Used Compressors (construction sites) for sale (418)

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 1999, operating hours: 1,746 h, Compressor Compair DS 30 DLT 0404, year of manufacture 1999, 1746 operating hours, volume flow 3 m³, 2 cylinder Deutz, Ser.No.WCA1C0910X1411226, tool oiler without function, ABE available Cgjln Tlsuv Etgekuet

Condition: ready for operation (used), Functionality: fully functional, Atlas Copco FD 118 – Technical specifications (indicative) Cgeljv Duzfjn Tlkust Type of device: Compressed air refrigeration dryer Air flow: Approx. 118 l/s (m3/min depending on version) Working pressure range: Usually up to 16 bar Dew point temperature: +3°C Power supply: 400V / 50Hz (other variants may be available) Refrigerant: R410A or R407C (depending on year) Nominal power: Approx. 1-2 kW Weight: Approx. 100-150 kg

Condition: good (used), Fuchs Terex MHL430 machine for sale. The machine is from 2002. Cgoln Tlkspq R Sxouot Liebherr 924 Litronic machine for sale. The equipment is from 2007

Condition: excellent (used), overall weight: 1,000 kg, Year of construction: 2011, operating pressure: 7 bar, volume flow: 4.3 m³/h, ATLAS COPCO XAS 77 combustion compressor Efficiency 4.30 m3/min Pressure 7 bar Csln Tlsuphz Sskusgt Year of production 2011 Deutz engine Compressor after service, ready to work.

Condition: used, color: yellow, Year of construction: 2017, operating hours: 120 h, 120 hours of work Compressone pressure 7 BAR pumping Lt 2,000 screw made Service done new with invoice Perfect complete with all accessories and mounted on cart. Csln Tljt Agu Djkujgt

Condition: used, AIrend in good condition. Cgslnsvq Nn He Tlkuot

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2003, operating hours: 2,528 h, Compressor Kaeser M 56, year of construction 2003, 2528 operating hours, cyclone separator, with additional cooler for air, volume flow 5.6 m³, 4 cylinder Deutz, Ser.No.TP1229014603 Cgelneun Rlds Tlkust

Condition: good (used), overall weight: 5,600 kg, fuel type: diesel, color: original, Year of construction: 2007, machine/vehicle number: YA3-062658-70614985, PROD. ATLASCOPCO TYPE XAMS406 CD S/N YA3-062658-70614985 YEAR 2007 CAPACITY (kW) 186 OUTPUT (m3/min) 24.5 CIS (bar) 8.6 INVERTER no BUILT-IN DRYER no EXCHANGER no COOLED (AIR/WATER) air Cgjln Tlovrfkyokuet ON TANK no DOCUMENTS no NEW/USED USED

Condition: good (used), ATLAS COPCO Compressor GA11P Cslnotpbu To Tlkujgt

Condition: excellent (used), Year of construction: 2005, INGERSOLL RAND diesel compressor Capacity 3,10 m3/min Pressure 8,6 bar Coln Tovhfq Eolkusgt Year of production 2005 Compressor after service, ready to work.

Condition: excellent (used), Functionality: fully functional, overall weight: 9,550 kg, fuel type: electric, Year of construction: 2018, machine/vehicle number: V9230, Equipment: type plate available, Centrifugal compressor, fixed rotary turbo type with a control range of 2300 - 6000 Nm3/h. Year of production: 2018 Technical condition of the compressor excellent, documentation complete. It is possible to buy transport and installation. Compressor to be seen in Bielsko-Biała. TECHNICAL DATA 1) Oil-free, three-stage. 2) Water-cooled. 3) Capacity control by IGV valve and bleeder valve. 4) Regulation in the range of about 2300 - 6000 Nm3/h. 5) Microprocessor controller Xe 145F with ambient control function performing measurement, control and control functions: (a) motor current measurement, b) motor hour counter, c) measurement of temperature and air pressure after each compressor stage and in the exhaust manifold (network), d) measurement of air pressure drop on compressor suction filters, e) measurement of temperature and pressure of oil in the compressor, Csljvi H E Hsn Tlkujgt f) measurement of the temperature of the stator windings of the 6 kV motor, g) measurement of the temperature of the bearings of the 6 kV motor, h) measurement of vibration of rotating assemblies of individual compressor stages, i) automatic operation of the circulating water valve, j) automatic operation of the auxiliary oil pump, k) automatic operation of the compressor in the mode of constant pressure, automatic unloading and compressor operation on the slack. (l) signaling of compressor cooling water flow failure, m) optical and acoustic signaling in the compressor room control room of emergency conditions. 6) Noise suppressor for the bleed valve. 7) Two-stage inlet filter. 8) PNLD lossless condensate drains. 9) Asynchronous squirrel-cage motor with parameters: (a) rated power: 700 kW, (b) degree of protection: IP23, c) supply voltage: 6kV, 50Hz, d) starting: direct, (e) cooling type: air, f) flanged, roller bearings Required: - Water cooling system - Foundation.

