Saacke TEMINOX GLS 125-45 dual-fuel burner 10500kw, Weishaupt RGL70

Saacke TEMINOX GLS 125-45 Zweistoffbrenner 10500kw,Weishaupt RGL70 Saacke TEMINOX GLS 125-45 Zweistoffbrenner 10500kw,Weishaupt RGL70

Condition: good (used), Year of construction: 2011, functionality: fully functional, Industrial steam boiler Brand Loos Bosch Group Model U-ND 800 Serial number 109582 Year of construction 10/2011 Total capacity: 1108 liters Steam output 800 kg per hour with Weishaupt GmbH burner Fpedpev I E Tgsfx Andji Burner type WM - L10/3-A Year of construction 2011 Minimum: 250 kW Maximum: 800 kW Steam boiler dimensions: 2500 mm x 1600 mm x 1900 mm, Storage tank Achenbach GmbH Capacity: 800 liters Dimensions: 1600 mm x 850 mm x 2600 mm Control cabinet Dimensions: 1000 mm x 180 mm x 750 mm. Burner after major renovation in 2024.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, input voltage: 400 V, open-circuit voltage: 87 V, welding current at 60% duty cycle: 270 A, welding current at 100% duty cycle: 220 A, input current: 25 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 300 A, input frequency: 60 Hz, We are offering this as-new EWM Tetrix XQ 300 puls AC/DC Expert 3.0 5POL welding machine, year of manufacture 2023. Including Cool XQ 41-1 cooling module Mains voltage: 380–400 V Mains frequency: 50/60 Hz Rated current I1,max: 24.9 A Rated current I1,eff: 15.5 A Open-circuit voltage (U0): 87 V MIG/MAG welding current range: 3–300 A MIG/MAG welding voltage: 10.1–22.0 V MIG/MAG duty cycle 40%: 300 A MIG/MAG voltage at 40% duty cycle: 22.0 V MIG/MAG duty cycle 60%: 270 A MIG/MAG voltage at 60% duty cycle: 20.8 V MIG/MAG duty cycle 100%: 220 A MIG/MAG voltage at 100% duty cycle: 18.8 V Manual arc welding current range: 5–300 A Manual arc welding voltage: 20.2–32.0 V Manual arc welding duty cycle 30%: 300 A Manual arc welding voltage at 30% duty cycle: 32.0 V Manual arc welding duty cycle 60%: 260 A Fpodpfxsy Sxkfe Andji Manual arc welding voltage at 60% duty cycle: 30.4 V Manual arc welding duty cycle 100%: 210 A Manual arc welding voltage at 100% duty cycle: 28.4 V Protection class: IP23 Year of manufacture: 2023 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: like new (used), Manufacturer: Varian Type: NHS-35 Condition: The pump is in very good condition and can also be supplied with a corner valve if required. Warranty: 3 months Fpodohmba Ajpfx Andji Delivery time: In stock

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Fsdpfx Anjhcnhmjdepi Motorized tank/boiler turning device with rail-mounted chassis Technical data: - Total load capacity, driven + follower unit: 40,000 kg - Load capacity per tank/boiler turning device: 20,000 kg - Workpiece diameter: approx. 500 - 3,500 mm - Axle distance of the support rollers adjustable via trapezoidal screw spindle - Roller diameter: 500 mm - Roller width: 150 mm - Driven unit with drive on both sides - Continuously adjustable rotational speed - Handheld remote control for forward and reverse rotation - Drive: 400 V - Both units are mounted on rail-mounted chassis - Space requirement, driven unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Space requirement, follower unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight, driven unit: approx. 2,500 kg - Weight, follower unit: approx. 1,800 kg

Year of construction: 2025, condition: as good as new (ex-display), Air-cooled process chiller: refrigerant R32 Fpsdpfsf H A Eyjx Andji Cooling capacity 72 kW at 7/12°C, internal P3 pump, internal 410-liter tank, winter package for ambient temperatures down to -25°C for outdoor installation, includes speed-controlled fans. Large Dixell display with protective cover.

Condition: used, Year of construction: 2024, functionality: fully functional, Corrugated line 5 ply. Fully renewd 2024, 1650mm width. Steam matic, boiler steam producing 2500 kg/h. Max pressure 19 bar. Speed up to 70 metr per min. 1.⁠ ⁠Total Length: 55 metr 2.⁠ ⁠Total Power: 150 kw 3.⁠ ⁠Frame with shaft 4.⁠ ⁠Corrugated paperboard marching: diameter of corrugated rouer, electric adjust speed moter used. Fpsdpsw R Sknsfx Andji 5.⁠ ⁠Double cylinder gum mounting marchine: On the adoption, inside two layers draw the gun, dascend to carry the paper lead the paper roller. Machine exists units: Hydraulic shaftless mill roll stands, Spindle ¢ 240mm, hyperbolic heavy rocker, expand chuck , multi-point brake, hydraulic drive lifting, panning left and right on the middle. Top paper preheat cylinders and core paper preheat cylinders. Both preheat 360 degress area. Single Facer Double Facer Blade scorer NC helical knife Glue system Gas system Steam system producing 2500 kg/h. Max pressure 19 bar. Working 12 bar. Top paper index 100g/㎡--180g/㎡ Ring crush index（N.m/g）≥8 (Water containing8-10%) Core paper index 80g/㎡--160g/㎡ Ring crush index（N.m/g）≥5.5 (Water containing8-10%) In paper index 90g/㎡--160g/㎡ Ring crush index（N.m/g）≥6 (Water containing8-10%)

Condition: new, Year of construction: 2025, Bending machine ZB 70/2 M Fpjdot Hwfnjpfx Andji - with foot pedal - with standard roller set - two driven shafts - mecanical adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - adjusting way: 120 mm - weight: 400 kg - dimensions: 900x600x1100 mm

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Fpsdpfet Akt Rox Andji Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Condition: used, Plant: Used decanter / centrifuge Manufacturer: Flottweg Model: Solid bowl centrifuge Type: Z73-4/454 Machine No.: 010.014.04 Year of construction: 1999 Drum: max. speed. 2800 min-1 Fjdjppa Tcjpfx Andopi Perm. sediment density: 1,3 kg/dm3

Condition: used, Year of construction: 2016, Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) Seals on lifting cylinders and filling valves renewed 2023 Vacuum and relief valves fitted with new seals and springs 2023 Bottle unpacker | Joha | - 1982 Packing head for 24 bottles in modular crate  Bottle washer | Silmo | Praktika | 1983 Bottles per row: 12  Label discharger Labeler | Krones | Vinetta | 1999 Type 480-6-3-180      Labelling station for back labels Labelling station for breast labels and neck loops  Three glue pallets and gripper sponges each Glue pallets, gripper sponges and sponge roller at bottle discharge new 2023  Glue pump Krones Unipump-H with glue heater  Packer | Pexco | - | - 1 head for 24 bottles in module box 2016 new electrics installed and machine overhauled  Residual liquid and finish control | Miho | LC2000 | Residual liquid detection from bottle cleaning machine  Control of bottle mouth for crown cork/metal Incl. balancing screen from Silmo for visual control of the cleaned bottles Crate washer | Fleischer | - | -  For cleaning of plastic empty crates, in longitudinal run Module size: 300x400mm  Overhauled in 2016 Compressor | Alup | Allegro 19-10 | 2016  Oil-free 4897 operating hours  Transport Bottle transport: various conveyor belts + 90° bends  Crate transport/ roller conveyor: 2016 overhauled with stainless steel cheeks and feet Fjdpsl Hx Rpefx Andjpi