Chain excavator

WACKER SE 14.504 -Z+Power-tilt

Condition: used, Year of construction: 2012, operating hours: 5,570 h, Digging depth approx. 5,000 mm, Discharge height approx. 5,700 m Engine: Deutz 4-cylinder TCD 2012-L04, 5.1 km/h, 500 series rubber tracks, approx. 2,490 mm dozer blade, additional piping - 6x approx. 1.95 m. Digger bucket, Powertilt PTS-10 swivel device, Lehnhoff mechanical quick coupler MS 10, Giedpskd Hipefx Abkow approx. 1.95 m digger bucket + approx. 50 cm deep drainage bucket ----Sale only to commercial customers. IN THE CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE. INCLUDING EQUIPMENT + ACCESSORIES. Our general terms and conditions (see imprint) form the basis for all purchase contracts, invoices, proforma invoices, orders, and sales discussions.

Condition: used, Year of construction: 1980, grinding length 500 mm grinding width 200 mm workpiece height 290 mm Machine from the German Federal Institute of Physics and Metrology - geometrically revised - electrics tested, fully functional, relevant parts replaced - all wear parts replaced - colour light grey, colour condition good Equipment: - electro magnet 500x200mm - grinding spindle overhauled 2-axis display for Y and Z axes Automatic delivery for Y and Z axes Y-axis with zero shutdown Manual hand dresser Stepless speed for grinding wheel Gjdpfxewb Hygs Abkjiw V-constant via disc wear Paper band filter system, used Max. height with 250 disc diameter 290mm max. grinding area 600x250mm max. load incl. magnet 100kg Warranty: 1 year on geometry and electronics, Germany-wide Delivery: ex works Shipping time: immediately Payment: before pickup Acceptance at our premises Shipping according to your specifications

Condition: good (used), Year of construction: 2017, operating hours: 8,760 h, Vehicle description TAKEUCHI TB 2150 tracked excavator Year 2017 acc. Counter 8.760 hours 85 KW 15.075 KG - hydr. quick coupler - Backhoe bucket Gjdeugf U Aopfx Abkjiw - Slope bucket NEW - hydr. swivel arm - hydr. quick coupler - hydr. dozer blade - electr. tank pump - ready for immediate use - 270cm width Sales price: 54.900,-- net also favorable delivery possible!

Condition: used, power: 130 kW (176.75 HP), color: orange, overall weight: 29,100 kg, number of seats: 1, Year of construction: 2010, operating hours: 16,630 h, Equipment: additional headlights, air conditioning, cabin, gripper hydraulics, hammer hydraulics, Adjustable boom Quick change device Godov Ak Hzjpfx Abkjiw 600 chains Errors excepted

Condition: good (used), Year of construction: 1965, Model maker milling machine with swivel head, MK 4, rotary table, d. Accessories Giedpfx Asq Ixz Rsbkjw Year of construction: 1965 X (mm): 1000 Y (mm): 600 Mounting (iso/mk): 4 Power (kw): 2

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 11,500 h, * 11,500 operating hours * Operating weight: 15,700 kg * Engine power: 77 kW * Roadliner pads Gedpfx Absy Rm H Ejkjiw * Hydraulic quick coupler * Air conditioning

Condition: reconditioned (used), functionality: fully functional, power: 42.4 kW (57.65 HP), fuel type: diesel, overall weight: 7,065 kg, Year of construction: 2020, operating hours: 2,350 h, Equipment: UVV, additional headlights, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, onboard computer, rubber tracks, programmable additional control circuit with proport. control + AB, programmable additional circuit with proport. control, additional circuit for hydr. quick coupler, programmable additional circuit with proport. Control (electric power tilt changeover) Auxiliary hydraulics installed up to the dipper arm with high pressure shut-off valves, automatic speed reduction system, electric refueling pump, Load holding valve on the lift, stick and adjustment cylinders, overload warning device + pipe breakage protection, ROPS comfort cab, radio, automatic air conditioning, air-sprung driver's seat, key system for all locking functions, Load sensing hydraulic system, automatic hydraulic track tensioning, 400 mm rubber tracks, Godpfx Ast I Tp Sebkoiw Adjustable boom: hydr. SW Lehnhoff HS 08 incl. attachment kit, original Powertilt 174° slewing with load hook, electr. grapple changeover

Condition: used, Technical details: x-travel: 880 mm y-travel: 300 mm Gjdju Ndfhopfx Abkjiw z-travel: 900 mm w-axis: 60 mm spindle head swivable left - right: 60 ° table surface area: 880 x 300 mm machine weight approx.: 1200 kg dimension machine xH: 1,3 x 1,4 x 1,9 m incl. accessories *

Condition: good (used), Year of construction: 1998, functionality: fully functional, Universal tool milling machine Product: MACMON Type: M 100 ADR Technical Data: - Heidenhain TNC124 control - Machine number: 7989 - Year of manufacture: 1998 - Travel: X 310 mm Y 170 mm Z 330 mm - Speed range: 40-2500 rpm (infinitely variable in 2 ranges) - Feed rate: 10-800 mm/min (infinitely variable) - Rapid traverse: 800 mm/min - Equipment: Vertical & horizontal spindle (incl. lifting device for vertical spindle) - Table size: 600 x 215 mm - SK40 - Drive motor: 2.2 kW - Connected load: 5.5 kW - Weight: approx. 750 kg - Space requirement: 1000x1160x1400 Incl. complete documentation The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health. Giodsrwml Aopfx Abkew

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, space requirement width: 1,975 mm, space requirement length: 1,800 mm, space requirement height: 1,900 mm, Equipment: documentation/manual, Machine is in very good condition - used as a training machine until 2018; since then, the machine has hardly been in operation. Gedpfxew U Aaho Abksiw Operating voltage 400 V Spindle mount ISO 40 Quill stroke 100 mm Spindle speeds 63 – 3150 rpm Fixed table