High Lift stacker

Toyota SWE120L Elektro

Condition: used, functionality: fully functional, machine/vehicle number: 2488028, Year of construction: 2019, load capacity: 1,200 kg, lifting height: 4,150 mm, free lift: 166 mm, load center: 600 mm, fuel type: electric, power: 1.5 kW (2.04 HP), battery capacity: 225 Ah, battery voltage: 24 V, battery weight: 219 kg, fork carriage width: 674 mm, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 60 mm, ground clearance: 22 mm, turning radius (outer): 1,393 mm, front tire size: 230 x 70, rear tire size: 85 x 74, overall weight: 929 kg, total height: 3,720 mm, total length: 1,910 mm, total width: 770 mm, color: red, Equipment: pallet forks, Technical data - Year of manufacture: 2019 - Drive: Battery - Operation: Pedestrian - Load capacity: 1200 kg Gsdpfx Aoyqzkqsfksbn - Support arm lift capacity: 1600 kg - Lift height: 4.15 m - Height of mast extended: 4.60 m - Ground clearance: 150 mm - Load centre: 600 mm - Weight: 929 kg - Fork dimensions (L x W x D): 1.15 m x 0.18 m x 0.07 m - Overall dimensions (L x W x H): 1.91 m x 0.77 m x 2.14 m - Travel speed: 6.0 km/h - Max. gradeability with/without load: 9% / 12% - Lift speed with/without load: 0.12 m/s / 0.27 m/s - Fully functional, general signs of use

Condition: ready for operation (used), Year of construction: 1998, power: 37 kW (50.31 HP), pressing force: 250 t, stroke length: 150 mm, table width: 900 mm, table length: 1,000 mm, overall weight: 16,000 kg, Very nice and well maintained hydraulic press. 250 tons pressing force. Approximate dimensions: H: 380 cm. W: 200 cm. Gbedory Trpspfx Afksn L: 200 cm. Weight: 16,000 kg. Can be loaded by crane on collection against payment. Transportation can be arranged. Sold for customers. Location: DK-7600 Struer. Make an appointment for a demonstration.

Condition: used, functionality: fully functional, machine/vehicle number: 2488038, Year of construction: 2019, load capacity: 1,200 kg, lifting height: 4,150 mm, free lift: 166 mm, load center: 600 mm, fuel type: electric, power: 1.5 kW (2.04 HP), battery capacity: 225 Ah, battery voltage: 24 V, battery weight: 219 kg, fork carriage width: 674 mm, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 60 mm, ground clearance: 22 mm, turning radius (outer): 1,393 mm, front tire size: 230 x 70, rear tire size: 85 x 74, overall weight: 929 kg, total height: 3,720 mm, total length: 1,910 mm, total width: 770 mm, color: red, Equipment: pallet forks, Technical data - Year of manufacture: 2019 - Drive: Battery - Operation: Pedestrian - Load capacity: 1200 kg - Support arm lift capacity: 1600 kg - Lift height: 4.15 m Gbsdpfx Afsyqzbcekon - Height of mast extended: 4.60 m - Ground clearance: 150 mm - Load centre: 600 mm - Weight: 929 kg - Fork dimensions (L x W x D): 1.15 m x 0.18 m x 0.07 m - Overall dimensions (L x W x H): 1.91 m x 0.77 m x 2.14 m - Travel speed: 6.0 km/h - Max. gradeability with/without load: 9% / 12% - Lift speed with/without load: 0.12 m/s / 0.27 m/s - Fully functional, general signs of use

Condition: used, functionality: fully functional, machine/vehicle number: 6858894, Year of construction: 2019, operating hours: 698 h, load capacity: 2,000 kg, lifting height: 3,500 mm, fuel type: electric, mast type: simplex, construction height: 2,512 mm, fork length: 1,150 mm, drive type: Elektro, High lift truck Chassis number: 6858894 Mast type: Standard Condition: Reconditioned without warranty Technical condition: very good Gbodpfxou H Rn Rs Afkon Front tires type: Polyurethane Rear tires type: Polyurethane Battery Volt: 24V Description: The device is visually in a very good and technically in a very good condition. Charger on request. Fast and uncomplicated transport possible by arrangement! The advertisement only serves to identify the device! A detailed description of the condition and possible equipment will be provided individually on request! Subject to errors and prior sale, sale only to tradespeople. All used goods are sold without warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site. Reach-through protection Makrolon load rollers Tandem charger external

