Telescopic handler

Weidemann Teleskopradlader T 4512

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 470 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, construction height: 1,920 mm, empty load weight: 4,800 kg, drive type: Diesel, construction width: 1,810 mm, Telescopic forklift rigid Load center of gravity: 500 Technical condition: very good Front tires type: pneumatic Lhjdpfov Ntfyjx Apmji Front tires size: 12-16.5 Front tires condition: 80 - 100% Rear tires type: pneumatic Rear tires size: 12-16.5 Rear tires condition: 80 - 100% Battery voltage: 12V Image serves as a symbol - Fork carrier - Interior rear view mirror - Radio antenna - Radio preparation - Info additional hydraulic function - JSM tilt function switch-off - Sun visor front roof window - Rear view mirror at the rear of the machine - Roof window wiper - Power cable 95mm - Engine heating - Diesel preheater - EU version - Easy Link STD module 3rd valve, rear work light, front work light, soot filter, full cabin, CE certificate,

Condition: used, Year of construction: 2018,

Condition: new, Year of construction: 2025, power: 37 kW (50.31 HP), _____Schäffer loader, type 3650, with ROPS operator protection cab Kubota diesel engine D1803-CR-T3, 37 kW = 50 hp Rear weight end plate, high speed gear 20 km/h, hydraulic tool locking, retention system with operating manual Special equipment: Lugged weight 100 kg Hydraulic connections with quick-release couplings Lighting system TÜV certificate for working machinery, self-propelled < 25 km/h (lighting system according to StVZO required) Set of work lights, LED, 800 lumens (2 at the front and 1 at the rear) Towing device with pin and lashing eyes Tires 15.0/55-17 AS, 6-hole rim, offset -45 Lhjdpfx Apsx Evdvemoi Attachment frame Euro-WS, hydraulic locking Location: null

Condition: used, Year of construction: 1996, Max. sheet length: 4720 mm Motor power: 2.2 kW Roller diameter: 600 mm Lsdpfey Rz Htex Apmjhi Max. cutting height: 395 mm Max. cutting width: 585 mm Table can be tilted: Yes Stand side: left Guide rail: can be used on both sides Saw blade guide position: top and bottom Saw blade guide type: roller guide Design: stationary Safety switch on the doors with motor brake Weight approx.: 300 kg Dimensions: 1115 x 670 x 2115 mm Location: Nattheim

Condition: new, Year of construction: 2025, We are the official Sunward dealer for Berlin, the state of Brandenburg, and Eastern Saxony. Visit us and be impressed by our wide selection and outstanding quality. We always have around 20 excavators in stock. Mini Excavator Sunward SWE25UF – Zero Tail Swing New machine Operating weight: 2,650 kg Kubota 3-cylinder diesel engine D1105 Power: 15.4 kW/2400 rpm Cab with suspension seat, heating, and radio/USB Width: 1.50 m Two travel speeds with auto shift Articulated boom (work directly against walls and hedges) Long dipper arm Max. digging depth: 280 cm LED work lights Aux 1 proportional on joystick Aux 2 proportional on joystick 2x auxiliary hydraulic lines (for grab/hammer/shear) 5-year warranty Optional equipment: MS03 quick coupler Attachments such as buckets, hydraulic hammer, grab Powertilt available on request Ledpfeyq A Rlsx Apmohi Matching trailers also in stock. All information subject to change. Take advantage of this unique opportunity to get a professional-grade machine at an unbeatable price. Sunward is among the world’s top 20 excavator manufacturers. Inspection possible at any time by appointment (please call ahead). Trade-in of your used machine possible. For quotations, please provide your complete address and email address! As a Sunward dealer, we are responsible for the following areas: Districts: Wittenberg, Nordsachsen, Leipzig, Leipzig (city), Elbe-Elster, Oberspreewald-Lausitz, Cottbus (city), Spree-Neiße, Oberhavel, Barnim, Märkisch-Oderland, Frankfurt Oder (city), Oder-Spree, Dahme-Spreewald, Teltow-Fläming, Potsdam-Mittelmark, Potsdam (city), Brandenburg (city), Havelland, Berlin (city).

Condition: new, functionality: fully functional, Year of construction: 2024, load capacity: 3,800 kg, lifting height: 10,000 mm, fuel type: diesel, mast type: telescopic, power: 79 kW (107.41 HP), empty load weight: 7,330 kg, drive type: Diesel, Rigid telescopic forklift Mast type: Telescopic Speed class: 40 Condition: New machine Technical condition: New Front tires type: Air Front tires Size: 400/70-24 Front tires Condition: 80 - 100% Rear tires Type: Air Lhodpfx Asw Eqc Tspmoi Rear tires Size: 400/70-24 Rear tires Condition: 80 - 100% Description: - FEM carrier incl. forks and load hook - € 2.650,00 - Earth bucket 2200 mm 1 m3- - € 1.998,00 - Adapter Euro mount - € 1.339,00 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab, air conditioning, CE certificate, exterior mirrors, joystick, rotating beacon, windshield wipers, LED, Specifications: -load capacity 3800kg -lift height 10,0m -MAX gradeability 40% -unladen weight 7330kg -engine KUBOTA 79,5kw ( 107 HP ) -capacity 3769 cm³ -exhaust standard Tier4f -steering all-wheel steering / crab steering / front wheel steering -rear hydraulics - 40 km/h -air conditioning -air suspension seat -carrier plate with hydraulically operated quick coupler -steering indicator light

