Sweeper scrubber
Tennant M30

Name: Tennant M30
Brand: Tennant
Availability: InStock

Condition

Used

Location

Nederland

Show map

Machine data

Machine type:: Sweeper scrubber

Manufacturer:: Tennant

Model:: M30

Condition:: used

Operating hours:: 2,572 h

Price & Location

Location:: Nederland

Call

Details about the offer

Listing ID:: A12197435

Reference number:: 253649

Update:: 16.07.2025

Description

The Tennant M30 increases productivity by delivering exceptional sweeping and scrubbing performance and also improves health and safety.

Easy to operate and maintain, it quickly improves the image of your facility by cleaning in a single motion (wet or dry). It also cleans three times longer on one water tank using Tennant's innovative ec-H20 technology that uses up to 70% less water.

This Tennant M30 comes standard with:

- Complete service,

- New battery pack,

- Free on-site delivery,

- New wear parts and rubbers,

- Service and overhaul,

- Explanation and instruction,

- Cleaning agents,

- Brushes and accessories tailored to your floor.

Bjdpfenyiv Nsx Afnjwh
Other specifications:

- Type: Sweeper-Scrubber,

- Condition: Occasion,

- Brand: Tennant,

- Model: M30,

- Sit up or walk behind: Sit down,

- Theoretical capacity: 15,860 m²/h,

- Side brush diameter: 53 cm,

- Scrubbing width: 157 cm,

- Mopping width: 150 cm,

- Number of brushes (scrub): 2,

- Brush type: Cylindrical,

- Scrub brush diameter: 30.5 x 122 cm,

- Brush pressure (scrub): 193 kg,

- Dumpster capacity: 198 liters,

- Clean water tank capacity: 284 liters,

- Dirty water tank capacity: 360 liters,

- Power source: Battery 36V,

- Dirt tank emptying: High discharge system,

- Maximum dumping height: 152 cm,

- Filter area: 7.3 m²,

- Filter type: Panel filter,

- Maximum speed: 13 km/h,

- Maximum slope angle: 10%,

- Drive: rear wheel,

- Filter shaker: Electric,

- Weight (excl. batteries): 1,815 kg,

- Weight (incl. batteries): 2,449 kg,

- Dimensions (LxWxH): 274 x 162 x 147 cm,

- Stock: In stock,

- Working hours: 2,572 hours,

In addition, you can contact Metech for all machine maintenance and reorder cleaning supplies. In addition to this used Tennant M30, we also have new sweeper-scrubbers and used machines available. View our sweeper-scrubbers for more information.
Would you like to know more about this Tennant M30? Contact us, we are pleased to tell you all about it.

The listing was translated automatically. Translation errors are possible.

Seller

Last online: A week ago

Registered since: 2020

97 listings online

Call

Send inquiry

Telephone & Fax

+31 342 2... show

These listings may also fit your interest.

Listing

Cnc turning and milling center DMG Gildemeister SPRINT 65 Linear

Uden

959 km

Cnc turning and milling center
DMG GildemeisterSPRINT 65 Linear

€27,500

FCA ONO plus VAT

Call

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Bwsdpfx Afsur Hfzsnjh Fanuc 310is controller

