Vise

UBK Maschinenschraubstock

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 750 kg, maximum load weight: 700 kg, Equipment: lighting, Suchen Sie nach einem gemütlichen Wochenendhaus, einem Büro im Garten oder einem zusätzlichen Raum für Ihre Familie? Unser einzigartiges Modell bietet die perfekte Lösung. Mit einem vierseitigen Dach und einer gehängten Metallfassade, die eine Lebensdauer von 30+ Jahren hat, bietet unser mobiles Haus höchste Qualität. Die hochwertige Aluminiumfenster sorgen für eine hervorragende Ästhetik und Funktionalität. Im Inneren erwartet Sie ein selbstnivellierender Holzboden, der mit Harz beschichtet ist, sowie ein Badezimmer mit Harz behandelten Holzplatten. Die Wände und Decken bestehen aus robusten Sperrholzplatten. Unser mobiles Haus verfügt über hochwertige Innentüren und modulares Beleuchtungssystem. Die Küche ist mit eingebauten Schränken und Geräten ausgestattet, während das Schlafzimmer über eingebaute Kleiderschränke verfügt. Das mobile Haus bietet hochwertige Schlüssel und Steckdosen sowie eine ausgezeichnete Boden- und Dachdämmung. Die Bodenisolierung ist aus Mineralwolle und beträgt 15 cm, die Dachisolierung 18 cm und die Außenwandisolierung 15 cm. Das Haus ist bereits für die Installation von Außenkameras, Klimaanlagen und Lüftungsanlagen vorbereitet. Es gibt Anschlüsse für eine Waschmaschine und Platz für einen Kühlschrank, eine eingebaute Fritteuse, einen Herd und einen Dunstabzug. Zahlreiche Steckdosen sind in der Küche, im Wohnzimmer, im Schlafzimmer und im Badezimmer vorhanden. Unser mobiles Haus bietet auch die Möglichkeit zur Installation von Photovoltaiksystemen auf dem Dach, um nachhaltige Energie zu nutzen. Lieferbar in 7-14 Tage! Kfodpfspxnpaox Aa Eoa Verpassen Sie nicht die Gelegenheit, Ihr Traumhaus zu finden! Kontaktieren Sie uns, um weitere Informationen zu erhalten und Ihre Bestellung aufzugeben.

Condition: used, Year of construction: 1970, x-travel:900 mm y-travel:250 mm Kfsdpfxscxxqro Aa Eja z-travel:370 mm table surface area:1525 x 325 mm total power requirement:9,85 kW weight of the machine ca.:3.1 t dimensions of the machine ca.:2,0 x 2,5 x 1,7 m

Year of construction: 2024, condition: new, The robust manual length stop MD 100 m enables you to efficiently increase the productivity and quality of your production. The operator can move the carriage to the desired position quickly and accurately. The specially developed clamping system gives the carriage a very high holding power. The length is measured using an easy-to-read tape measure with mm graduation. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • suitable for striking steel profiles and solid materials Kedpfx Ajidlpiea Esfa • Trolley with 3 ball bearings • smooth-running for quick and precise length positioning • Manual stop clamping via large adjustable hand knob • specially developed clamping system with very high holding power • raise and lower manual arm • Measuring rail with measuring tape and reading beacon (resolution 0.10 mm) • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.3 m • Left or right hand versions available • Mounting screws • Accesories: -Stop arm with spring damping -manual arm retraction via hand lever -Arm retraction with impact damping via pneumatic cylinder -various material roller conveyors

Condition: used, machine/vehicle number: 76271002, sheet width:2040 mm plate thickness:1,2 mm total power requirement:2,5 kW weight of the machine ca.:2,0 t Kfodpfx Ascxxq Esa Eea dimensions of the machine ca.:3,0 x 1,6 x 1,7 m

