Terminal tractor

Terberg RT 223

Condition: good (used), machine/vehicle number: 2929, Year of construction: 2011, load capacity: 35,000 kg, total length: 5,390 mm, total width: 2,700 mm, additional equipment features: Rear mud guards, Dual tread, Front mud guards, Equipment: lighting, Terberg RT223 from Uniktruck Ffedpoul Dngofx Ag Dow

Condition: used, Technical details: spindle diameter: 130 mm drill depth: 1380 mm x-travel: 2500 mm y-travel: 1600 mm z-travel: 380 mm w-axis: 900 Bohrspindelvorschub mm U-axis: 320 Planschiebervorschub mm control: auf Wunsch tool taper: ISO SK50 revolution per minute: Planschieber:4,5-180 U/min rpm - drive spindle: 4,5-900 U/min Fjdpfx Agovr S Ulj Dofw feed:: x/y: 5-2000 total power requirement: ca. 40 kW weight of the machine ca.: ca.< 35 + AZusatzeinrichtungen t The machine can be offered in 4 different sales options. Please choose! 1. the machine is in mint mechanical condition. As is/is. 2. the machine as is/is incl. plate field 4000x2000x300mm = stock no. 1101081 3. the machine is newly wired, with new electrical cabinet, digital display, with 4-axis, AC drives from Siemens, axis motors from Siemens (50A/31Nm) with 12 months warranty on all new parts. 4. further additional equipment can be offered as an option. Such as coolant system, chip conveyor, enclosure etc. We should discuss this on the table with your technical staff. i.D. *

Condition: used, mileage: 333,333 km, power: 180 kW (244.73 HP), first registration: 11/2016, fuel type: diesel, empty load weight: 11,720 kg, overall weight: 18,000 kg, tire size: 315/60 R 22.5, axle configuration: 4x4, color: blue, gearing type: automatic, suspension: steel-air, total length: 5,750 mm, operating hours: 20,114 h, Equipment: ABS, air conditioning, all wheel drive, cabin, sliding door, Interior trim, street-legal, drum brake, steering axle, sprung front axle, sprung cab, reversing alarm, seat heating, radio/MP3, radio/CD, heated exterior mirrors, speed limiter, Mercedes OM936LA engine (Euromot 4), incl. engine brake, ZF 6WG211 transmission with torque converter lockup clutch (6 forward / 3 reverse gears), steering axle Kessler type LT61PL 375 (ratio 9.76:1) with simplex wedge-type drum brakes and parabolic leaf suspension, rear axle Kessler type D81PL478 (ratio 9.76:1) with drum brake, air-suspended, steering full-hydrostatic orbitrol system with priority valve, left-hand drive position with swivel seat function, roof window, integrated ballast in vehicle front, additional connection for 2-line brake system, 2 x Duomatic connection, NATO jump-start socket (24 V), ABS cable and socket (ISO 7638/4091) 1 x at end carrier, 1 x behind cab, 15-pin socket (DIN 12098) 1 x at end carrier, 1 x behind cab, operating hours: 20,114 h, mileage estimated!! Fedpfxsx U Ruhj Ag Dsfw

Condition: used, Year of construction: 2013, operating hours: 22,407 h, power: 175 kW (237.93 HP), motor manufacturer: Mercedes, gearing type: automatic, Machine type: RoRo terminal tractor Please contact Theo Lelie for more information Fjdpfjv D Ekksx Ag Djfw

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, table load: 12,000 kg, spindle diameter: 130 mm, spindle speed (max.): 1,000 rpm, table length: 1,800 mm, table width: 1,600 mm, Heidenheim TNC 355 Ffsdpoyf Uc Aofx Ag Dow

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,000 mm, table load: 15,000 kg, spindle diameter: 150 mm, spindle speed (min.): 4 rpm, spindle speed (max.): 3,000 rpm, table length: 2,000 mm, table width: 1,800 mm, drill spindle length: 900 mm, HEIDENHEIN iTNC 530. ATC 60, Ffjdpfx Aov U D Nteg Dsw X= 4.000 mm. Y= 3.000 mm. W, Tower= 2.000 mm. Z, Spindle= 900 mm. Rotary Table 1.800 x 2.300 mm, 15 Ton.

Condition: new, maximum load weight: 50,400 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment specifications available on request. GOOSENECK * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX on the front connector strip with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized finish * 1 removable aluminum tailgate, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood floor above gooseneck, checker plate floor above king pin * 2-inch king pin * Rear section of gooseneck prepared for aluminum drive-on ramps Fsdpfxstx Nwns Ag Defw * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in the loading platform and bevel for accommodating excavator dipper stick approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st axle steerable, all remaining axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lockout, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with raise and lower valve * Tires: 235/75 R 17.5, twin tires, 3PMSF * Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load approx. 50,000 kg * Continuous 50 mm thick hardwood floor on the loading platform and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable (galvanized) side extensions, approx. 230 mm per side (without wooden planks) * Wheel recesses with square climbing strips, approx. 15 x 15 mm ahead of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for wheel recesses, usable as bridging elements for extension OR as widening planks * Aluminum elements lockable on telescopic tubes of the extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel recesses with square climbing strips, approx. 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening planks * Aluminum elements lockable on the extension’s telescopic tubes * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-section steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm in length and approx. 900 mm wide each * Hydraulically foldable ramp tips * Ramps can be shifted hydraulically approx. 235 mm outward and approx. 215 mm inward individually * Super Grip rubber surface approx. 25 mm and steel plate surface approx. 5 mm as additional

Condition: used, Year of construction: 1973, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm total power requirement 4,5 kW weight of the machine ca. 30 t Spindle Ø 130 mm Spindle taper SK 50 Ffedpot Hwt Sofx Ag Dow Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features * HEIDENHAIN Digital Display for 3 axes. * Hardened guideways. * Ball screw spindles. * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. * Moving operating platform. * Hanging control panel. * Manual operating control. * Platform. * Hydrostatics in the column displacement. * Mounting plate 3,200 x 2,500 mm, planed, with t-slots. * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled. * Hydraulic clamping of column and slides. * Motor driven tool clamp. * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories. This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.

Condition: ready for operation (used), functionality: fully functional, cutting height (max.): 1,200 mm, cutting width (max.): 1,100 mm, Danobat CP 1211T Large Capacity Bandsaw Cutting Capacity Dia / Square 1100mm Cutting capacity rectangle 1200mm wide x 1100mm high Ffsdpfx Astv Nadjg Dsw Fully automatic

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, overall weight: 17,500 kg, working width: 1,300 mm, working height: 1,300 mm, working range: 1,300 mm, Amada H1300 Horizontal Bandsaw (1982) Capacity 1300 x 1300mm Power 230 V – 50/60 hz / 400 v – 50hz / 460 v 60hz Blade drive 11 kw Hydraulic drive 3.7 kw Ffjdjtv E Hcopfx Ag Dsw Coolant drive 0.4 kw Wire brush drive 0.4 kw Blade size 11380mm x thickness 1.6 x width 65 mm Net weight 17.500 kgs Total power requirement 16 kw Machine Data: Model H1300 Year of Construction 1982 Built in Japan