TIMESAVERS 41-SERIE-900-WW

TIMESAVERS 41-SERIE-900-WW

Condition: used, Year of construction: 2007, Used deburring machine FLADDER AUT-1000 VAC incl. vacuum pump and filter system Technical data: Year of manufacture: 2007 Chsdezy Uvkjpfx Ap Djd Manufacturer: FLADDER Model: AUT-1000 VAC incl. vacuum pump and filter system Currently equipped with: - new brush set - complete maintenance incl. replacement of all oils - vacuum pump inspected and serviced The machine is powered and can be inspected by appointment! Working width: 1000 mm Long infeed and outfeed Fully functional with extraction system Belt and vacuum table were replaced 3 years ago The machine has only been used for less than one shift No known defects Connections: 3x 400V / 50Hz / 50 A

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Codsh S H Rrspfx Ap Dehd Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2026, turning diameter: 360 mm, turning length: 750 mm, quill diameter: 52 mm, Equipment: rotational speed infinitely variable, – Distance between centres 750 mm – Swing over bed 360 mm – Swing over tailstock 240 mm – Spindle bore 52 mm – Longitudinal and cross feed – Digital readout on two axes – Coolant system – Lighting – Protective cover – Fixed chuck – Live chuck – Three-jaw chuck – Four-jaw chuck – Emergency stop – Documentation Chjdpfoyzuwtjx Ap Djd – 400 V

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 14,295 mm, total height: 3,105 mm, total width: 3,260 mm, warranty duration: 24 months, workpiece weight (max.): 1,500 kg, power: 52 kW (70.70 HP), input voltage: 380 V, temperature: 250 °C, heating capacity: 48 kW (65.26 HP), inner dimension length: 4,200 mm, inner dimension width: 1,500 mm, inner dimension height: 1,800 mm, air demand: 6,000 m³/h, workpiece height (max.): 1,700 mm, workpiece length (max.): 4,100 mm, volume flow: 8,000 m³/h, filter area: 77 m², energy consumption: 70 kWh, insulation material: Steinwolle, insulation thickness: 150 mm, sheet thickness steel (max.): 3 mm, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately according to delivery address. Please contact us for an individual freight quote. ✅ Complete package for professional powder coating ✅ Brand-new, unused industrial products ✅ Proton Maschinenbau GmbH is the exclusive authorized distributor for Matech products in Europe ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after receipt of payment 📦 Please also enquire about current stock availability. 🔥 PROMOTION VALID UNTIL 06.06.2026 ONLY 🔥 Package list price (net): €40,730.00 Promotional discount: 25% = €10,182.50 ➖➖➖➖➖ ⭐ Powder Coating System – MINIPBMAT-7-L LARGE COMPLETE PACKAGE FOR PROFESSIONAL POWDER COATING! With the MINIPBMAT-7-L, you receive a powerful turnkey system consisting of an electric powder oven, 7-filter L-version powder booth, and a multi-color powder coating gun set. This package is ideal for larger and longer workpieces as well as businesses seeking a high-performance manual powder coating solution. ☘️ Large ☘️ Powerful ☘️ Professional ✅ Complete package with 3 machines ✅ Powder oven + powder booth + powder spray gun ✅ Promotional price only until 06.06.2026 ✅ 7-filter booth with extremely high extraction capacity ✅ Very well suited for longer workpieces ✅ Attractive package with 25% promotional discount Cedpfsrgq Epex Ap Dshd ➖➖➖➖➖ Package contents: ✔️ 1 x Matech Electric Powder Oven MATOVENB-151842 ✔️ 1 x Matech Powder Booth MATBOOTH.FT.07-L ✔️ 1 x STR-ELITE Multicolor Powder Coating Gun Set ➖➖➖➖➖ Technical Highlights: ♨️ MATOVENB-151842 Electric Powder Oven ✔️ Electric heating output: 48 kW ✔️ Total power: approx. 52 kW ±10% ✔️ Digital temperature control up to 220°C ✔️ Blower capacity: 6,000 m³/h ✔️ For longer workpieces and larger production areas 🎨 MATBOOTH.FT.07-L Powder Booth ✔️ 7 polyester filters ✔️ Extraction performance: 8,000 m³/h ✔️ 2 x 5.5 kW extraction fans ✔️ L-version with generous working area ✔️ Ideal for workpieces from approx. 4 m in length 🔫 STR-ELITE Multicolor Gun Set ✔️ Multicolor configuration ✔️ AOS Automatic Optimization System ✔️ 4-mode memory option ✔️ Powder coating output: max. 450 g/min ➖➖➖➖➖ ⚙️ Optional upgrades available 🎨 Options for Matech powder booths: ✅ Nano-filter box – enables operation without fixed exhaust ducting ✅ Booth base with sieve powder recovery system ♨️ Options for Matech powder ovens: ✅ PID controller for precise temperature regulation ✅ Touchscreen control panel and smartphone operation ✅ Ramp-heating mode for controlled temperature profiles ✅ Process parameter storage ✅ Weekly & monthly reports at the press of a button ✅ Insert shelf system or workpiece trolley ✅ Overhead rail system for the oven ✅ ATEX version of the oven available on request ✅ Double-door/front & rear door options ✅ Carriage/trolley for the rail system ✅ Support legs for rail system ✅ Custom dimensions on request Rails and supports are not included in the price. ➖➖➖➖➖ 🚀 Secure your promotional package now! This offer is valid until 06.06.2026. After this date, regular package prices apply. ✳️ We offer various financing solutions. Please contact us for leasing, hire-purchase, or installment payment options. Enquire now – make your business ready for professional powder coating!

