate length 200 mm total power requirement 3 kW Gbedpsy Tif Aofx Af Tjp weight of the machine ca. 550 kg dimensions of the machine ca. 1,0 x 0,8 x 1,0 m

Condition: good (used), functionality: fully functional, Year of construction: 1991, sheet thickness steel (max.): 6 mm, power: 0.004 kW (0.01 HP), overall weight: 1,600 kg, Cutting 6 mm at 400 N/mm² Gbodpfx Aoy Rf Ubjf Tjp 4 mm at 600 N/mm² Stepless angle adjustment 30 - 120° Drive power approx. 4 kW

Condition: good (used), functionality: fully functional, Year of construction: 1998, Used notching machine from Euromac Model: 220 6 S Capacity: 220 x 220 x 6 mm Gjdpfjyu H T Ejx Af Tjbp

Condition: good (used), plate thickness 6.5 mm thickness at "Niro-steel" 5.0 mm angle adjustable from - to 30 - 140 Grad no. of strokes ca. 50 Hub/min table: 950 x 1030 mm blade length 220 x 220 mm total power requirement 4.0 kW weight 800 kg range L-W-H 1100 x 950 x 1280 mm Gbodpoyk Dhfefx Af Tsp current new price approx. 20.000 euros good condition (!!) special price on request Equipment: - electro-hydraulic notching machine - multi-function machine with 2x work stations * 1x notching, 1x unit for radius rounding * including radius punching tools - manual angle adjustment 30 - 140 degrees * 2x handwheels for angle adjustment - large / stable work table - 2x new angle stop, adjustable - automatic cutting gap adjustment - 1x freely movable foot switch - connection cable + 16A plug - cutting performance: * 6.5 mm to 60° ST * 5.0 mm to 60° VA * 4.0 mm to 30° ST * 3.0 mm to 30° VA

Condition: excellent (used), functionality: fully functional, Angle Cutter INDUMASCH 260 Gbjdpfx Afjxyl Evo Tjp

Condition: used, Year of construction: 1990, plate thickness 8 mm Gedpfxsxgn Dne Af Tebp pressure 60 t notching: width x thickness 310-310-8 mm mm weight of the machine ca. 3,5 t

Condition: new, 6.0 mm ST 40 3.0 mm VA 30 - 140 Grad blade length 200 x 200 mm table: 900 x 990 mm work height max. 940 mm Punching capacity 35.0 in 6.0 mm ST 40 Throat / punching unit 135 mm engine output 4.0 kW weight 1020 kg range L-W-H 900 x 990 x 1200 mm Godpfxexcuybj Af Tebp Characteristics : - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - hydraulic Notching machine with adjustable angle & punching station - 1 set of cutting knives - Round punch with die 12 mm - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop

Condition: used, Year of construction: 2001, plate thickness 8.0 mm ST plate thickness 5.0 mm VA table-size 1000 x 950 mm blade length 200 x 200 mm strokes per minute 60 H/min adjustable Winkel 30°-140° mm work height max. ca. 950 mm oil volume 60.0 l engine output 4.0 kW weight of the machine ca. 1200 kg range L-W-H 1000 x 1120 x 1700 mm from a maintenance workshop New price at the time ~ 21.000 euros Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - Adjustment by hand wheels (left + right knife segment) - hardened knives also for cutting stainless steel - front panel - electro-hydraulic knife clamping - Inching mode for setting the shear blades selectable (manual mode) - planed table surface, with T-slots * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - 2x blank holders - 1x free moving footswitch Godpsxab Sxefx Af Tobp - front scrap switch (collecting container) - Plexiglas finger protection in front, for better transparency - User manual (PDF) * Machinelink : ?machineno=1008-9397087

Condition: used, Year of construction: 1993, plate thickness 6.5 mm thickness at "Niro-steel" 5.0 mm angle adjustable from - to 30 - 140 Grad no. of strokes ca. 50 Hub/min table: 950 x 1030 mm blade length 220 x 220 mm total power requirement 4.0 kW weight 800 kg range L-W-H 1100 x 950 x 1280 mm current new price approx. 25.000 euros good condition (!!) special price on request Equipment: - electro-hydraulic notching machine - multi-function machine with 2x work stations * 1x notching, 1x unit for radius rounding * including radius punching tools - manual angle adjustment 30 - 140 degrees * 2x handwheels for angle adjustment - large / stable work table - 2x new angle stop, adjustable - automatic cutting gap adjustment - 1x freely movable foot switch - connection cable + 16A plug - cutting performance: * 6.5 mm to 60° ST * 5.0 mm to 60° VA * 4.0 mm to 30° ST Gsdpfx Ajxab Sref Tebp * 3.0 mm to 30° VA

