CNC Coordinate Measuring Machine

Wenzel LH 65

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: LH-M064774, measuring range X-axis: 650 mm, measuring range Y-axis: 750 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 270 kg, Offered for sale due to upgrade (we require a larger model): Wenzel LH65 3D Coordinate Measuring Machine with accessories New metrology software system Quartis R2022-2 Used but in very good condition Fixed price: EUR 22,500 net, ex-works 95369 Untersteinach, collection only Itjdpfsyxv Eajx Aa Ioh Payment required before or upon collection Machine will remain in operation until early April 2026 and demonstrations are possible until then Technical data: - Model: LH 65/CNC - Year of manufacture: 2005 - First commissioning: 04/2006 - Serial number: LH-M064774 - Weight: 1,270 kg - Permissible workpiece weight: 500 kg - Regular maintenance and calibration carried out - Unit operated/located in a climate-controlled measuring room - Monthly usage: approx. 1 week Measurement range and accuracy: - Measuring range (X/Y/Z): 650x750x500 mm - Usable table area: 1450x850 mm - Measurement uncertainty according to DIN EN ISO 10360-2 for TP200 probing system - Measuring accuracy (MPE E): 2.6/1000 + (L/300) - Temperature range: 20°C +/- 2K, 1.0K/h, 1.0K/m - Operating temperature: 15°C to 30°C - Relative humidity: 10% - 70% - Supply pressure: 6-10 bar, pre-filtered, quality as per ISO 8573-1, Class 4 or better Equipment: - CNC control - Renishaw probing system - Base plate made of natural hard stone with minor repairs (see photo) - Horizontal air bearing system LH on measuring table - Active pneumatic damping (instead of elastomer vibration dampers) - PC system & software: - Upgraded to WM Quartis R2022-2 (new price: EUR 23,740.50) - 4-channel PCIe interface card - USB keyboard, black, German layout - One LED monitor full HD (1080p) – 61 cm, 24” - Front panel PC Si-Esprimo P757 Accessories: - Reference ball, diameter 25 mm, ceramic, with M10 mounting - Small stylus kit M2 - PH10T motorized indexing probe head - PHC 10-3 Plus control unit for indexing head - 1x TP200 - 1x SF module - 1x SCR 200 - Various M2 styli (one piece each diameter 0.5mm, 1.0mm, 2.0mm, 4.0mm) - M2 rotating swivel joint - M2 stylus holder, length 19 mm - 1 hex wrench and 2 pin wrenches - Stylus holder in case - PC and controller cart with integrated desk - HAT-400 hand control panel - Documentation All information provided to the best of our knowledge and belief. Subject to change, errors, and prior sale. Sale without warranty.

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 15,996 h, input voltage: 400 V, overall weight: 6,750 kg, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system Itsdetwliwopfx Aa Ieh with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 054344, Equipment: type plate available, Wenzel LH 65 Machine data: MBX 650-MBY 1000-MBZ 500 Serial number 054344 Year of manufacture: 2005 Controller: WPC 2030 Probe system: Renishaw Exchange bridge: Renishaw Software: Metrosoft CM 3.111 Software: Quartis R10 Probe head: PH 10M PHC: PHC 10 Probe: 2x SM25-1 Probe: 1x SM25-2 Itodpfx Aasxr Av Ne Ieh Probe: 1x TM25 (adapter) DAkkS calibration certificate dated 05.09.2025 The coordinate measuring machine is fully functional and in excellent condition.

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Year of construction: 2025 Condition: Showroom Specifications: - X-axis: 4000 mm - Y-axis: 1000 mm - Z-axis: 1000 mm - 26 kW (S6) main motor - 8000 rpm - BT-40 - Automatic tool changer (24 positions) - Remote service (IXON) + network connection - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available Isdpfxjw Ty S Se Aa Ieth

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Itsdpfsv N Di Aox Aa Ioh Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Year of construction: 2023, condition: new, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. Guillotine RAPIDO is fast reliable shearing machine. Depends on sheets length there are guillotines with different working lengths available: 1300 mm / 2600 mm / 3200 mm / 4100 mm. Machine can do up to 35 cuts per minute. The drive system with eccentrics, pulldown rods, and hold down system which can be positioned as close as 2.5 cm from the knives allow for easy and expedient trimming of narrow strips. RAPIDO guillotine shear is equipped with squaring arms on both sides and the LED cutting line light. Itjdpfeixz D Uex Aa Ish Available working lengths: 2600 mm / 3200 mm / 4100 mm

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool Ijdpfjh Hvk Aox Aa Isth - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Condition: ready for operation (used), Year of construction: 1998, power: 37 kW (50.31 HP), pressing force: 250 t, stroke length: 150 mm, table width: 900 mm, table length: 1,000 mm, overall weight: 16,000 kg, Very nice and well maintained hydraulic press. 250 tons pressing force. Approximate dimensions: H: 380 cm. W: 200 cm. L: 200 cm. Isdpfx Aaory Trpj Ioth Weight: 16,000 kg. Can be loaded by crane on collection against payment. Transportation can be arranged. Sold for customers. Location: DK-7600 Struer. Make an appointment for a demonstration.

Condition: good (used), Year of construction: 2006, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 813 mm, overall weight: 13,611 kg, table length: 1,626 mm, table width: 914 mm, controller model: HAAS, nominal power (apparent): 22 kVA, rotary table diameter: 760 mm, spindle speed (max.): 6,000 rpm, table load: 4,536 kg, Equipment: chip conveyor, IBN 03/2006 IKZ 70 bar (TSC 1000) WZW 30-fold (BT50) Full 4th axis Spindle & gearbox new in 2017 1-shift operation Machine can be inspected under power !!!! free loading until CW04/2025 !!!! Iodovgmr Ijpfx Aa Isth (with same-day delivery of our new machine)

Condition: used, Year of construction: 2000, table length 1160 mm table width 710 mm daylight 650 mm Iodpet Hw S Iofx Aa Ioth Control WENZEL ME 5007 total power requirement kW weight of the machine ca. 800 kg dimensions of the machine ca. m 3-D-coordinate measuring machine with METROLOG II-Software