See details

Listing

Horizontal machining centre Niigata SPN 501-P8

Cuggiono

1,509 km

Horizontal machining centre
NiigataSPN 501-P8

Call

Listing

Turningroll, roller bed, rotator 100t A&N Pr 100-150

Kreuztal

1,141 km

Turningroll, roller bed, rotator 100t
A&NPr 100-150

Call

Listing

Cylindrical grinding machine KELLENBERGER KEL-VARIA UR 175/1000

Bienne

1,301 km

Cylindrical grinding machine
KELLENBERGERKEL-VARIA UR 175/1000

Call

Condition: good (used), Year of construction: 1999, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: 650341, Year 1999 with Fanuc 18 TB – 3 axes XZB Marposs E30/E20 Country of manufacture: Switzerland Voltage: 400V/50Hz/3ph Dimensions: 410 x 220 x 190 cm Net machine weight: 5,000 kg TECHNICAL SPECIFICATIONS CNC control: Fanuc 18TB Bwjdpfx Afow T Tb Hensh Intermediate Section Fixed intermediate section: grinding head R Swiveling section with manual indexing 2.5°: R / RS / UR / URS -210° to +30° Swiveling section with automatic indexing 2.5°: R / RS / UR / URS -210° to +30° B axis, resolution 0.1'': R / RS / UR / URS -210° to +30° Standard workhead Swivel range: -10° to (+100°) Spindle speed (continuous): 6 – 600 rpm Internal taper: MT5 Reducing sleeve: MT5/MT4 Short external taper fitting: DIN 55026 / Size 5 Permissible torque: 160 Nm Guaranteed roundness for chuck work Standard: 0.5 µm Option: 0.2 µm Workpiece weight between centers: 150 kg Tailstock Taper fitting: MT4 Quill stroke: 50 mm / 2° Option: fine adjustment with correction (Ø +/- 150 µm) Grinding wheel data (max. speed) Diameter 300: 27 m/s Diameter 400: 35 m/s Diameter 500: 45 m/s UR Grinding Head Power: 9.2 kW / 12.5 HP Wheel mounting, left max.: Ø 500 x 80 mm Right, additional max.: Ø 400 x 63 mm Internal grinding device: spindle HJN 828 Lower table (Z axis) Distance between centers: 1000 mm Max. travel: 1150 mm Max. speed: 15 m/min Max. resolution: 0.1 µm Upper table Distance between centers: 1000 mm / swivel 0° to 9° Grinding carriage (X axis) Max. travel: 320 mm Max. speed: 7.5 m/min Max. resolution: 0.1 µm Pneumatics Min. connection: 6 bar Air consumption: approx. 0.6 m³/h Coolant Max. connection pressure: 3 bar Required space (version 1000): 3600 x 2000 mm Unless otherwise stated, technical data is provided without engagement and may be subject to errors or omissions.

See details

Listing

Mastic asphalt mixer TICAB Crack Sealer BPM-500 (without trailer)

Rzeszów

2,105 km

Mastic asphalt mixer
TICABCrack Sealer BPM-500 (without trailer)

Call

Condition: new, functionality: fully functional, Year of construction: 2025, Available in stock Capacity – 500 l. Diesel engine. Bwjdpfx Aed Swd Uofneh Self-Propelled. Diesel Burner. Engine fuel tank – 50 l. Oil tank – 30 l. Thermal oil heater – 80 l. Electrically heated hose – 6 m. Heating the mastic through the thermal oil (thermal oil jacket).

See details

Listing

Bühl

1,259 km

CNC Lathe
EMCOMAXXTURN 45

Call

Condition: used, Year of construction: 2007, turning diameter 300 mm swing over bed 430 mm swing diameter over slide rest 300 mm Bjdpfjwx R Rkox Afnewh control SIEMENS, SINUMERIK 840 D travel -x axis 160 mm travel -z axis 510 mm Part length max. 480 mm main spindle bore 53 mm main spindle speed 0 - 7000 U/min spindle head DIN 55026 A2-5 max. torque on the spindle 100 Nm main spindle drive 15 kW sub spindle bore 53 mm sub spindle speed 0 - 7000 U/min spindle head DIN 55026 A2-5 max. torque on the spindle 100 Nm sub spindle drive 15 kW C-axis resolution 0,001 ° C-axis rapid feed 1000 U/min tool turret 1 x 12 Stat. number of driven tool stations 1 x 12 tool shaft (cylinder shaft DIN 69880) VDI 25 speed of driven tools 0 - 8000 U/min max. torque 16 Nm output 4 kW feed power X/Z axis 4000 / 6000 N rapid traverse X-axis 24 m/min rapid traverse Z-axis 30 m/min total power requirement 38 kVA weight of the machine ca. 4 t dimensions of machine L x W x H 2,65 x 1,84 x 2,32 m Accessories: collet fixture 173 E on main spindle, collet fixture 163 E on sub spindle, bar loading magazine make FMB, model turbo 3-36/3200 A, YOM 2018, for bar dia. up to 36 mm and bar length up to 3200 mm, various toolholders for turret (no driven toolholders), coolant

