Concrete Block Production Machine

ZİM Mühendislik ZIM 518 READY IN STOCK

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Ncsdpfx Aetvau Aekgew Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the aluminium profiles you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø700 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture Ncsdpfx Akomb U Tujgew • Fabricated aluminium structures manufacture • Aluminium facades manufacture

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 1590, Equipment: cabin, hydraulics, Zenith Machinenfabrik GMBH Neunkirchen/Siegerland GERMANY Used for production of concrete vibropressed pavement and borders. The machine is fully functional and it comes togheter with 2 mixers, bunkers for aggregates, skippers, packaging machine and 150 pallets for production. Ncedpfx Ajucruuokgow It also has included molds for different pavement models. We also have to sale a Mobil Zenith 941 II A from 1978 which also has the identification plate attached. The machine is beeing sold because it was replaced with newer techonology.

Condition: good (used), Consisting of : - 3 tanks of 18000 litres - 3 tanks of 15300 litres - With walkways - Material: AISI 316 - Square discharge door (bottom) Ncsdpfxjib H Dds Akgjw - Motorised mash discharge - Round manhole DN 400 (cylindrical part) - Total emptying: ball valve Ø 40 Friedrich no 2 - Partial drain: ball valve Ø 40 Friedrich no 2 - Taster - Recirculation with ball valve Ø 40 Friedrich no 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, with a cylinder-grid fixed inside (to keep the mash cake wet) Dimensions : - 3 tanks 18000 litres: Ø 2000 mm, height 5600 mm - 3 tanks 15300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm

Year of construction: 2019, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: MISCO1082, Oil Mist Collecting and Regaining. MISCO is used for collecting and getting rid off the oil in the CNC machines cabin. It is a water vapor, aerosol, smoke, oil mist filtering / separating device. Also allows condensing and recycling the condensed liqud back to the sump The particulate-smoke-gas-water in the air sucked in is filtered through the vapor separation units. The saturated oil-water etc. contained in the air is also separated and recovered, and the air is cleaned by 98% of the dry air. Removal of parts washing machines vapor-mist, Welding fumes, Oily air off CNC machines In the industry and even In the industrial kitchens a lot of oil mist, various gases, fumes and dusts are mixed into the air and create a risk of fire. In addition, they are inhaled by workers and cause damage especially to the lungs, respiratory tracts and other vital organs. For this reason, harmful substances such as gas, dust, smoke and similar substances must be cleaned by absorbing harmful substances in terms of safety and health. Application Areas: CNC Machines Welding fumes, Allows removal of oil vapor and recovery of existing fluid in CNC machines Automotive - Metal Processing – Food Industry - Industrial Kitchens - Steel - Casting - Chemical Industries etc. Working Principle; 1-Entry of dirty smoke –vapor- mist 2- Condensation with laminar flow over the walls 3- Disintegration of the particles passing through the filter 4-Recycling of condensing liquid Ncedod Nwk Ujpfx Akgjw 5-Dry and clean air evacuation For detailed information please contact us. mistcollector, cnc cutting oil, fume removal, cutting oil fume collector

