Heavy duty roll

Vogel Rad-Durchmesser 200 x 80 mm

Condition: like new (used), functionality: fully functional, type of input current: three-phase, total length: 5,000 mm, total height: 2,400 mm, total width: 1,500 mm, overall weight: 1,200 kg, year of last overhaul: 2025, product height (max.): 120 mm, product height (min.): 10 mm, product length (max.): 550 mm, product length (min.): 50 mm, Ilapak Carrera 2000 PC Horizontal Flowpack Packaging Machine, machine in excellent condition – like new. The machine has undergone a complete overhaul, which I performed personally. I worked as an Ilapak service technician, so the machine has been fully restored to factory condition. It is tested, in excellent working order, and ready for immediate operation. Machine specifications: - Machine speed up to 100 cycles per minute - Sealing jaw length: 250 mm, brand new straight knife - Servo motors on each axis - Permissible product dimensions: length: 50–550 mm, width: 20–230 mm, height: up to 120 mm - Fixed forming box Kodsxw Ilaopfx Ampelr - Maximum film roll length: 630 mm - NPNB system (No product no bag) - Sensor for operation with printed film - Total machine length: 5 m, width: 1.3 m, height: 2.4 m - Weight: 1,200 kg Additional installed equipment: - ICE ZODIAC Videojet Datflex 53 mm thermal transfer printer - HERMA H400 16R labeller Possibility to customise the machine for packing specific products.

Condition: used, mileage: 210,000 km, power: 80 kW (108.77 HP), first registration: 07/2007, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro4, number of seats: 3, total length: 5,998 mm, Equipment: ABS, central locking, Chat via WhatsApp now: Quick & easy contact with our sales consultant. Attention! Sale primarily to commercial customers. Internal ID number: [2888] Engine warning light ON ---- Vehicle highlights: * 19% VAT can be shown separately * German vehicle * 2nd owner * Euro 5 standard Special equipment: Storage: luggage net on rear wing door, driver/passenger airbag, audio system RCD 2001, timber flooring in load compartment, rear wing doors with glazing, partition wall with window in load area, spare wheel with standard tyres, passenger double seat in cab, rear right step, high wood panelling in load/passenger compartment Further equipment: Storage: shallow tray/compartment above windscreen, driver’s airbag, traction control (ASR), entry handle on right rear pillar, body/superstructure: high roof panel van, body variant: high roof, fuel tank: 75 ltr, engine: 2.5 ltr – 80 kW TDI DPF, parking light control, wheelbase 3665 mm, right-hand side sliding door in load/passenger compartment, seat upholstery: fabric, driver seat height adjustable, front stabilizer, permissible gross weight 3.50 t, additional brake light ---- Looking for leasing or financing? We offer attractive options – also possible with no down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Business hours: Klsdpfx Asxd Nq Rjmpsr Mon–Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. Note: All information on the internet is non-binding and for general vehicle description only. Errors, typographical mistakes and prior sale excepted. The binding condition of the vehicle is determined solely by the purchase contract agreed on-site or by written confirmation. Vehicles with mileage over 50,000 km or older than 3 years are primarily sold to our commercial customers.

Condition: excellent (used), Superb condition, currently part of line in production with robotic top load machine picking cereal bars which are then loaded into this machine. Videos of line are available upon request. Can be seen running until near end of August 2023 Kodpfx Amjnmv Raopolr

Condition: used, Year of construction: 2003, operating hours: 4,428 h, Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 4428 - Drive system: CNC - Control system brand: Siemens - Power [kW]: 37.0 - Operating pressure [bar]: 4137 - X-axis travel [mm]: 6500 - Y-axis travel [mm]: 3300 Klsdpfxswnidho Ampsr Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Klsdot N Antjpfx Amper Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025.

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2 (with test certificate), double-walled, for above ground storage, with saddle feet, 1 dome, optical leakage warning device, limit value transmitter and complete tank fitting consisting of: - Filling pipe 3" with TW-lock - dipstick pipe 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hour) - 1 vent pipe 2" with vent cap. Tank is equipped with the above fittings at the factory and is cleaned on the inside. Capacity: 50.000 liters diameter: 2.500 mm length: approx. 10.800 mm Weight: approx. 8.800 kg The tank can be repainted in the RAL color of your choice and optionally equipped with a ladder incl. operating platform. A cost-effective delivery with our own truck is possible. Just let us know the place of delivery and you will immediately receive the exact freight costs. If you need any further information, just give us a call or send us an e-mail. Trade-in and purchase of tanks/containers is possible, just contact us for this. Delivery time after arrangement! We have such tanks of course also in the following sizes constantly in stock: Klsdpfxehvmitj Ampor - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters. Tank and apparatus Barth Ltd. Werner-von-Siemens-Str. 36 76694 Forst

Year of construction: 1979, condition: used, throat: 22/29 mm drive motor: bei 380 V ca. 0,55 kW space needed: 450 x 500 x 560 mm Ksdpfxozif Se Ampelr weight: ca. 6,5 kg pressure power: 30 kN

Condition: new, Year of construction: 2026, type of input current: AC, input voltage: 400 V, overall weight: 66 kg, Our electric chain saw with 5kw is ideal for sawing bundles of meter wood in connection with our sawhorse. Kedpsfnrx Tofx Ampelr By sawing whole bundles of firewood meter wood an enormous amount of manual work is not necessary! In a 1-man operation, up to 1 ster of wood and approx. 5 ster per hour can be processed within a few minutes. The average time per cut is 1.5 minutes.

Condition: used, Steel construction for crane system Width: approx. 8,5 m Length: approx. 7,95 m Plant dismantled The plant is sold "as is". Klodpfxobruzgo Ampjr Viewing: You are cordially invited to view the item - simply contact us and arrange an appointment at short notice. Attention: no guarantee, no exchange, no return possible.

Condition: new, pressure: 600bending length: 6050column width: 5100daylight: 680stroke lenght (max.): 455column throat depth: 450messurements (LxWxH): 7100x3275x3910weight approx.: 50.2004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 45Standard Equipment:KK Kletzer Europa We have developed a high-quality model specifically for the European market:The CNC press brake by KK Industries, made in Turkey. Model: KK Kletzer EUROPA XL The powerful EUROPA XL press brake stands out for its high precision, accuracy, and versatile offers a very large open height, resulting in a long cylinder stroke, and an extra-large throat depth to provide maximum flexibility during operations. Klodpfx Aed Ehh Rsmpjr We focus on delivering quality—reflected also in the control system:As standard, the machine comes equipped with the ESA S640 2D graphic controller. Additionally, the KKI EUROPA XL is equipped with CNC-controlled Y1, Y2, X, and R axes via the wning is also included and fully CNC-controlled through the same ESA S640. When it comes to tooling, we make no machine is fitted with premium top tools and dies from EUROSTAMP Italy. Naturally, a machine is only as good as the service behind t’s why we rely on highly qualified staff with many years of experience in CNC sheet metal processing. Technical Highlights: CNC axes: Y1, Y2, X, and R Controller: ESA S640 (2D graphical interface) Backgauge with double linear guides and ballscrews Motorized CNC-controlled crowning system Heavy-duty height adjustment with handwheel(from 175 tons: on linear guides) Laser safety system on the upper beam CE-compliant safety equipment Various options available Optional Controllers: ESA S640 – 15” 2D Touchscreen: ¤ 4,520.00 ESA 675 W – 21” 3D Touchscreen (Windows-based): ¤ 6,485.00 DELEM DA-66T – 17” 2D Touchscreen (Windows-based): ¤ 10,165.00 DELEM DA-69T – 17” 3D Touchscreen (Windows-based): ¤ 16,350.00