Straightening and cutting machine

Vitari

Condition: excellent (used), Year of construction: 1989, Machinetype: barbed wire machine Make: VITARI Dcedpfx Ahjw N D Susgoi Type: MFS Constr. year: 1989 line wire diameter: 1,6-2,8mm point wire diamter: 1,6-2,5 mm output – meter/min: 27-47 distance of barbs: 50-150mm Excellant condition

Condition: good (used), Year of construction: 1956, Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe Dedpfx Ahetzf N Rjgjci -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 - 1400 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg

Condition: ready for operation (used), technical Details: Speed - 130m/min. , Year - 2006, run out table - 6 m Wire diameter range 4-12 mm Dsdpfx Ajtndgpjhgsci

Condition: good (used), Year of construction: 1979, Complete production line for Technical and Commercial Chain Manufacturer - WAFIOS / VITARI / DANIELI / IPSEN Year - 1979/1989 Dsdpfx Ahjqy E I Usgsci Factory Consists : - Welding machines 14 pieces - Bending machines 10 pieces - Bending + welding machines - 2 pieces ( Wafios KEH3 +KER3 ; Wafios KEH5 + KER5 ) - Wire drawing line 7 blocks - Danieli with spooler - Cementation furnace - Annealing furnace Lots of sapare parts

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Dedpor Nfvmofx Ahgjci Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: like new (used), Year of construction: 1980, Technical details : Nail making plant consists : 1. Wafios N3 2. Wafios S75 3. Wafios S110 4. Vitari V14R 5. Vitari V17R 6. Moroni SPN 200 Djdpjit Rdwofx Ahgeci 7. Wafios Grinding machine MSD 500 8. Half automatic paking unit - 1-5 kg 9. Drum for cleaning and polishing nails - 2x400 kg/h Wire diameter - 1,2- 6,0 mm Nails lenght - 10 - 200 mm Capacity - 900 kg/h

Year of construction: 1980, condition: reconditioned (used), Technical Details : Wire Dimeter range- 4-14mm Dcedpfxehqfl Ae Ahgei Cutting lenght - 8,5m Speed -70 m/min. Reconstruction- 2022

Condition: new, Year of construction: 2026, Edge Sander Description: Sanding of curved materials using a side table. Simple and quick sanding belt replacement using a lever. Movable aggregate ensures horizontal and vertical operation. Additional table with adjustable height included as standard. Dcedpfevuggzex Ahgji Tensioning device ensures even sanding belt tension. Compact size of the device with a wide range of applications. Technical Data: Belt size: 2010 x 152 mm Worktable size: 790 x 221 mm Table height: 810 mm Stand height: 600 mm Additional rounding table size: 514 x 221 mm Maximum sanding length: 790 mm Dust extraction port diameter: 100 mm Edge and face sanding at an angle: 0 - 45° Belt speed: 840 m/min Motor power: 1.1 kW Power supply: 400 V Weight: 75 kg The price quoted is the net price. It does not include transportation costs

Year of construction: 1979, condition: used, Dimeter range- 3-10mm Dcodecv A I Nepfx Ahgji Cutting lenght -4m ,(possibly longer) Speed -90 m/min. Reconstruction- 2016 Control - PLC

Year of construction: 1985, condition: reconditioned (used), Technical Details : Wire Dimeter range- 4-12mm Gscxckebw Run out table - 4m Speed -80' m/min. Dodpsh In Thefx Ahgeci Reconstruction- 2022

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - Like new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in a vacuum Control stability: ± 2 K Temperature homogeneity: ± 6 K in the range of 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Dodpfxjiryyao Ahgjci Furnace working space: 360 x 400 mm Load: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum pressure in the cold state: < 5 * 10-5 mbar in a clean, dry furnace Installation area: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We assume no liability for the accuracy, completeness, and currency of the information provided.

