Pallet rack with storage shelves

unbekannt Feldbreite 2680 mm / 2 Felder / Höhe 3780 mm

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Standard Equipment: - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. Lsdjw I Uxcjpfx Aaljhd On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.

Condition: excellent (used), Year of construction: 2024, Sawblade tiltable 46 ° Length of the rolling table 3000 mm cutting width 13000 mm Motor output 7,5 kW Cutting height 204 mm Saw blade diameter 550 mm Speed 3000/4000/5000 U/min. Lhodpfox Ak Hwox Aalod weight of the machine ca. 1250 kg

Condition: new, ALTENDORF F 35 Type 1 - 1000 Panel Saw Robust, powerful, high cutting height – ideal for solid wood! - New machine - available immediately - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large protective hood Double roller carriage 3,200 mm Scoring unit preparation Rip fence, cutting width 1,000 mm Angle and mitre fence 3,450 mm, without longitudinal compensation Table extension/widening: powder-coated surface Saw blade tilt: 0 - 46° Carriage length: 3,200 mm Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade Ø: 450 mm Screen size: 15 inches Working table height: 910 mm Extraction port Ø: 80 + 120 mm Lodpfxjxtbtpo Aalshd Including options: M45102 Rip fence 1000 mm Digit_X M64300 Front support roller M99008 Template holder

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Ljdev Erkaopfx Aalohd Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: reconditioned (used), Year of construction: 2003, power: 5.5 kW (7.48 HP), cutting length (max.): 3,200 mm, cutting width at rip fence: 1,350 mm, Equipment: scorer, with scoring motor 0.73 kW, sliding table 3200 mm, mechanical parallel fence up to 1350 mm, power consumption 13.5A 400V 50Hz, max. saw blade diameter 400 mm, main motor 5.5 kW, extraction port 1x D=120 mm 1x D=80 mm, electric height adjustment, electric angle adjustment – as returned by customer Lhodpfxjwt A Eco Aaljd

Condition: used, Panel Saw Martin T 60 German quality product Heavy-duty precision panel saw 5.7" touchscreen axis positioning control Swiveling control panel above the table Saw blade tiltable 0 - 46° Motorized blade tilt and height adjustment Automatic scoring unit Motor 5.5 kW Saw blade diameter up to 400 mm Rip fence table length 3000 mm Cutting width with parallel fence 1250 mm Parallelogram cross table, tiltable to both sides up to 46°, LCD displays, 0.01° fine adjustment for cutting angle Width fence adjustment from the front using handwheel on precision guides Width fence reading via touchscreen Lsdpfjyuvqgox Aaljhd CE certified Machine is WORKSHOP TESTED and in TOP CONDITION Available ex-stock Lieboch

Condition: excellent (used), Panel – sliding table saw SCM class px 350i, cutting length 320 cm, tilt angle of unit 0–45 degrees, max. blade diameter 350 mm, max. cutting height 105 mm, max. cutting height at tilt 72 mm, cutting width on rear fences 1300 mm, Lhsdpeyf H Tgefx Aaljd motor 5.5 kW, saw blade speed – 4000 rpm, fixture for angle cutting, machine in very good condition, possibility to test prior to purchase.

Condition: good (used), From company liquidation: Paslode 6625/160 SQ strip nailer Nails from 100-160mm Ljdpfx Aastu U Hvjlehd 3.7-4.6mm thickness 7,1kg weight 72 nail magazine --ready for immediate use

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, Kingsland COMPACT 45 Hydraulic Steel WorkeR LxWxH 1160 x 590 x 1410mm (+100mm lifting eye) Die Height From Floor 940mm Shear Support From Floor 940mm Angle Support from Floor 1140mm Notch Height from Floor 940mm Punching Capacity 22dia x 15mm Shearing Capacity 200x 15mm Angle Cutting 100 x 10mm Section Cutting 30mm Round, 25mm Square Nitching 8mm Thickness Punch Pressure 45T Standard Size Fitment Punch & Die 18mm *For Sale with Jet Machinery Ltd* Jet Machinery Stock No: #78996 Machine Serial Number: 450 230 03 Lhsdpfxexawbio Aaled Cost: £5,750.00 + VAT

Condition: used, Year of construction: 2007, Carriage length: 5000 mm Cutting width at rip fence: 1050 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scorer: no Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: handwheel Saw blade angle display: digital readout Cutting height display: digital readout Rip fence display: scale Crosscut fence display: scale Lhedpfx Aeyvz N Soaled Saw blade diameter: 400 mm Speeds: 4000 / 4800 / 6000 rpm Motor power: 5.5 kW Extraction connection: 80 and 120 mm Machine length: 5500 mm Machine width: 1900 mm Weight: 1200 kg