Condition: new, pressure 500 t column daylight 600 mm stroke 600 mm table surface area 3500 x1500 mm 600 mm feed down 8 mm/sec feed up 16 mm/sec travel on the bed 2200 x 900 mm total power requirement 30 kW weight of the machine ca. 28 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards - All cables are labeled and clearly arranged - All electrical components are from Siemens CONTROL PANEL - Stroke control in any position - X, Y, and Z-axis movement via remote control - Stroke adjustment via sensor SAFETY Lsdefv Awhopfx Apmehi - The machine complies with the EC safety standards 2006/42/EC Machinery Directive, EN ISO 16092-01 and 16092-03 - Two-hand operation - Emergency stop button - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION – The price includes transport costs, installation, and training at the customer's factory. – Hydraulic oil is not included in the price. – All handling costs (e.g., crane, forklift, etc.) are borne by the buyer. 5. WARRANTY – The machine has a 2-year manufacturer's warranty. – This warranty covers the delivery of all spare parts required for repair and service of the machine. Damaged parts will be returned to the manufacturer after replacement with a new part. – This warranty does not cover parts damaged due to improper use.

Condition: used, Year of construction: 2021, front tire size: 600/65R28, rear tire size: 710/70R38, Equipment: compressed air brake,

Condition: new, functionality: fully functional, mileage: 0 km, color: red, empty load weight: 2,050 kg, maximum load weight: 650 kg, lifting height: 3,330 mm, digging bucket width: 1,160 mm, Year of construction: 2025, Equipment: pallet forks, standard shovel, TECHNICAL DATA: Model: VOLT 600 Payload (kg): 650 Unladen weight (kg): 2050 Bucket volume (m³): 0.25 Maximum steering angle: ±45° Turning radius (mm): 2050 Rear axle oscillation angle: 19° Full cycle time (s): 8 Operating time (h): 6 Speed (km/h): Slow: 10 km/h, Fast: 20 km/h Dumping height (mm): 2170 Lifting height (mm): 3330 Dimensions (mm): 3810 × 1260 × 2270 Dumping reach (mm): 405 Bucket width (mm): 1160 Wheelbase (mm): 1380 Track width (mm): 890 Ground clearance (mm): 200 Ledow Ufpljpfx Apmohi BATTERY: Model: 3-EVF-200 Type: Maintenance-free lead-acid battery Quantity: 12 Capacity (kW): 14.4 Nominal voltage (V): 72 Charging time (h): 8 System voltage (V): 12 Electrical system: AC MOTOR: Voltage (V): 72 Power (kW): 5 Displacement (ml/r): 23 Nominal speed (rpm): Slow: 800 rpm Fast: 2200 rpm System pressure (MPa): 16 Hydraulic system: Steering type: Fully hydraulic steering System pressure (MPa): 14 Steering pump: 5–125 Cylinder size (mm): 63 × 190 mm Number of cylinders: 1 DRIVE: System: AC Voltage (V): 72 Power (kW): 4 × 2 Number of motors: 2 Tyres: 26×12.00–12 Tyre pressure (MPa): 0.25 PRICE: €14,500 net €17,255 gross KINGWAY DEUTSCHLAND is the exclusive stationary distributor of the Kingway brand in Germany. Here you can inspect and test all machines on-site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a vast selection of machines in stock, with around 100 units available at any given time. We deliver machinery throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and provide our customers with access to all spare parts as well as a mobile service. KINGWAY DEUTSCHLAND e. K. Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,000 mm, height adjustment type: electric, total height: 2,200 mm, total length: 3,550 mm, total width: 2,000 mm, overall weight: 870 kg, grinding length: 1,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 3,550 mm, space requirement width: 2,000 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sanding machine MS92-150 3-cornered sanding belt 150x7100 for manual sanding, matting and polishing. For processing steel, stainless steel and brass. The scope of delivery includes - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking regulation - Sanding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Original equipment sanding belt - Operating instructions + manufacturer's declaration - CE version Lhedpotwb U Ajfx Apmsi The stable machine frame in welded steel construction results in very smooth machine operation. The two machine stands are equipped with an offset so that longer parts than the machine table can be sanded. The sanding belt guide via 3 belt deflection rollers results in the largest possible open working area for the operator and therefore good working conditions, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. The belt has adjustable pneumatic belt tension. The dust collection device is dimensioned so that the sanding dust is collected and directed to the extraction nozzle when connected to an appropriate extraction system. The sanding unit is mounted on backlash-free roller guides to ensure effortless operation. The machine table can be easily and quickly adjusted to the correct workpiece height using the electromotive table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be pushed under the sanding belt when loading. The electrical controls for the main functions are arranged in the middle of the machine for ease of use. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Switch cabinets and small housing in " light gray " The machine is supplied as standard with an original equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling the workpieces. The handling device is mounted in the center of the table under the insertion frame. To work with the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing with the rotary axis, on which a brake disk is mounted at the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5° and 90°. An additional locking disk is attached to the swivel head, which is used for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically using a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with the insert frame in place = 80 daN Workpiece weight when using the handling device in relation to the clamping plate = 25 daN or 120 Nm in relation to the center of the rotary axis.