Condition: good (used), Functionality: fully functional, Year of construction: 2023, operating hours: 154 h, Technical data: Air flow at pressure: 7 bar - 21.2 m³/min; 8.6 - 19.7 m³/min; 10.3 - 18 m³/min Maximum pressure: 12 bar Caterpillar diesel engine with 146 kW output Tank capacity: 420L Fuel consumption at full load (L/h): 36,3L Cgjlsumv D Nen Tlkuot Connections: 2x G2 and 1x G3/4 Additional equipment: AFTERCOOLER - an additional cooler for after-cooling the compressed air CYCLONE SEPARATOR - for separating condensate from the compressed air after cooling It is powered by a 6-cylinder Caterpillar engine with 146 kW. The M210 delivers an impressive 18 m³/min of compressed air at 10 bar. Even with a full fuel tank, the standard version weighs 3.7 tons, which makes it easier to transport as it is mounted on a two-axle chassis. Operating hours: 154 h CoC certificate for rapid approval: not available Warranty: 1 year (valid for Serbia, Croatia, Bosnia and Herzegovina, Montenegro, North Macedonia and Kosovo). Functional and in perfect condition!

Condition: good (used), Functionality: fully functional, Year of construction: 2011, operating hours: 1,245 h, Compressor Atlas Copco XAS 97 DDG, year of manufacture 2011, 1245 operating hours, volume flow 5.3 m³, aftercooler, water separator, emergency power 12.5 Kva, connections 1 x 230 Volt, 2 x 400 Volt, serial no. APP196893, ABE and approval available Celn Tot Sdc Rjlkuogt

Condition: good (used), overall weight: 5,100 kg, fuel type: diesel, fuel: diesel, Year of construction: 2005, PROD - ATLASCOPCO TYPE - XAS426 S/N - YA3-062854-50542371 Colnet Srw Aj Tlkuogt YEAR - 2005 POWER (kW) - 166 PUMP. (m3/min) - 25 CIS (bar) - 7

Condition: used, Year of construction: 1995, CompAir compressor IDC000083 - year of production: 1995 - manufacturer: CompAir - model: 6075N08A - max pressure: 8 bar - m3.min: 9 Celn Tlket Ec U Esuogt

Condition: good (used), overall weight: 8,500 kg, total length: 3,990 mm, total width: 2,280 mm, total height: 2,500 mm, Year of construction: 2013, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Celn Tlertrx Rokuegt Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: ready for operation (used), Year of construction: 2011, operating hours: 1,264 h, Compressor Atlas Copco XAS 67 DDG, year of manufacture 2011, 1264 operating hours, volume flow 3.5 m³, emergency power 12.5 Kva, connections 1 x 230 Volt, 2 x 400 Volt, Ser.Nr.YA3062564B0166229, air filter diesel filter oil filter oil has been renewed, ABE and approval available Coln Tlkjqagx Souogt

Year of construction: 2010, Condition: excellent (used), 306- Compressor Compair C 38, year 2010, operating hours 144, ser.no. WCA1C2807A1A40135, volume flow: 3,8 m³, ABE and KFZ-Brief available, TÜV 12.2022, car and truck towing device, 4 cylinders Cummins Diesel, operating pressure adjustable 7-10 Bar Celoibhwyen Tlkusgt