Condition: used, No. 10019 Various conveyor belts Used Consisting of 6 positions Pos. 1: Blue conveyor belt, approx. 8000 x 800 mm LW, was used for waste Pos. 2: Orange conveyor belt, approx. 12000 x 1200 mm LW, as good as new Pos. 4: Two blue mobile conveyor belts, each approx. 10000 x 800 mm LW Pos. 5: Two turquoise conveyor belts, 1st belt approx. 10000 x 1600 mm LW, 2nd belt approx. 4500 x 1400 mm LW, very solid - with sheet metal floor, new motor and gearbox required Pos. 6: Blue Westeria conveyor belt, approx. 14000 x 1200 mm LW Pos. 8: Green mobile Z conveyor belt, approx. 7000 x 500 mm LW, new belt, as good as new Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Ncjdpfxewhp H No Akgjw Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2012, Overview  This brewhouse and utilities package was manufactured between 2001 and 2023 by European manufacturers including Slowbeer, GG-Technik, Lavor, Sommer, Quantor and others. The package centers around a 500 L brewhouse and includes steam generation, milling, cooling, compressed air and transfer pumps. Personal inspection is possible, Nedpfjyg R Dlox Akgscw Technical data  - Brewhouse capacity: 500 L - Configuration: 3 kettles + hot water tank + cold water tank + boiler - Steam heated - Cooling capacity: 35.8 kW Scope of Delivery  - Brewhouse | Slowbeer | MB-500MAN | 2012 | 500 L, incl. tanks & boiler - Steam Generator | GG-Technik | TD9 | 2016 | 5 kW - Steam Generator | Lavor | GV Vesuvio | 2014 | 18 kW, serviced 2025 - Malt Mill | Sommer | Piccolo 11 S | 2012 | Grain mill - Cooling Unit | Quantor | Q352RHQ | 2021 | 35.8 kW - Air Tank | Fiaseis | Coinox | 2023 | 270 L, stainless steel - Compressor | CompAir | WinVOM L15 7.5 | 2001 | — - Transfer Pump (2x) | Ebara | CDXM-B120-20 | — | Stainless steel - Air Dryer | — | E2000 | 2001 | Air drying unit

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm Weinig Unicontrol 6 window system ----- Manufacturer's description: For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transverse machining) controlled via selector switch on the control panel. Technical Specifications ----- Crosscut Saw ----- Number of Tools: 1 Spindle Speed: 2,800 rpm Spindle Diameter: 40 mm Max. Tool Diameter: 350 mm Motor: 3 kW Mortise and Slot Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 3,500 rpm Spindle Diameter: 50 mm Tool Clamping Length: 320 mm Max. Tool Diameter: 320 mm Motor: 11 kW Profile Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 6,000 rpm Spindle Diameter: 50 mm Tool clamping length 320 mm Max. tool diameter 232 mm Motor 11 kW Special equipment: Nedpfox Tu N Hjx Akgscw Synchronous spindle ----- Pneumatically timed forward/backward for tear-free rerouting of window sashes, frames, and doors. Spindle diameter 50 mm, 4 kW Tool clamping length 120 mm, zero tool diameter 112-140 mm Max. tool diameter 232 mm, spindle speed 6000 rpm Motor boost for synchronous spindle from 4 kW to 7.5 kW Screen control for 99 window types. One type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame-by-frame, series, rerouting. Data entry via keyboard with integrated operator guidance and error diagnostics. 1 Grooving spindle from above ----- Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm, with 10 x 4 mm key Clamping length: 13 mm Clamping length: 40 mm Axial stroke, 2 positions Radial stroke, 2 positions Max. tool diameter: 130 mm Grooving spindle motor boost from 2.2 to 3 kW 1 Fitting milling unit, right: ----- For milling fitting grooves in the circumferential milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the control panel. Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting radius: min. 140 mm, max. 180 mm Home position below table level: 10 mm Special design of the fittings milling machine: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial cycle, 2 positions Motor booster for the hinge milling spindle from 2.2 to 3 kW Hinge milling spindle for 230 mm tool diameters in and above the table Electric height adjustment of the feed with selector switch on the control p...

Condition: good (used), Year of construction: 1993, HENKE VARIANT 140/120, dual-feed machine, year of manufacture 1993, 2 moulds, new control system Ncodpoxl S Uhefx Akgew

Condition: ready for operation (used), Technical specifications of Dixi 60 AUTOMAT baler Filling opening (W x H): 1550 x 1000 mm Drive power: 31.5 kW Pressing force: 60 t Ncsdov Amw Nopfx Akgow Bale weight (depending on material): 350–600 kg Bale dimensions (W x H x D, adjustable): 1100 x 800 x 300–1600 mm Pressing/cycle time: 13/24 s Machine weight: 7000 kg