Condition: used, pressure 200 t distance between columns 1600 mm max. ram stroke 600 mm dayligth 900 mm table width 1600 mm Gbodpfxeg S R Two Afkjn table depth 1300 mm table height 1060 mm ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 rapid traverse 400 mm/s return speed 325 mm/s pressing speed 42 mm/s bei 40% mm/sec pressing speed 20 mm/s bei 100% mm/sec die-cushion pressure 800 kN die cushion stroke 150 mm speed of die cushion auf 68/ ab 225 mm/s

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Gsdpfottc Uaex Afkobn

Condition: used, Year of construction: 2010, gebraucht 2010 080065 prompt, Zwischenverkauf v Deutschland 29800 € 1 2040 mm 3 mm 2 mm 4.5 mm Motorisch 1.5 kW 1.1 kW 3060 mm 1650 mm 1500 mm 2730 kg 750 mm 140 mm 50 °/sek CNC control ECT (Schneider Magelis) - Input of bending angle, depth stop dimension, lifting height, folding, precut - max. 36 bending angles can be saved per set - max. 510 sets can be saved - comfortable 7.5" color touch TFT monitor - Power mode for material-friendly operation - Soft start of the bending beam and the depth stop - Visual user guidance in the event of faults (diagnosis center) - Selection of different languages ??such as German, English ... CNC back gauge - Back gauge range 6 - 750 mm - Drive via belt - 6 stop fingers - support plates with brushes Sectioned goose neck rail height 75 mm Additional 10 mm rail on the bening beam Flat rail R 1 mm Flat rail R 2 mm Mechanical drive via gear brake motor Upper beam drive via double eccentric Foot pedal Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE Gsdpfx Afewiri Aekebn We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Swivel bending machine KRAMER type A-Maut. II 1000 No. 48 287 Year of construction 1990 effective length 1060 mm max. sheet thickness 3.75 mm Stroke of upper beam 180 mm Adjustability of the folding beam 60 mm Backgauge 480 mm Drive power of folding beam drive 4 kW Drive power upper beam drive 1.5 kW Mains connection 400 Volt, 50 Hz Godpfsfnabyox Afksbn - Manual and semi-automatic control - Angle adjustment via angle preselection disk - one-piece pointing rail 135° - backgauge with hand crank adjustment and simple measuring scale - Continuous fence rail - Electric foot switch, 3-position Space requirement L x W x H 2200 x 1350 x 1500 mm Weight approx. 2.3 tons good condition

Condition: used, Year of construction: 1992, functionality: fully functional, pressing force: 250 t, stroke length: 400 mm, table width: 1,250 mm, table length: 1,150 mm, die cushion stroke: 150 mm, installation height: 700 mm, Hydraulic double column press DUNKES HDS 250/10 Year of construction 1992 Technical data: Pressing force at 260 bar: 250 tons Rapid lowering speed: 365 mm/s Table clamping area approx.: 1150 x 1250 mm Ram clamping area approx.: 1150 x 1250 mm Die cushion area approx.: 800 x 1000 mm Die cushion pressing force (200 bar): 100t Die cushion stroke: 150mm Power requirement: 45 kw Installation height: 700 mm Gbjdpfsup Si Hjx Afksn ram stroke: 400 mm Conversion of the control system to SIEMENS (in 2005) Machine height approx. 5,400 mm TP language currently Polish

Year of construction: 1976, condition: used, pressure 250 t distance between columns 900 mm stroke 300 mm table surface area 850x900 mm ram surface 800x880 mm stroke 300 mm table height 1050 mm Gbjdjlp U A Sjpfx Afksn