Lifting tables

UWM UWM 3000 big

Condition: excellent (used), Year of construction: 2017, Available: 2 pieces! condition to check Possibility to buy the high-lift order picker with a set of brand new batteries with a 2-year warranty for 3,500 euros or for 3,000 euros with used batteries Year of production 2017 Load capacity 215 kg Lifting height 3000 mm Travel speed 8 km/h Total length 1528 mm Battery voltage 24V Model EKM-202 Negotiable with larger quantities, big discounts! Ijdpfx Aaovday Hsgoat The agile and versatile EKM order picker is ideal for use in stores, for light maintenance work or order picking without a pallet. The stable mast allows you to lift items up to the third level of the rack - this is the best alternative to a traditional ladder. Automatically closing doors ensure operator safety even at high lifting heights. A sensor mat on the floor increases mobility in the driver's cabin, so the operator can freely choose his position on the standing platform. The spaciously designed workspace guarantees the operator greater comfort while driving and standing sideways. Good visibility in the direction of travel is provided. Ergonomically positioned controls allow simultaneous lifting and steering, which makes working with the EKM very efficient.

Condition: new, welding current 15 - 40 A Iodpfx Aoupxfheagjat cutting capacity 1 - 16 mm open-circuit voltage 96 V Required air-pressure min. 4 bar connected load 3,6 kW connected load frequency 230 V weight 9,0 kg Dimensions (LxWxH) 371 x 153 x 232 mm Exhibition machine !! Inverter plasma cutter with accessories: Cutting torch with 4 m cable, earthing clamp with 2.5 m cable, air pressure gauge, Mask and brush.

Condition: used, Year of construction: 1974, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 2100 mm centre distance: 2000 mm spindle passage: Bohrung ca. Ø 60 mm range of revolution per miute: 35,5 - 1800 / 18 step U/min rapid motion - x-axis: Support 4,2 m/min tailstock quill taper MT: MK 5 tailstock quill adjustment: 180 mm control voltage: 220 V weight of the machine ca.: 3,25 t dimension machine xH: 3,5 x 1,2 x 1,6 m Thread cutting possible, e.g. metric thread, module thread and inch threadEilgang Quersupport Futterschutz 2x Späneauffangwanne Zubehör: (siehe vergleichbar auf Foto) 2x Lünette (1x geschlossen und 1x offen) Planscheibe 3-Backenfutter Iaodpfou Ix Dcex Aagjt Backenpaare Flansch Spitzen div. Zahnräder *

Condition: new, Year of construction: 2025, Genie GS1932 E-Drive scissor lift, standardly equipped with AGM batteries etc., new, used, and demonstration machines available Iodpfx Aorhknvsageat

Condition: new, Year of construction: 2026, Table saw with right-sided table expansion, straight and angled fences. Machine features This machine is a powerful, precise and universal device in a compact body, created for small workshops, furniture manufacturers and carpenters. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Technical data Maximum saw/hole diameter 254×30 mm Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 65 mm 90º maximum cutting depth 80 mm Cutting width with expanded table 750 mm Extraction connector 100/25 mm Isdpfx Aaovxhi Eogjat Worktable dimensions 635×420 mm Expanded worktable dimensions 635×1500mm Motor power 2.2 kW (S1) 400V / 3.1 kW (S6) Weight 110 kg Dimensions 1450×1000×1100 mm Manufacturer: Cormak

Condition: new, Year of construction: 2026, Size: 6 Nominal heat output: 170kW Iasdpfx Aaodlhdboget -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed For rooms of: 4.800 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 40 - 50 kg/h Blower air capacity, free blowing: 14.000 m³/hour Outlet opening: Ø 700mm Flue pipe connection Ø 220 mm Weight: 2.150 kg SPS control cabinet: 380 Volt

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF-KBK1, DEMAG KBK crane sky crane track dimensions approx. 12m x 3.5m Please inquire about other dimensions! Payload / lifting load 125 KG - 0.125ton Technical data of the system: Crane track made from Demag KBK1 rails Iaodpfxopiarne Aagst The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drag, power supply, holders/suspenders etc. including 1 bridge with 125KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please ask for your crane runway with cantilever capacity and dimensions.

Condition: new, Year of construction: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Effective working area: 1520x3050 mm Max. Positioning speed: 120 m/min Max. Acceleration: 1,5 m/s² Positioning accuracy: 0,02 mm/m Isdpei Ar Ruefx Aagoat Repeatability: 0.03 mm/m Max. Table load: 1500 kg

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 400 mm, saw band length: 5,550 mm, saw band width: 80 mm, table length: 800 mm, table width: 1,060 mm, working height: 400 mm, - Italian manufacture - Lamella band saw - Unpainted - Very good condition - Used saw Ijdpjw H Rq Hsfx Aageat Band Saw: - Wheel diameter: 800 mm - Max. blade width: 80 mm - Max. cutting height: 400 mm - Main drive motor: 11 kW - Feed speed range: 2–40 m/min - Feed system with pneumatic pressure to the guide - Metal slip-in feed roller - Blade length: 5550 mm - Throat (blade-to-frame distance): 780 mm - Screw-type blade tensioning - Table size: 1060x800 mm - Tilting worktable: up to 15° - Extraction port diameter: 120 mm - Blade lubrication system - Foot brake - Cast wheels - Star/Delta starting - Power supply: 380V - Dimensions (LxWxH): 1600x1100x2400 mm - Weight: 860 kg Feed Unit: - Metal, toothed, drive roller - Five feed speeds, selectable by belt adjustment - Roller height: 30 mm - Feed motor: 0.75 kW - Pressure system

Year of construction: 1986, condition: not inspected (used), 6 head rotating vacuum capper rebuild 2017 as-is or tested and adjusted to customer needs. Iodpfxef Rk Agj Aagjat