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, Complete production line for Chain Manufacturer - VITARI Year - 1980 Line Consists : 1.Wire drawing machine SKP8 T.I. 95647 1.1. Producer: Tecno Impianti 1.2. Model SKP 8 2P Serial Nr 9564/7 1.3. Year of production 1995 -1999(depends on condition) 1.4. Country of origin Italy 2.Bending machine for roundlink chain production 2.1. Producer:Abbondio Vitari S.p.A . 2.2. Model CC18 2.3. Year of production 1973-1987 2.4. Country of origin Italy 3.Contact welding machine for roundlink chain production 3.1. Producer:Abbondio Vitari S.p.A . 3.2. Year of production 1978-1981 3.3. Country of origin Italy 4.Contact welding machine for roundlink chain production 4.1. Producer:Abbondio Vitari S.p.A . 4.2. Year of production 1978-1981 4.3. Country of origin Italy 5.Calibrating machine for roundlink chain production 5.1. Producer: Delmatic SNC 5.2. Model KTR 1 5.3. Serial Number K113-06-05-7 5.4. Year of production 2006-2007 5.5. Country of origin Italy 6.Manual contact welding machine for roundlink chain production 6.1. Model N12 6.2. Producer: CEA COSTRUZIONI ELETTROMECCANICHE ANNETTONI S.p.A. 6.3. Year of production 2005-2007 Dcedpfx Ajyfg Tgehgoi 6.4. Country of origin Italy Partly renewed (Pneumatic system, cooling system, etc) Production tool included For today got 6 same type lines, ready to use, ready for check. Any of them can be connected for check up. Delivery to EU included in price Our company also offers training and, if required, start-up services for putting the line into operation

Condition: used, Year of construction: 1987, functionality: fully functional, Complete production line for Chain Manufacturer - VITARI Line Consists : 1.Wire drawing machine SKP8 T.I. 1.1. Producer: Tecno Impianti 1.2. Model SKP 8 2P 1.3. Year of production 1995-1999 1.4. Country of origin Italy 2.Bending machine for roundlink chain production 2.1. Producer:Abbondio Vitari S.p.A . 2.2. Model CC18 2.3. Year of production 1973-1987 2.4. Country of origin Italy 3.Contact welding machine for roundlink chain production 3.1. Producer:Abbondio Vitari S.p.A . 3.2. Model MS6 3.3. Year of production 1986-1989 3.4. Country of origin Italy 4.Contact welding machine for roundlink chain production 4.1. Producer:Abbondio Vitari S.p.A . 4.2. Model MS6 4.3. Year of production 1986-1989 4.4. Country of origin Italy 5.Calibrating machine for roundlink chain production 5.1. 5.1. Producer: Delmatic SNC 5.2. Model KTR 1 5.3. Serial Number K113-06-05-7 5.4. Year of production 2006-2007 5.5. Country of origin Italy 6.Manual contact welding machine for roundlink chain production 6.1. Model N12 6.2. Producer: CEA COSTRUZIONI ELETTROMECCANICHE ANNETTONI S.p.A. Dodpfx Ahjyf Drmsgsci 6.3. Year of production 2005-2007 6.4. Country of origin Italy Partly renewed (Pneumatic system, cooling system, etc) Production tool included For today got 6 same type lines, ready to use, ready for check. Any of them can be connected for check up. Delivery to EU included in price Our company also offers training and, if required, start-up services for putting the line into operation

Year of construction: 2018, condition: new, loading capacity: max. 1.000 Kg. coil inside diam.: min. 400 mm Dsdjdx Ryyjpfx Ahgjci coil outside diam.: max. 1.100 mm coil hight: max. 800 mm

Year of construction: 2000, condition: like new (used), Second-hand machine which has never been used, YOM: 2000. Only the straightening part of the machine is available, thus, no the cutting system, neither the bank to receive cut parts (this can be purchased by the maker : Vitari). Capacity 4,0 mm max. Dcsdpfxjim Itte Ahgji