Moving bezel

unbekannt Spitzenhöhe 192 mm

Condition: excellent (used), Year of construction: 2004, Carl Cloos GLC 503 Quinto SD welding machine. A total of 4 units available. Year of manufacture: 2004-2004-1999. Price refers to 1 unit. Bdjdpfx Aketkuk Rjiei

Condition: excellent (used), Year of construction: 2019, operating hours: 403 h, functionality: fully functional, turning length: 1,200 mm, spindle bore: 120 mm, controller model: Siemens 840 Dsl, Equipment: documentation/manual, Technical data: Turning length 1200 mm Chuck diameter 350 mm Working stroke X top/bottom 200 mm Working stroke Y. axis 210 mm (+130/-80) Working stroke Z. axis 1200 mm Maximum travel speed W/X/Y/Z meters/minute 45/40/40/46 Ball screw diameter W/X/Y/Z mm 40/40/40/40 Profile rail guide, B/X/Y/Z mm 45/45/45/55 Tool flight circle 700 mm Maximum center distance 1200 mm Main spindle/counter spindle Spindle bearing diameter 120 mm/160 mm Spindle passage 65/105 mm Spindle bore diameter 80/120 mm Spindle flange/spindle head DIN 55026 A6 / A8 Drive power 100% ED 22 KW/67.4 Drive power, 40% ED 24 KW/80 Nominal speed 1400 rpm Bdsdovw Upcepfx Akiei Maximum speed 5,700 rpm Torque 100% ED 150 nm/585 Torque 40% ED 191 nm/795 C-axis resolution 0.001 degrees Both turrets: Tool holder: VDI 40 Maximum speed rpm 6000 torque drive 12,000 speed drive Maximum drive power kW: 28.5 torque drive 23.5 speed drive Maximum torque (25% ED) Nm: 85 torque drive 56 speed drive Dimensions: 4500 x 2500 x 2500 Weight approx. 16000 kg Control: Siemens 840 Dsl

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,84 t dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths Bdedeupw R Ajpfx Akiji • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements

Condition: used, Year of construction: 1994, Technical details: welding current - continuous: 40...400 A Length: 900 mm height: 1200 mm total power requirement: 13,8 kVA weight of the machine approx.: ca. 180 kg space requirements of the machine approx.: B:0,6xL:0,9xH:1,2 m MIG MAG Welding device -welding transformator as spare part donor - capacity 40A/15V up to 400A/34V Bdsdpsu Nwx Uefx Akioi - open circuit voltage -58V - characteristic constant - protection type IP23 - isolation type F - water cooled Circuit board A5 missing! *

Condition: new, Year of construction: 2026, Yanigav Pile Driver RE800GIII • Weight: 1200 kg • Dimensions (W x H): 2.00 x 2.60 m (transport position) • Blow frequency: 670–1500 blows per minute Bedpfor Ezhyjx Akiedi • Impact energy: 280 Joules • Bell inner diameter: 120–150–200 mm • Pile length up to 3 m

Condition: new, Year of construction: 2026, Yanigav Pendulum Pile Driver HS3 / HSG3 • Weight: 510kg / 575kg • Drive: tractor pump / own pump • Dimensions (LxWxH): 2.20x1.00x3.25m • Maximum striking force delivered by 105 kg monoblock • Allows operation to the left, right, and in line with the tractor • Post length up to 2.5m Bdedper Ezmpsfx Akiei Price: €7,000 / €8,860 excl. 20% VAT.

Condition: used, Vise Jaw width 200 mm Jaw height 80 mm Base plate: width at the bottom 250 mm Bdjdpfsdd Tpisx Akiei Length at the bottom 500 mm Opening width 250 mm Weight 72 kg

Condition: good (used), Overhead crane, crane, electric hoist, lifting device, motor winch, motor winch, tackle, winch, pulley system -Rated load: 2,000 kg with pulley -Lifting speed: 5/15/30 m/min -Steel cable: Ø 8 mm -Lifting height: approx. 30 m -without operation Bdedpfx Aksd Dzlmeisi -Dimensions: 1600/330/H470 mm -Weight: 356 kg

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25,4 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0,1 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10.000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0,1 [°] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 5 GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8.000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 6.000 [rpm] SECONDARY OPERATION - Number of positions : 7 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 13 [kVA] Bdsdswgpchspfx Akioi WEIGHT & DIMENSIONS - Machine floor space : 2.270 x 1.650 [mm] - Machine height : 2.200 [mm] - Machine weight : 3.500 [kg] EQUIPMENT - CNC : Fanuc PNC DECO - Rotating tool motor on : S2, S3, S5 vertical + horizontal - Rotating guide bush - Parts catcher - Chips conveyor - Coolant tank - Bar loader : IEMCA MINI BOSS 325

Condition: as good as new (ex-display), Exhibition machine The Holzprofi dehumidifier HT-100 is ideal for drying wood. The dehumidifier can also be used for drying cellars, construction sites, etc. Advantages and features: - High drying performance even at low temperatures, thanks to hot gas defrosting - Good dehumidification even at low humidity - High efficiency for energy-saving operation - High-quality machine from the industrial sector, durable and suitable for many purposes. - The practical control switches the dehumidifier off automatically when the desired humidity is reached. - Direct hose connection to drain large amounts of water without any problems Suitable for most soft and hard wood types such as spruce, beech, ash, as well as exotic woods and firewood. Due to the high tannic acid content, oak is conditionally or not recommended - as with other dehumidifiers. Bedjvrvmxspfx Akiodi Technical data: Nominal power consumption: 1050 W Max. power consumption (35°C, 95% R.H.): 1480 W Air flow rate: 1100 mc/h Coolant: R410a (environmentally friendly) Operating range (temperature): 1-35 °C Operating range (relative humidity) T