Spring coiling machine

WAFIOS UFM30

Condition: used, Year of construction: 2019, functionality: fully functional, CNC SMOOTH G, travels 730 x 730 x 730 mm, 2 pallets 500 x 500 mm, spindle speed 18,000 rpm, 120-tool magazine, max. workpiece diameter 800 x 1000 mm, rapid traverse 60 m/min, through-spindle coolant 15 bar, RENISHAW preparation, NC rotary table with 360.00 positions, CONCEP conveyor. Redpfx Asxcvycja Ujp

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 Rodpfxowu Tu Dj Aa Usp WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: good (used), functionality: fully functional, Year of construction: 1989, number of rollers: 3, Over roll 280mm, 12mm Prebending, capacity 18mm 3x top roll diam. Rodpfx Aaewtp Hao Uop Weight 7,100kg

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm gear width 26 mm max. module 31 min. module 0,1 Control Siemens 840 D SL Number of working hours 9598 h total power requirement 45 kW weight of the machine ca. 7 t dimensions of the machine ca. 4x3x2,5 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm Redpfev Ehbbjx Aa Ujp and workpiece axis Stand inclination range (manual) - 1/+ 11° Tool holder (manual clamping) HSK-D63 (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg with robot cell

Year of construction: 2007, condition: ready for operation (used), An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3) Wilson X-Sharp tool grinding machine. Documentation available. On-site inspection is possible. Rsdpfewhp N Dox Aa Uep

Condition: good (used), functionality: fully functional, We offer for sale a complete line for multi-point automatic welding of SCHLATTER brand steel wires. We have three fully operational production lines. There are also automatic machines for the production of transverse wires (so called slitting machines with a cutter). Rodpfx Aotvpilja Uop We also have a number of single point welding machines for steel wires.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2-1, 2006, Eurobend CNC 16x4 rebar from coil straightening and cutting machine in used but working condition. 4 x 5 Ton decoilers with pneumatic brakes. 4 x rotor for diameter 8-10-12-16 mm rebar wire straightening and automatic cutting with hydraulic moving cutters. 1 line or even up to 4 lines together cutting. Rjdpfx Aaordvq Aj Ujp PC with barcode scanner option. Cutting length up to 14 meters and more. Pockets for storage. Chain conveyor for transport of bundles.

Condition: good (used), Year of construction: 2017, Sahinler 4R HSS 20-280 Hydraulic 4-roll plate bending machine – Year 2017. Bending length 2050 mm Max. bending capacity - mild steel 20. Upper roll diameter 280 mm Lower roll diameter 280 mm Lateral roll diameter 220 mm Rjdpfx Aaexau D Ie Uop Bending speed 1,5 / 5 m/min. Motor power 16 kW

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR Rsdpfxstrd T Tj Aa Usp 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: excellent (used), Year of construction: 2019, Doosan Puma TT2100SYY Mfd. 2019 Tooled as pictured Specifications SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM Rjdpfxew Dvnxj Aa Ujp Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING 2 machines available