External / internal cylindrical grinding machine

Studer S30

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm Nwjdpfx Aew T Sd Tea Ejr TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, turning diameter: 500 mm, DMG CTX Beta 1250 TC 2009 Nedpfsv N Hc Sjx Aa Ejwr

Condition: refurbished (used), Completely overhauled Studer cylindrical grinding machine Centre distance: 650 mm Nwodjxxy A Tepfx Aa Eor Technical data and accessories as per photos and PDF.

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Main dimensions Center height: 125 mm Center width: 400 / 700 / 1025 mm Nsdpfx Ajvca Izea Eowr Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Cross slide Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.

Year of construction: 2023, condition: new, - modern ergonomic design - manual test with analogue Measuring Clock (Reading accuracy 0.2 HR) - easy to use and quick test process - Height Capacity approx. 185mm - Hepth Capacity approx. 160mm - Dimensions 545x182x755mm Test loads: 60 / 100 / 150kg Nwedpfx Aaspbbc He Eor Test method: HRA/HRB/HRC Standard delivery: - Hardness tester - V-Anvil - Flat Anvil Ø150mm - Flat Anvil Ø50mm - Ball Indenter 1/16" with ball - Diamond indenter 120° Rockwell - Spindle protection - Accessory case

Condition: used, Year of construction: 1987, grinding diameter 350 mm grinding length 650 mm Nwjdpfxjmmmtfs Aa Esr centre height 175 mm Despite being in excellent condition, it was dismantled down to the base, cleaned, sealing and wear parts replaced, upper table reground and geometry restored to new machine tolerance. - 7072 operating hours - Retrofitted in 2013 with a cooling lubricant belt filter system, capacity 300 L, manufacturer Knoll. - Including machine accessories, e.g. holders, flanges, collet chuck set, etc. - paper cooling unit from 2014 like new because nearly unused

Condition: used, Rondslijper centre height 125 mm centre width 650 mm grinding diameter 250 mm grinding wheel diameter 400 mm total power requirement 8 kw weight approx. 2500 kg Dit is een machine van Machines4you Nodpfx Aaegfqn No Ejwr

Condition: excellent (used), Year of construction: 2007, Machining center - vertical Manufacturer: Hyundai KIA Nedpeiw Ekdofx Aa Eswr Modell: VX380TD Year of c.: 2007 Control unit: Fanuc Series 01-MC Spindle speed range: 12000 rpm Power consumption: 7 kva Type of tool holder: BT30 Slots in storage: 20 X-Axis movement: 500 mm Y-Axis movement: 350 mm Z-Axis movement: 350 mm Weight: 5000 kg

Condition: used, Year of construction: 1988, grinding length: 1,000 mm, grinding diameter: 350 mm, The machine was still in use until recently. Grinding diameter: 350mm Grinding length: 1000mm Year of manufacture: 1988 Remarks: - The price does NOT include any accessories! - Pickup by buyer, from the site. - Pickup date will be agreed upon by the seller. - No warranty. Nwsdpfxowca H Aj Aa Esr - Advance payment (invoice) or cash upon pickup.

Condition: used, Year of construction: 1988, Swivel-in internal grinding attachment for STUDER RHU and S 30 universal cylindrical grinding machines with oil mist lubrication up to 50,000 rpm. Nwodpfxocdi N Is Aa Eer Excellent condition!

Year of construction: 2001, condition: used, Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014. Nedpfx Ajdwf Dbja Eowr

Condition: used, CNC cylindrical grinding machine STUDER S31 CNC LeanPro with "Pictogramming" Distance between centers: 1000mm Center heigh 175mm Grinding Wheel head rotation (B) 360° (1°) 2 ext Grinding Wheels 1 int Grinding Wheel Ext Grinding wheel 400 mm x 40 mm x 127 mm overhauled spindle > see photos Workhead CM 4 0-1000 RPM Njdpfswim U Hex Aa Eewr CNC Fanuc Programming: Pictogramming Heidenhain linear encoders This machine can be inspected under power in our warehouse in Gussago BS Italy

Condition: good (used), Year of construction: 1981, operating hours: 16,769 h, Center height 175 , Center width 700 , Angled position of turntable 10° , Workhead swiveling 90° , Speed range 30-675 rpm , Morse 5 , Grinding headstock _ grinding wheel diameter 400 , largest width 50 , drive power 6,25kW Nwsdpfx Aastz T H De Eor

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 300 kg, total width: 1,260 mm, total length: 1,500 mm, Universal dynamic balancing machine for rotors from 3 - 300kg. CAB803 measuring system, class C protection, CE mark Nwjdpou Nmppsfx Aa Ejr