Condition: used, Year of construction: 1996, plate thickness 6.0 mm ST thickness at "Niro-steel" 4.0 mm plate thickness 8.0 mm ALU angle adjustable from - to 30 - 140 Grad table: 950 x 890 mm blade length 220 x 220 mm stroke 35 H/min work height max. 1150 mm Gbedpoxabx Ejfx Af Tep total power requirement 3.0 kW weight 800 kg range L-W-H 1200 x 1200 x 1400 mm New price approx. 20.000 euros Special price on request - in checked condition - machine video - ?v=QmUbaV41BfA Equipment: - electro-hydraulic notching machine * ??with adjustable angle 30° – 140° - cutting capacity up to 6.0 mm sheet thickness (R42/mm2) - made of the special spheroidal cast iron GS500. - the cutting movement takes place from top to bottom - robust work table made of steel with conical grooves * which ensure optimal adhesion of the stop angles - the scales are embossed - automatic cutting gap adjustment (patented) - system for the automatic adjustment of the gap * between the upper and lower knives * for simultaneous cutting of different thicknesses - 2x angle-adjustable locking stops - finger protection made of plexiglass - 1x freely movable foot switch - waste chute, side - load hook for easy transport - operating instructions (PDF)

Condition: good (used), Year of construction: 2009, Technical data can be seen on the data plate! Gbedpfx Afjwqmrho Top

Condition: used, functionality: fully functional, EUROMAC MULTI 220/6R NOTCHING MACHINE Maximum cutting length 220 mm Maximum sheet thickness 6 mm Variable cutting angle 30 - 120 WITH PUNCHING MACHINE Godpfx Afewqdfxo Tsbp EUROMAC Multi 220/6R 2-station notching and bending machine Press brake, press brake, cutting machine Cutting capacity steel from 6 mm to 45 kg/mm2 Becu Akmemck Ryo Iswn 4 mm for stainless steel Station I (notching) Notching angle from 60° to 140° (with special knives from 30° to 140°) Knife length 220 mm Table dimensions 950 x 640 - manual angle adjustment by handwheels - Notching angle with built-in knife set from 60° to 140° - hydraulic knife locking upper and lower - automatic cutting gap adjustment - Blank holder - Measuring tapes built into the table - Stop guides with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 tons Table dimensions 950 x 340 Working height 1100 mm - Regular lifting speed - Continuously adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4 prisms 90°, length = 415 mm - Upper tool 90°, length = 415 mm Motor power 4kW Mains connection 400 volts, 50 Hz OVERALL DIMENSIONS 115X100X125 WEIGHT: 900 KG

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 17100 € 328.32 € 200 mm 4 - 6 mm 2 - 3 mm 30 1/min 30 - 140 ° 4 kW 900 mm 1150 mm Godpfjwiq Tgex Af Tsbp 1240 mm 1150 kg Hydraulic drive Variable cutting angle 30 - 140° Max. thickness (420 N/mm²) : 6 mm (at 60°), 4 mm (at 140°) Max. thickness (600 N/mm²) : 3 mm (at 60°), 3 mm (at 140°) Automatic adjustment of blade gap 4 downholder 2 gauges angle adjustable Protection cover, acrylic glass Foot pedal Waste box According to "CE" regulations User manual in English or German

Condition: used, Year of construction: 1990, cutting angle 90 ° cutting length 150 x 150 mm work height max. 900 mm table: 1000 x 650 mm engine output 3,0 kW Gbjdjwgi Nhopfx Af Tjp weight 900 kg

Condition: used, Year of construction: 1996, machine/vehicle number: 206988, Order No. 24554 Technical Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - Continuous cutting angle adjustment from 30 to 135° - Stroke rate 60 rpm - Table support surface with T-slots 800 x 1000 mm Gbsdpfx Aov Uytzof Top - Depth stops with measuring scale and angle adjustment - Table height 860 mm - Drive 400 V / 2.2 kW - Electric - Foot switch - Space required approx. W 1000 x H 1650 x D 1700 mm - Weight approx. 1100 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 4 kW (5.44 HP), overall weight: 1,200 kg, cutting length (max.): 200 mm, Selling our notching machine FIM Versa 206 Gbjdsvld Hyspfx Af Tep Machine can be tested under power at any time. TECHNICAL DATA ; Capacity: 200 x 200 x 6 mm steel ; Table dimensions: 1000 x 750 mm ; Blade length: 200 mm ; Angle adjustment: 30 - 60° / 60 - 135° Power: 4KW Total weight: approx. 1200kg

Condition: used, Year of construction: 1993, Max. sheet thickness: 6 mm steel Adjustable angle 30-120 degrees Blade length: 200 mm Gbjdpfx Asu Eh Rgef Top Digital angle displays right and left Weight: approx. 1,200 kg Good condition

Condition: used, Max. sheet thickness: 6 mm steel Adjustable angle 30-120 degrees Blade length: 200 mm knife sharpened Godpfot D R Nnjx Af Tebp Weight: approx. 1,200 kg

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Gbodpfxsrzfh Ho Af Tjp Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Year of construction: 1981, condition: used, plate thickness 4 mm blade length 250 mm Godpsp U Utfsfx Af Tobp angle adjustable from - to fest 90 Grad table surface area 900 x 800 mm total power requirement kW weight of the machine ca. 0,65 t dimensions 1,2 x 0,9 x 1,1 m Hydraulic notching machine - Footswitch - 2 pcs. sheet metal stop

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Godsmck Ryjpfx Af Tsbp Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition