Heavy-duty casters, 4 pieces

Tente Rad-Durchmesser 200 x 80 mm

Condition: like new (used), Year of construction: 2012, operating hours: 500 h, functionality: fully functional, overall weight: 1,500 kg, fuel type: diesel, color: black, output current: 228 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 120 kW (163.15 HP), nominal power (apparent): 150 kVA, total length: 2,550 mm, total width: 1,110 mm, total height: 1,500 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: John Deere, type of cooling: water, Brand: SDMO Model: J165 Year of manufacture: 2012 Serial number: On request Operating hours (indicated): Low hours Capacity (kVA): 150 - 174 (60Hz) Capacity (kW): 120 - 139 (60Hz) Engine brand: John Deere Engine model: 6068HF120 Fuel: Diesel Alternator brand: Leroy Somer Alternator model: LSA44.2M95J 6/4 Voltage: 230-400V Frequency (Hz): 50 - 60 RPM: 1500 - 1800 (60Hz) Amperes (A): 228 Dimensions LxWxH (mm): 2550 x 1110 x 1500 Weight (kg) approx.: 1500 Units in stock: 1 Iedpfxjydk D To Am Isia Made in: France Comments: Low hours, ex-emergency set, in good working condition.

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Iiedpot N Antefx Am Ioa Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025.

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Mot. tank-boiler turning device with rail trolley Technical data: - Total payload driven + travelling unit 40000 kg. - payload per vessel device 20000 kg - workpiece diameter approx. 500 - 3500 mm - Centre distance of the support rollers adjustable via trapezoidal thread spindle - roller diameter 500 mm - roller width 150 mm - driven unit with drive on both sides - infinitely variable rotational speed - manual remote control for Re- and Li.-run - drive 400 V - Both units are mounted on rail trolleys - space requirement with running unit approx. W 3800 x H 1150 x D 1350 mm Iijdpfx Amehcnhme Ija - Space requirement with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight attached unit approx. 2500 kg - Weight with running unit approx. 1800 kg

Condition: used, Steel construction for crane system Width: approx. 8,5 m Iedpfxobruzgo Am Ioia Length: approx. 7,95 m Plant dismantled The plant is sold "as is". Viewing: You are cordially invited to view the item - simply contact us and arrange an appointment at short notice. Attention: no guarantee, no exchange, no return possible.

Condition: new, welding current max. 300 A open-circuit voltage 55 - 76 V connected load frequency 400 V Iiedpfxsu Aw Sho Am Isa weight 75 kg Dimensions (LxWxH) 950 x 560 x 880 mm Inert gas welding machine: - with pulse function - 300 amps - 400 volts - hose package 3m. - ground cable - Wire feed rolls for 0.8 - 0.9 - 1.0 - 1.2 - 2.5 - 3.2 - 4.0 and 5.0mm

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P5-0174, working width: 530 mm, type of input current: AC, input voltage: 400 V, overall weight: 175 kg, space requirement height: 1,097 mm, space requirement length: 1,100 mm, space requirement width: 710 mm, input current: 15 A, table width: 1,070 mm, input frequency: 50 Hz, empty load weight: 105 kg, Equipment: safety light barrier, Double Loop closing machine for books and calendars. Adjustable sizes for all diameter rings up to 25 mm Isdpfxjrzuluj Am Isia Footswitch controlled. Light beam safety guard. Power requirements: 380-415 v 50/60 Hz

Year of construction: 1988, condition: good (used), machine/vehicle number: D 206089, OFFER 15106 Technical data: - Total payload driven + travelling unit 60000 kg. - Payload per container device 30000 kg - workpiece diameter 500 - 4000 mm - Centre distance of the support rollers mot. adjustable - roller diameter 500 mm Iedpfjhcwzaox Am Ioia - roller width 470 mm - infinitely variable rotation speed 100 - 1500 mm/min - torque 5132 Nm - manual remote control for Re- and Li.-run - drive 400 V - Both units are mounted on guide rails and can be manually - can be moved manually in parallel - Space requirement for attached unit approx. W 2800 x H 1200 x D 1600 mm - Space requirement with running unit approx. W 2800 x H 1200 x D 1200 mm - Weight attached unit approx. 4800 kg - Weight with running unit approx. 3800 kg

Condition: used, Year of construction: 2004, total length: 6,240 mm, Tugger Rofan TPR-10 Drive Diesel Year built 2004 Isdpoxyalkjfx Am Ieia

Condition: as good as new (ex-display), Fronius TPS 3200 ✅ Scope of delivery: ➤Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and a coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose assembly. These features cost approximately €400 more from Fronius. ➤Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most useful feed case – the wire is safely stored in the enclosed case. Iodpfx Amswbilxj Ioia ➤Fronius long intermediate hose package – each device is delivered with a 5-meter-long connecting hose package between the power source and the wire feed case for greater flexibility and better handling. Take the wire feed case with you to places that are difficult to reach! The connecting hose assembly is neatly attached to a hook on the side of the device. (Hooks are manufactured by us.) ➤ Large Fronius trolley – Arguably the best trolley with a gas cylinder holder on the market. ➤ Binzel hose assembly – With up/down amperage adjustment on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket spool adapter for large wire spools This device can weld almost all materials, including aluminum, steel, and stainless steel (V2A). It features feeler wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options are available for an additional charge. e.g., Fronius Job Master hose package (display on the torch) + EUR 500.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We can also be reached via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the devices? To explain, we buy like-new used devices, disassemble them, check everything, replace any wear parts if necessary, and only then, after a successful test weld, are they released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we buy from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know anything about.

Condition: good (used), Sturdy crane system, ideal for glass storage or workshop, Load capacity: 3t, Length: 14250 mm, width: 8500 mm, Iisdpfxjryv S Ae Am Isa height: 3650 mm Max. hook height: 3280 mm, Max. Overall height: 3950 mm.