ZACMI telescopic filler

ZACMI

Condition: good (used), Telescopic filling machine Make: Zacmi Type: automatic 60 pocket rotating telescopic filling machine Capacity: up to 36.000 cans/hour Frame: stainless steel Direction: left-right Dimensions: L x W x H = 2.600 x 2.600 x 2.000 mm Weight: 1.500 Kg Power-Supply: 380 Volt + 50 Hz – 3 kW Compressed air: 6 Bar Features: in- and out-feed slat-band conveyor diversion plates revolving brush for removing product from top telescopes product height level control with proximity sensors height adaption with electric gear motor with dust roof Tooling: 67mm set Remark: without electric cabinet / control as-is or Lhjdpfeib A Idox Afkjk adjusted to customer needs

Condition: used, Year of construction: 2016, operating hours: 1,476 h, functionality: fully functional, Hello, we are offering a Hurco VM 30 i Plus for sale here. Travel: X-axis: 1270 mm Y-axis: 510 mm Z-axis: 510 mm Control: Max5 Taper: SK-A40 Ledpfx Afoyhw Eajkjhk Max spindle speed: 12,000 rpm Transport weight: 4,550 kg If interested, please call. Sale on behalf of customer.

Condition: like new (used), SUITABLE FOR ALL TYPES OF PRODUCTS: green peas, green beans, spinach, carrots, okra, beans, strawberries, artichokes, sweet corn, broccoli, cauliflower, mushrooms, etc. WATER CONSUMPTION: 1.5 L water per 1 KG of product. STEAM CONSUMPTION: 1.5 L steam per 4-7 KG of product. The machine can operate in three modes: with water, with steam, or as a moisturizer (hydration). Hydration Blancher Version: In this configuration, the machine is suitable for completing the rapid rehydration process of cereals or legumes pre-started with the pre-heater. - Module 1 functions to treat the product with a water spray. Lodpfsx S H U Ssx Afkehk - Modules 2, 4, and 6 work with steam. The temperature is controlled by a probe located in module 6, which regulates the modulating valve on the steam supply line to module 6, provided the pneumatic steam shut-off valve on module 2 is open. - Modules 3 and 5 use cold atomized water. - Module 7 is designed as a water-to-air cooler. - Module 8 works with water, and its temperature does not exceed 14ºC to lower the temperature of the product. Water Blancher Version: In this configuration, the machine operates in counter-current, meaning the product moves in the opposite direction to the cooling water flow. The first seven modules are equipped with trays with rotary water recovery filters, as well as associated level controls and water recirculation pumps. - Modules 1, 2, and 3 function as pre-blanchers for the product. - Modules 4 and 5 are specifically designed for blanching with hot water. Water is recirculated by pumps, and temperature is regulated in module 4. - Module 6 acts as the first cooling module and is fitted with a by-pass pump for recirculating warm water, which is redirected to the 2nd or 3rd module; supply to the 3rd module is regulated by a solenoid valve. - Module 7 cools the product using a water mist and removes humid air with a fan. - Finally, module 8 further cools the product by spraying water above and below the conveyor net, with all water collected in module 8’s recovery tank. Steam Blancher Version: In this variant, the machine can steam-blanch vegetables across eight modules: - Module 1 serves as a barrier to prevent steam loss. - Modules 2, 3, 4, 5, and 6 operate on steam. The temperature is maintained by a probe in module 6, controlling the modulating valve on the steam supply line, provided the pneumatic steam shut-off valves are open. - Module 7 is designed for WATER-AIR cooling. - Module 8 is water-cooled, with the temperature not exceeding 14ºC to rapidly reduce the product temperature.

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ----- Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) Lhodpfx Afsxpn T Uekjk ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically timed up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: pneumatically timed up-down glazing bead saw Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Can be used for glazing bead cutting or as a grooving machine > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with 99-program memory > Machine operation: Window package Joint control of the right spindle and the glazing bead feed via manual selector switch on the control panel > Spindles with mechanical digital display (Technical data according to the manufacturer - no guarantee!)

Condition: excellent (used), Year of construction: 2012, - 3-axis CNC center SCM Pratix S - model PRATIX 12B from 2012. - Range X, Y, Z axes: 2500x1250x150+ mm - Number of tool spaces in the magazine: 8 - Machine table: Raster aluminum table, 2 sections. - Control: PC control - Software: SCM NESTING, SCM XILOG MAESTRO - Serial no.: AH/115920 Number of milling axes: 1 Drilling unit: 1 - practically unused Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Main engine: 6.6 kW Table measurements: 130 cm x 260 cm Portal construction: Machine with movable portal Vacuum pumps: 2 pcs. BECKER from 2012 - one placed outside, the other installed in the machine. Vacuum pump capacity m³/h: 240/280 m³/h. Interface for reading CAD format (.dxf) Security: Rejects Weight approx. 2,500 kg Length: 5,900 mm Width: 2,790 mm Height: 2,190 mm Automatic tool length measurement Ledpfxjuu Ntgj Afkjhk

Condition: refurbished (used), machine/vehicle number: 4507, Rectificadora sin centros ESTARTA 327 CNC Lsdog Ix Hmepfx Afkohk

Year of construction: 1980, condition: good (used), A used, very well-maintained cycle-controlled lathe from Weisser Heilbronn with a SIEMENS control system. Distance between centers 2000 mm Center height 295 mm Swinging diameter over bed 600 mm Swinging diameter over cross slide 260 mm Swinging diameter in the crotch 800 mm Total length of the crotch 375 mm Bed width 450 mm Travel of X-axis 350 mm Travel of Z-axis 1850 mm Spindle nose DIN 55022, size 8 Spindle speed, number 18, 14 – 1400 rpm Spindle bore 71.5 mm Diameter of front bearing 110 mm Feed range 0.01 – 40.95 mm/rev Rapid traverse 8 m/min DC drive 15 kW 400V 50Hz Max. permissible torque on the spindle 2500 Nm Tailstock quill 80 mm Quill stroke 250 mm Internal taper in quill MK 5 Lodpfxegyy I Ae Afkshk Length x width x height Machine weight 5500 kg Accessories: Tailstock Pneumatic three-jaw chuck with replaceable jaws, 315 mm Quick-change tool holder "MULTIFIX" in front of the center, size "C" Four-position turret behind the center Tool holder Coolant system Follow rest, pneumatically actuated Technical data and dimensions: Subject to change without notice. Video conference via WhatsApp possible after scheduling an appointment.

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm Lsdpfxsp Audqj Afkjhk DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,443 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 271 mm, travel distance Z-axis: 830 mm, spindle motor power: 17,000 W, total height: 1,950 mm, total width: 3,260 mm, overall weight: 6,300 kg, controller manufacturer: FANUC, product length (max.): 2,440 mm, number of axes: 3, This 3-axis DMG MORI CLX450 was manufactured in 2019. It features a 12-station tool turret and an integrated sub-spindle for enhanced productivity. The machine is equipped with a 3-jaw chuck on the main spindle. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX450 horizontal turning machine we have for sale. Contact us for further details. • V3 Version (No counter spindle, no y axis) • no bar loader • features a main spindle motor power of 25.5 kW (at 40% DC) or 17 kW (at 100% DC) Lsdpfjyu Sc Eex Afkehk Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Lhedpeu Idbyofx Afkok Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination *