Coordinate measuring machine

Zeiss ECLIPSE CNC 07/07/06

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, lifting height: 3,800 mm, overall weight: 1,200 kg, load capacity: 500 kg, Hydrobull Industrial Crane with Counterweight – Lifting Capacity 500 kg Model: HYDROBULL HB 500 GK CE Condition: Good, fully operational. Description: This original Hydrobull counterweight crane features a chassis set back with rear counterweight box. Thanks to the counterweight, the crane can be positioned directly next to loads and machinery, making it ideal for a wide range of workshop applications. Technical specifications: Lifting: Manual Travel: Manual Fgedpfx Asuhhm Rod Nji Max. lifting height: approx. 3.8 m Design: Counterweight Max. lifting capacity: 500 kg Residual lifting capacity at approx. 1,000 mm outreach: 320 kg Residual lifting capacity at approx. 1,500 mm outreach: 240 kg Residual lifting capacity at approx. 2,000 mm outreach: 110 kg Contact us for further information or to arrange a viewing appointment!

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 31 h, 3D Coordinate CNC measuring device Profitech Innometrik Advanced in gantry design (demo unit at a special price) Open Cable Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Technical specifications Measurement paths: X: 500mm Y: 600mm Z: 400mm Max workpiece weight: 250kg Weight of the machine: 850kg Dimensions over everything: 1290x1160x2350mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.2μm Volumetric length measurement deviation: MPEE = 2.2+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Fodpfodyah Sjx Ad Nsgi Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 90NI / min Also configurable as a complete package with touch probe, software commissioning and training. (Annual maintenance & calibration can also be offered)

Condition: good (used), Year of construction: 2001, grinding length: 650 mm, grinding width: 525 mm, total height: 350 mm, table length: 600 mm, table width: 350 mm, Manufacturer: Geibel & Hotz Type: FS 635-Z SA Control: Digital read out Year of construction: 2001 Magnetic table 600 x 350 mm Closed housing for CE Automatic vertical lubrication SA Automatic lubrication Coolant tank Specifications Metric US Standard X - axis 650 mm Y - axis 525 mm Z - axis 350 mm Table length 600 mm Table width 350 mm Table load 400 Feed X - axis 35000 mm/min. Feed Z-axis 1000 mm/min. Grinding stone dimensions 300 x 50 x 76.2 mm Fedpjvdal Aefx Ad Nsgi Power output 3.7 kW Speed 2800 ? rpm Dimensions (estimate) length 3200 mm width 2000 mm height 2870 mm weight 2300 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: excellent (used), Year of construction: 2011, operating hours: 1,300 h, functionality: fully functional, machine/vehicle number: 201108502924, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, year of last overhaul: 2025, Equipment: type plate available, CNC Coordinate Measuring Machine ZEISS CONTURA G2 7/10/6 VAST XXT RDS-CAA Serial number: (201108502924) Fgodswlhv Dopfx Ad Nji Measuring range: X = 700 mm, Y = 1000 mm, Z = 600 mm Machine in very good condition, Operating time approx. 1300 operating hours X-axis distance approx. 22 km Y-axis distance approx. 18 km Z-axis distance approx. 16 km Length measurement error according to ISO 10360-2 for RDS/direct VAST XXT: MPE_E = (1.8 + L/300)µm, MPE_P = 1.8µm for RDS with RST-P/TP 20/200: MPE_E = (2.2 + L/300)µm, MPE_P = 2.0µm Scanning performance according to ISO 10360-4 for RDS/direct VAST XXT: MPE_THP = 3.5 µm in 68 s Device functions, equipment - Portal measuring device in ceramic technology with fixed equipment table - Table height approx. 850 mm - Integrated vibration damping - Scan control via computer (ISC) in external cabinet - Wiring prepared for RDS and VAST XXT/direct multi-sensor technology Sensors/accessories RDS-CAA base unit for Zeiss portal measuring machines consisting of: RDS-CAA-select joint with +/- 180° adjustment range and 2.5° increments, which gives 20,736 usable positions. The RDS-CAA select has a multi-sensor mount for touch switching, scanning and optical sensors. The following sensors are supported in CAA calibration mode: - ZEISS/Renishaw touch switching sensors (RST-P, TP2, TP6, TP20, TP200). - Zeiss VAST XXT TL3 scanning sensor and - XDT TL3 multi-point sensor (including PS calibration module with Calypso CAA license).

Condition: ready for operation (used), Year of construction: 2018, Max. measuring dimensions X/Y/Z: 600mm/300mm/200mm, repeatability: +/-3µm, display error: +/-8µm, measuring modes: program measurements/single measurements/statistical measurements. Various accessories included. Documentation available. Fjdst H Rd Rspfx Ad Negi

Condition: excellent (used), Year of construction: 2018, functionality: unexamined, Technical data: Machine type F135/F155 Measuring range Distance between C- and Z-axis 270 mm Maximum measurable diameter 320 mm Maximum measurable height 350/550 mm Maximum table load 25 kg Rotation axis (C-axis) Turntable diameter 150 mm Manual alignment of the workpiece Roundness deviation in the rotation plane. Table 0.03 µm + 0.0005 µm/mm Measured height *Roundness deviation in the plane of the rotary table 0.015 µm + 0.00025 µm/mm Measured height axial run-out error 0.04 µm + 0.0005 µm/mm Radius *axial run-out 0.02 µm + 0.00025 µm/mm Radius centering range +/- 2mm Fedpfxsuh Ufao Ad Njgi Inclination range +/- 0.6˚ Rotation speed 1-10 rpm Rotary bearing air Vertical axis (Z-axis) Effective height 350/550 mm Straightness deviation 0.15 µm/100 mm (0.3 µm/350 mm/0.4 µm/550 mm) Parallelism of the C and Z axis 0.8 µm/350 mm/1.3 µm/550 mm Anti-collision protection yes Horizontal axis (R-axis) Effective length 170 mm Dimensions Length 700 mm Width 410 mm Height 950 mm Weight approx. 185 kg

Condition: like new (used), Year of construction: 2011, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, For sale Zeiss Contura G2 Direct: - measuring head Vast XXT Fodpfx Adsw Rmxts Nsgi - probe changer - measuring software Calypso - reference sphere Possible - installation, maintenance with acceptance tests, Calypso training

Year of construction: 1989, condition: good (used), Equipment -Software: Umess 300 -Hardware: Monitor, hard disk, printer HP The machine can be modernized with new software and control system according to customer requirements. Fodobctkbepfx Ad Njgi Technical data -Touch probe: ZEISS -Touch probe change: 4 trays -resolution: 0,1 - 0,2µm -positioning speed: 0.5µm - 65 mm/s -Measuring force: 0.1 - 2N -Mass LxWxH: 2200x1200x1600 -Weight: approx. 3000 kg Measuring range -X = 500 mm -Y = 500 mm -Z = 400 mm Measurement inaccuracy -2,3µ + L/200 Price: on request! We will be happy to provide you with a detailed offer! Note: Our offer is aimed exclusively at professional customers. (Changes and errors in the technical data, specifications and and prices as well as subject to prior sale) Pictures you get in the following word file!

Condition: ready for operation (used), Year of construction: 2022, This ZEISS Metrotom 6 Scout was manufactured in 2022. A fully maintained demo CT inspection and metrology machine, it was primarily used for presentations, featuring a low X-ray on time of 789.5 hours. The ZEISS METROTOM 6 Scout digitizes complex parts, including internal geometries, with the most advanced level of detail. The result is a complete 3D image for GD&T analysis or comparisons of objective and real-world data. The CT metrology system is an excellent choice for digitizing small plastic parts. Ideal for precise measurements, it can be checked onsite. Contact us for more information. Fgodpfjxbul Isx Ad Nji Application Types Measuring

Condition: new, Year of construction: 2025, functionality: fully functional, Aberlink's Halo CNC coordinate measuring machine (CMM) combines high precision with affordable metrology. It features a bridge design and belt drive for the X, Y and Z axes, making it ideal for use in inspection departments and on the shop floor. With travels of X 800 mm, Y 1000 or 1600 mm and Z 600 mm, the Halo CMM offers flexibility for various measurement requirements. The solid granite plate ensures high load-bearing capacity and stability. Thanks to the user-friendly Aberlink 3D measuring software, the training time is minimal, so that precise measurements can be taken even without prior knowledge. The volumetric accuracy is (2.1 + L/250)µm with the TP20 probe, (2.0 + L/250)µm with the TP200 probe and (1.8 + L/250)µm with the SP25M scanner. The scale resolution is 0.1µm. The Halo CMM is a cost-effective solution for precise measurements in various industrial applications. Fgedpfx Aevwa T Hed Nji