Condition: new, Year of construction: 2026, max. working width: 1350 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Grinding belt dimensions: 1910 x 1350 mm Sand rolling brush size: 300 x 400 mm Sandbelt line speed: 12 m / s Number of roller-brush planetary revolution shaft heads: 8 pcs. Rolling bruh rotation speed: 8-26 m / s Cjdpfx Apjygx A Ne Dshd Rolling brush public speed: 1-15 rpm machine thickness servo adjustment precision: 0,01 mm Length: 3800 mm Width: 2300 mm Height: 2400 mm Machine weight: 5500 kg Electrical connected load: 49,5 kW Standard configuration Machine configuration:1st station: Sanding belt2nd station: Brush elements Main components:PLC: SiemensTouchscreen: SiemensLow-voltage devices: SchneiderFrequency converter: SchneiderSuction fan: Elektror, Germany Total connected load:Sanding belt motor: 15 kWBrush motor: 11 kWInfeed belt motor: 4 kWVacuum suction motor: 15 kWFrequency converter for rotating brushes: 15 kW Extended machine accessories Optional feeding mode:1. Feeding with strong permanent magnet adsorption transport (suitable for steel workpieces. Workpiece size ≥ 30 mm × 30 mm)2. Feeding with vacuum negative pressure adsorption transport (suitable for stainless steel plates, copper plates, aluminum plates, etc.) that cannot be magnetically adsorbed. Workpiece size ≥ 50 mm × 50 mm)

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Chjdpfx Apsh S H R Se Ded Cooling Mode: WATER COOLING

Condition: excellent (used), Timesavers Series 12-600-WW Passage width 600mm Station 1: Grinding belt, pre-grinding, removes laser spatter and raised burrs. Station 2: Grinding belt/scotch belt, final grinding, surface finishing. The Series 12-600-WW is ideally suited for deburring and finish grinding sheet metal up to 100mm thick. The two grinding belt stations provide a uniform, clean finish on the surface of your sheet metal. Cedpfx Apoznltio Dehd

Condition: new, Year of construction: 2024, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Price includes shipping within Germany – No additional transport costs! ✈️ Fast delivery: Only 6 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN THIS EASY! Looking to expand your business and enter the world of professional powder coating? The PEF2.5+ is the perfect solution for beginners! This high-performance system allows efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! ✨UNBEATABLE PROMOTION – ONLY UNTIL THE END OF MAY!✨ Take advantage of this limited-time offer before it's too late! PONY Luxury Coating – QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✅ 100% European manufacturing – No China products, only top quality built to European standards! ✅ Modular & expandable – Additional options for greater performance and flexibility! ✅ All spare parts included – Long-term use with no hidden extra costs! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today. ✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ Powder oven + powder booth + powder gun Codowfhu Hepfx Ap Djhd Complete Starter Package PEF2.5+ ⭐ Powder oven with electric heating ✔️ INTERNAL WIDTH: 1,505mm ✔️ HEIGHT: 1,800mm (from air duct) ✔️ INTERNAL LENGTH: 2,500mm ✔️ Thermoblock unit dimensions: 785x1800x2210mm; heating capacity is 30 kW/h; recirculation fan is 1.5kW/h – 1 pc.; exhaust fan is 0.54kW/h. ✔️ Double-wing door with thermal insulation and silicone seal. ✔️ Guide rails for rack trolleys are manufactured according to the dimensions specified on the base plates. ✔️ Specially designed air duct for homogeneous air distribution inside the curing oven. ✔️ Electrical panel materials by Siemens and Schneider. This curing oven does not include a PLC system. PLC is available as an option. ✔️ Curing temperature, curing time, and heater unit function are adjustable. At the end of the program, an alarm and light signal from the buzzer will indicate completion. ✔️ Additionally, a product transport trolley with cast wheels is located inside the oven. ⭐ Powder coating booth ✔️ Dimensions: 800x1930x2200mm (including fan) ✔️ Teflon filters: 4 pcs. ➢ Filter suction fan: 4kW x 1 pc. (6,000m3/h – 200mmSS) ✔️ 36W LED lighting x 1 pc. ✔️ Bottom drawer x 1 pc. ✔️ Control panel for air intake and powder spray regulation ✔️ DELTA frequency converter ✔️ Heavy-duty rollers under the coating booth ✔️ Additional filter at the fan outlet ⭐ Powder coating gun E-Coat+3 Master with Multicolor (vibration table) Enquire now – Get your business ready for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️All our machines are CE-certified and necessary machines have ATEX certificates.☀️

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need fior additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Codpfxohwrhme Ap Dshd Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, travel distance X-axis: 6,000 mm, positioning speed: 100 m/min, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, total length: 6,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, fume extraction, nozzle changer, safety light barrier, 3 Chuck Professional pipe laser cutting machine (GS-6022HG) Working area (L/W): 6000mm*φ220mm Repeat positioning accuracy: ≤0.03mm Max. positioning speed: 100m/min Max. acceleration: 1.0G Max. rotating speed of chuck: 110r/min Machine weight: 10T Round pipe: Φ15mm-Φ220mm Square pipe: 15mm*15mm ~ 150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flat oval tube: Short axis≥15mm, long axis≤210mm Channel steel: Max 20# I-beam: Max 18# H steel: Max 175*90mm Csdovrwt Topfx Ap Djhd Supports high-precision cutting of round tubes, square tubes and special-shaped tubes. Flexibly adapts to different specifications of tubes.