Crushing and screening plant

Unbekannt Schotter-Aufbereitungsanlage

Condition: used, mileage: 199,000 km, Year of construction: 2007, Three-axle 6x4 truck, equipped with a Coime Maico concrete pump with a 27-meter boom, auxiliary engine, ZF manual transmission, Euro 5 emission standard. Iijdpfxszrn S Ns Afush Please note that the vehicle description is provided for informational purposes only and may contain errors or inaccuracies. We therefore invite you to contact us to verify the accuracy of the data.

Condition: excellent (used), Year of construction: 2018, operating hours: 6,185 h, functionality: fully functional, Tsugami B0326E-II Long-Turn Lathe Manufacturer: Tsugami Model: B0326E-II Year of manufacture: 2018 Control: Fanuc 32i-B Isdpfx Aozlp Swsfuoih Technical data Max. bar diameter: 32 mm Max. machining length: 320 mm (with guide bush) Machining without guide bush: 70 mm Main spindle: 8,000 rpm Counter spindle: 8,000 rpm Tool spindles: 6,000 rpm Number of controlled axes: 6 Tool stations: 31 standard (optional up to over 40, depending on configuration) Driven tools Y-axis C-axis, main and counter spindle Rapid traverse up to 32 m/min Main spindle motor: 3.7 / 5.5 kW Counter spindle motor: 2.2 / 3.7 kW Connection power: 21.4 kVA Machine weight: approx. 3,500 kg Dimensions (L × W × H): 2,150 × 1,280 × 1,930 mm Equipment ✔ Fanuc 32i-B CNC control ✔ Counter spindle ✔ Y-axis ✔ C-axes ✔ Tool package ✔ Top Infinity bar feeder magazine ✔ Kraft & Bauer fire extinguishing system ✔ Coolant system ✔ Chip conveyor Very well-equipped Tsugami B0326E-II long-turn lathe from 2018 with Fanuc 32i-B control. The machine features a main and counter spindle, Y-axis, and driven tools, making it ideal for high-precision series production of complex turned parts up to Ø 32 mm. The scope of supply includes an extensive tool package, a chip conveyor, a Top Infinity bar feeder magazine, and a Kraft & Bauer fire extinguishing system. The machine is in good condition and is available for immediate delivery after consultation.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 220 V, warranty duration: 12 months, total height: 730 mm, total length: 1,115 mm, total width: 490 mm, overall weight: 50 kg, Machine for mini donuts, made of stainless steel materials according to AISI 304, according to the regulatory documents for the food industry. Iodpfewp Il Hsx Afueih Automatic dosing, turning and removal of the donuts from the fryer. Electronic counter Easy to service.

Condition: reconditioned (used), K.H.D. Calibrator 1300H . Without frame . Iedpfovt Su Isx Afueih With hydraulic-unit, electric motor and Voith Turbo coupling . With new cone and shell . Overhauled, sandblasted and painted .

Condition: as good as new (ex-display), Year of construction: 2025, Complete solution for transporting bulk goods such as shredded goods, wood chips, wood pellets, granulate, etc. Aluminum angled conveyor incl. substructure horizontal range 2,500mm (adjustable) Rising range 5,000mm (customizable) Angle in the bend 35,40 or 45° Feed height: horizontal (individual) Discharge height individually adjustable Iiedpfxji Igdfe Afush Construction: height adjustable ( to move) Conveyor belt width 500mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x25mm T-50 lugs - 400mm pitch 2-layer particularly laterally stable Fixed overbelt magnetic separator: Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW We always have various systems of this type in stock. The delivery time for an individual system is currently around 2-3 weeks, depending on the manufacturing effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: good (used), - Material: AISI 304 / upper plate: AISI 316 Iijdpfx Afswff N Isush Dimensions: - Depth: approx. 1600 mm - Width: approx. 1750 mm - Shell height: approx. 2500 mm - Ground clearance: 280 mm - Total height: approx. 3200 mm Equipment: - Rectangular manhole 420 x 540 mm - Residual drain: disc valve NW 40, Friedrich no. 2 Ø 40 - Clear drain: disc valve NW 40, Friedrich no. 2 Ø 40 - Level indicator - Tap - Thermometer - Dome NW 500

