Milling adapters 6 pieces

unbekannt SK40 / MK4 MK3

Condition: repair required (used), Machine number: 1464 TyP / Model: FUW 250/IV travel x-y-z: 400 - 220 - 400 mm table: 630 x 350 mm table clamping surface: 700 x 300 mm speed range: 45 to 2.240 rpm spindle mounting: SK 40 feed range longitudinal: 6,3 to 1.250 mm/min feed range cross: 6,3 to 1.250 mm/min Connection: 7.4 kW accessories/equipment: vertical head Condition: 2 controllers defective Note: machine repair EUR 2.000 Lodpjd Hl Stofx Aa Eehr weight: 1,45 t dimensions: 1.500 x 1.600 x 1.800 mm

Condition: excellent (used), Year of construction: 1994, Manual Plus control unit Turning diameter 260 mm Swing diameter 475 mm Center distance 1000 mm Lsdpfxjt T T Urs Aa Ejhr Turning length 880 mm Spindle speed 3,000 min-1 4-fold parat holder Tailstock

Condition: used, hammer drill, chisel hammer, combi hammer, Bosch hammer, cordless hammer drill -Manufacturer: Bauhaus Toolson, cordless drill type PRO-AS 18 Li-1 Lodpfx Aouwgg Dsa Eohr -incl.: charger and battery -Number: 4x drill drivers available -Price: per piece -Transport dimensions: 240/180/H240 mm -Total weight: 1.9 kg/piece

Condition: good (used), Center height: 205 mm Center distance: 1500 mm Swing diameter: over bed 410 mm Lsdjv Du Ixspfx Aa Ejhr Spindle bore: 47 mm Spindle mount: size 6 Tailstock taper: 4 MK Spindle speeds: 28 - 1250 rpm Feeds: longitudinal/transverse 0.03-1.3/0.008-0.33 mm/rev Thread pitches: 0.25 - 76 mm Electrical connection: 380 V, 3 kW Space required: 2800 x 1100 x 1600 mm Weight: 1330 kg

Condition: used, Year of construction: 1987, turning diameter over bed 0560 mm turning diameter over slide rest 325 mm turning length 1500 mm spindle bore 62 mm spindle turning speed range 11,2 - 2240 U/min total power requirement 9 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,6 x 1,6 m Lodpfx Aew Ny S Dsa Ejhr With Multifix incl. 2 holders, chuck, rotating center and DRO.

Condition: used, turning diameter over bed 480 mm turning diameter over slide rest 280 mm turning length 1100 mm Lhjdpfxjupxyro Aa Ejr turning diameter in the gap 500 mm turning speeds 18 - 900 U/min centre height 240 mm spindle bore 52 mm total power requirement 7,5 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,7 x 1,5 x 1,7 m Lead and feed spindle lathe - Forkardt 3-jaw chuck F250mm - Multifix tool holder including 3 cassettes - Coolant system - Machine light - Chip protection wall - Chip tray - Centering point

Condition: as good as new (ex-display), Year of construction: 2025, Center height 230 mm Center distance 1500 mm Swing diameter over bed 465 mm Swivel diameter over cross slide 270 mm Swivel diameter in the bed bridge 690 mm Bed bridge length 240 mm Spindle bore diameter 58 mm Spindle face CAMLOCK D1-6 Spindle bore taper Morse 6 Speed ​​range 25 – 2000 rpm (12 speeds) Tailstock taper Morse 4 Tailstock sleeve travel 128 mm Ljdpfx Aaoxbzqqs Eshr Motor power 5.5 kW Machine weight 1720 kg Machine dimensions 2700 x 1080 x 1370 mm Accessories - 3 axis DRO - 3 jaw chuck - 4 jaw chuck - Faceplate - Tailstock - Cooling unit - 4-.fold toolholder - Splash guard - Chuck protection - Manual The lathe is in factory brand new condition. Showroom model. It is with 12 months of warranty in Hungary.

Condition: new, Bernardo drill grinding machine DG 32 Pro Specifications Lhodogd H U Uopfx Aa Esr Drill diameter 2 - 32 mm point angle 90° - 135 Speed 4800 rpm Motor power 0,25 kW Voltage 230 V length 350 mm width 210 mm height 305 mm Weight approx. 32 kg Scope of delivery - Diamond grinding wheel SBC - Collets ER 20, 3 - 12 mm, 10 pcs. (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 mm) - Collets ER 40, 13 - 32 mm, 20 pcs (13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31 / 32 mm) - Collet holder ER 20 resp. ER 40 Features - Including device for pointing, i.e. better centering of the drill tip on the workpiece and reduction of the necessary feed force - 30 pcs. ER collets included in the scope of delivery, which are also suitable for clamping intermediate sizes - Additional station for relief grinding of the drill cutting edges (clearance angle) - Universally adjustable point angle from 90° - 135 - Rotor with precision ball bearing ensures very smooth operation - Fast and precise working results due to simple operation - Vibration-free running due to high dead weight and rubber feet

Condition: good (used), Digital read-out With milling and drilling head Lhedpfjw Nnutex Aa Esr Working travels 330 x 400 x 475mm Table size 650 x 245 mm Spindle taper for collets ISO 40 Spindle speeds 63-2'800 rpm Misc.accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 1974, turning diameter over bed slide: 480 mm, center width: 1,500 mm, Center Lathe Manufactured by Heidenreich & Harbeck Type Hanseat 480 Fully overhauled in 2012 Technical Specifications Manufactured by Heidenreich & Harbeck Type: Hanseat 480 Year of construction: 1974, fully overhauled in 2012 Control: Conventional Center distance: 1500 mm Turning diameter over bed: 480 mm Turning diameter over support: 295 mm Spindle speed: 20 – 2190 rpm Dimensions: L 3.50 x W 1.20 x H 1.55 m Ljdpfx Aaswm D Ile Ejhr Machine weight: 1200 kg Equipment - 3-jaw chuck D 250, built-in - Faceplate D 400 - 10 quick-change tool holders - 1 steady rest All information is provided without guarantee. A live demonstration is possible at any time in our exhibition hall.