See details

Listing

CNC turning and milling center Cnc lathe Hyundai WIA L200Y

Alblasserdam

889 km

CNC turning and milling center
Cnc lathe Hyundai WIAL200Y

Call

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: G3169-0110, turning length: 530 mm, turning diameter: 420 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, overall weight: 4,700 kg, turning diameter over bed slide: 800 mm, HYUNDAI WIA L200SY CNC TURNING CENTER Year: 2012 | Fanuc 18i-TB CNC Control SN: G3169-0110 • 5-Axis CNC Turning Center – Hyundai WIA L200SY • Main Chuck: 8″ | Sub Spindle: 5″ • Live Tooling & Y-Axis + C-Axis indexing • Max Turning Diameter: approx. 419–420 mm / 16.5″ • Max Turning Length: approx. 520–530 mm / ~20.5–20.9″ • Swing Over Bed: approx. 800 mm / 31.5″ • X Travel: approx. 220 mm / 8.7″ Bwodpfx Asx I A Hcjfnsh • Z Travel: approx. 550 mm / 21.7″ • Y Travel: approx. 80 mm / 3.1″ • Max Spindle Speed: up to 4,000 rpm • Main Spindle Power: ~20 HP (~15 kW) • Sub Spindle Speed up to 6,000 rpm • C-Axis indexing: 0.001° possible • Tool Stations: approx. 12 • Coolant system and chip conveyor included • Approx. Dimensions: 120″ × 68″ × 80″ • Approx. Weight: ~10,500 lbs (~4,760 kg) NOTE: MACHINE WAS REMOVED FROM GOOD WORKING CONDITION 2 YEARS AGO. PLANNED TO PUT BACK IN SERVICE BUT SELLER WILL NO LONGER BE DOING MACHINING.

See details

Listing

Lontzen

1,021 km

CNC lathe
HWACHEONHI-TECH 450 BL YMC

Call

Condition: excellent (used), Year of construction: 2017, Max. turning length: 1,214 mm Max. turning diameter: 420 mm Chuck size: 305 mm Max. swing over bed: 700 mm Travel distances - X-axis: 280 mm - Y-axis: 120 mm - Z-axis: 1,390 mm Rapid traverse - Rapid traverse X/Y/Z: 20 / 10 / 24 m/min Spindle - Bar capacity: 89 mm - Max. speed: 2,500 rpm - Drive power: 22 / 18.5 kW - Torque: 1,050 / 883.8 Nm Turret - Tool stations: 12 - Driven tool stations: 12 - Tool holder: BMT-65 Accessories: • Box ways • C-axis • Y-axis Bwodew Tcvmjpfx Afnjh • Air blow gun • Steady rest base • Manual steady rest, manufacturer RICHTER • Chip conveyor • Automatic tailstock and quill • Work light • Coolant tank capacity: 240 liters Connected load: 55 kVA Weight: approx. 7,800 kg

See details

Listing

Germany

1,199 km

Cold Rolling Machine
EXCELLOXK 875

Call

Listing

CNC turning and milling center DOOSAN Puma TT2100SYY

Oak Forest

5,799 km

CNC turning and milling center
DOOSANPuma TT2100SYY

Call

Condition: excellent (used), Year of construction: 2019, Doosan Puma TT2100SYY Mfd. 2019 Tooled as pictured Specifications SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Bwjdpfx Afow Dvnxenoh Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING 2 machines available

See details

Advertise here

Sweeper scrubberTennant M30

Machine data

Price & Location

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

Sweeper scrubber
Tennant M30