Year of construction: 1996, condition: refurbished (used), Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, etc. The comminution takes place in the bottom part of the grinding chamber where the rotor plate fitted with grinding tools (hammers or pins) impacts and projects the particles against the liner in order to break them. Within the same chamber, the air circulation brings the fines to the rotating classifier wheel where oversize grains are rejected to then return to the griding zone for reprocessing, whereas the fine particles make it through the classification step to the next stage, normally the filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc and the classifier wheel, air volume, feeding rate, etc. Material of construction: stainless steel for product contacted parts Without wear protection Non Pressure Shock Resistant (NPSR), non-ATEX Scope of supply: Hosokawa Alpine ZPS 315 mill with motors, a set of grinding tools of choice and installation table Ijdpfxekqlf So Afueih

Condition: new, Year of construction: 2025, Ref. -No.: 10465 Manufacturer: IGREK Type: FR 1000 T Year of construction: 2025 Type of control: CNC-Steuerung Control: Siemens / Heidenhain Storage location: Istanbul Country of origin: Türkiye X-Travel: 1350 mm Y-Travel: 1500 mm Z-Travel: 900 mm B-Axis: ° C-Axis: 360 ° Spindle Taper: HSK-T100 Turntable diameter: 1000 mm Table Load: 2000 kg Tool Piece Magazine With: 48 Pcs./pcs. Isdpfx Asxmd S Iefujih Spindle Speed: 15000 RPM Rapid Travel X/Y/Z: 48 mm / min Drive Capacity - Spindle Motor: 35 kW Max Spindle Torque: 220 Nm Machine length: 3200 mm Machine width: 6400 mm Machine Height: 4050 mm Weight Of The Machine Ca.: 40 t Further information: IGREK FR 1000 T – Compact precision for demanding applications The IGREK FR 1000 T is a CNC turning and milling center with 5-axis simultaneous machining that combines state-of-the-art technology in a compact design. Manufactured in 2024, this machine is ready for immediate use and is ideal for the precise machining of medium-sized workpieces in a wide range of industries. Key features: Compact performance: Traverse paths of 1,350 mm (X), 1,500 mm (Y) and 900 mm (Z) and a table load capacity of up to 2,000 kg provide optimal conditions for flexible applications. 5-axis simultaneous machining: With a B-axis (°/°) and a C-axis (360°), even complex geometries can be precisely machined. High-performance spindle: The spindle achieves speeds of up to 15,000 rpm, a maximum torque of 220 Nm and a drive power of 35 kW – ideal for demanding milling work. Extended capacity: A tool magazine with 48 tool spaces and the HSK-T100 holder enable quick changes and efficient processes. Top speed: Rapid feed speeds of 48 m/min on all axes minimize machining times. Technical data at a glance: Traverse paths: X 1,350 mm / Y 1,500 mm / Z 900 mm Rotary table diameter: 1,000 mm Max. table load: 2,000 kg Spindle power: 35 kW Spindle speed: up to 15,000 rpm Machine dimensions (LxWxH): 3,200 x 6,400 x 4,050 mm Weight: approx. 40 tons Additional advantages: Thanks to the latest control systems (Siemens or Heidenhain) and a robust machine concept, the IGREK FR 1000 T is suitable for both single-part and series production. The manufacturer offers international service and comprehensive warranties. Discover the IGREK FR 1000 T as your reliable partner for precise and efficient manufacturing – now available from stock. Contact us for more information!

Condition: good (used), These listed powered tools, VDI 50, are designed for a tool changer manufactured by SAUTER and are in good condition and fully functional. They were used on a CNC turning machine, GILDEMEISTER CTX 600. 6 x powered tools, straight design, manufactured by NACKE + WTO, VDI 50 for tool turret manufactured by SAUTER: Item No.: XVI 24275 1 Drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 545.00 plus applicable VAT. Item No.: XVI 24277 1 Drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 400.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Ijdsbql S Hspfx Afueih Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, functionality: fully functional, Single-toggle jaw crusher Feed opening: 1,000 x 200 mm with smooth crushing jaws optional: with electric motor and/or with steel subframe Isdpfxew U Thco Afueih