Condition: excellent (used), Year of construction: 2003, pressure: 13 bar, 1 fired steam boiler ----- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Kodsuugi Sopfx Aa Ejfa Heating surface approx. : 20 sqm Boiler capacity max. : 1.250 kg/h Operating overpressure : 13,0 bar increased test overpressure : 24.05 bar Water content at NW approx. : 993 l Water content full approx. : 1,365 l Year of construction : 2003 CE mark : 0036 equipped with Weishaupt gas burner type G7/1-D, ZMD-LN, 250-1,550 kW, 15-500 mbar, gas control system, switch cabinet, feed water pump and the existing coarse and fine fittings. Econmizer: Eco 3, 82 kw, 31 bar, 238°C, 28 ltr.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: SAPI Jumbo, pressure: 12 bar, total width: 3,087 mm, total height: 2,078 mm, total length: 3,692 mm, overall weight: 3,000 kg, inner dimension width: 2,340 mm, inner dimension length: 3,520 mm, inner dimension height: 2,500 mm, workpiece weight (max.): 500 kg, filter area: 20 m², Equipment: lighting, Efficient and Ready-to-Use JUMBO Blasting Cabin Kfsdpoukdfpefx Aa Eja This fully assembled, walk-in JUMBO blasting cabin provides a comprehensive solution for efficient blasting operations. Equipped with two LED blasting lights, it ensures optimal illumination of the workspace. The double-wing door allows easy access and handling of larger workpieces, while the blast-resistant rubber lining on the walls protects the interior from wear and extends the cabin’s lifespan. For air filtration and dust reduction, the cabin features a high-performance cartridge filter and an impact separator, ensuring a clean working environment. The flat conveyor system in the floor, covered with a grated surface, enables the automatic return transport of the blasting media, while the electric drive unit for the conveyor system guarantees smooth operation. Additionally, the cabin is equipped with a bucket elevator and a high-performance abrasive recycling unit, allowing for efficient processing and reuse of blasting media. The 38-liter pressure blasting pot provides sufficient capacity for extended blasting cycles. The package also includes a 10-meter-long blasting hose and a durable boron carbide nozzle, ensuring optimal blasting performance. Ideal for Professional Blasting Operations This blasting cabin is the perfect solution for businesses that require a reliable and efficient system for blasting work. ✔ Custom features, such as loading trolleys, are also available upon request. ✔ Compressed air, electrical supply, and installation must be provided on-site. If you are interested or have any questions, feel free to contact us at any time!

Condition: used, Year of construction: 2009, x-travel 1016 mm y-travel 660 mm z-travel 635 mm control Haas table surface area 1.372 x 610 mm table load 1.814 kg Kfjdpjwvl Acsfx Aa Eoa rapid traverse 18 m/min turning speed range 7.500 U/min power capacity - milling spindle 22,4 kW tool taper SK 50 | no. of tools in the magazine 30 Stück weight of the machine ca. 7,5 t dimensions 3,5 x 2,47 x 2,98 m Vertical Machining Center with 4th axis - chipconveyor - external handwheel - Dual tool change arm - internal coolant - filter - 4th axis, HRT 210 A - prepared for cableless 3D touch probe - oil dust collector - tool measuring

Condition: used, Year of construction: 1970, pressure:63 t Kfedpfocxxx Hsx Aa Eoa throat:250 mm stroke:8-100 mm table depth:710 mm table width:500 mm ram head dimension:450x280 mm ram adjustment:63 mm no. of strokes:140 Hub/min total power requirement:7 kW weight of the machine ca.:3,5 t

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller model: HASS, table width: 914 mm, table length: 2,134 mm, table load: 1,800 kg, overall weight: 11,340 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 7,500 rpm, coolant supply: 15 bar, distance table center to spindle nose: 864 mm, spindle motor power: 22 W, spindle nose: ISO 40, number of slots in tool magazine: 40, tool length: 406 mm, tool diameter: 63 mm, tool weight: 5,500 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​vertical machining center with HAAS CNC Kedpfxowrfame Aa Ejfa

Condition: used, Year of construction: 1966, max. tractive force 5 t, max. stroke 850 mm, max. cutting speed 12m/min, max. return speed: 25m/min, clamping surface 410x575 mm, groove width 3 - 90 mm, bore 13 - 500 mm, workpiece weight: 6000 kg, depth of machine base under floor 1.400 mm Ksdpfx Aascm Elns Eefa