Cylindrical Grinding Machine

STUDER S 25

Condition: used, TECHNICAL DETAILS - distance between centers : 200 [mm] - centers height : 100 [mm] - strokes (X/Z) : 130 / 170 [mm] WHEELHEAD - grinding wheels dimensions : 400 x 63 x 127 [mm] - peripheral speed : 45 [m/sec] - power : 3 [kW] - positioned at : 30 [°] WORKPIECEHEAD - type of cone: MT4 - speeds : 600 - 3000 [rpm] - power : 0,5 [kW] - C axis indexing precision : +/- 0,5 [°] TAILSTOCK - type of cone : CM2 - quill stroke : 30 [mm] ELECTRICAL SUPPLY - voltage : 400 [V] - frequency : 50 [Hz] - installed power : 19 [kVA] DIMENSIONS - floor space : 1760 x 2180 [mm] - height : 2630 [mm] - weight : 4.000 [kg] HOURS - under power : 46.943 [h] - working hours : 21.529 [h] EQUIPMENT - CNC FANUC 16TB - soft options : Studer Release B, Pictogramming - interface : RS232C - electronic deported handwheel - direct measuring rules on axes X/Z - tailstock with fine concentricity adjustment - tailstock pinole hydraulic recoil - swiveling dressing wheel upon table : FISCHER AES-72x230/3 - dynamic wheel balancing device : DITTEL HBA 4000 - prepared for diameter sensor : MOVOMATIC ES400 - prepared for parts loading/unloading robot : FELSOMAT - automatic front door - prepared for cooling - electrostatic aspiration : ELOSTA BF2000 - pneumatic collets chuck - 1 wheel-holder Dcodpfx Afeuhbxmjnjc - 1 grinding wheel - support arm for zero gravity wheel change - 1 balancing shaft

Year of construction: 1991, condition: good (used), machine/vehicle number: 07282, Offer 22336 Technical data: - max. working width 3030 mm Djdemdqllspfx Afnecc - max. sheet thickness without bending 4 mm - max. sheet thickness with bending 3 mm - 3 driven rolls - roll diameter top / bottom 205 / 185 mm - working speed m/min - drive - brake motor 400 V / 7,5 kW - space requirement approx. W 5500 x D 1400 x H 1300 mm - weight approx. 4,7 t - with - bending - Rear roller inclinable, - hinged bearing for swinging out the top roller - extended roller ends for mounting of profile rollers - right + left rotation - separate control panel

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, center height: 175 mm, type of input current: three-phase, spindle speed (max.): 1,500 rpm, spindle speed (min.): 1 rpm, feed length X-axis: 285 mm, feed length Z-axis: 800 mm, overall weight: 4,000 kg, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, input voltage: 400 V, CNC Cylindrical grinder STUDER S33 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2008 CNC control: FANUC 21i-TB Software installed: StuderGrind Centre distance: 650 [mm] Height of centers: 175 Stroke X axis: 285 [mm] Min. Stroke speed X axis: 0.001 [mm/min] Max. Stroke speed X axis: 5000 [mm/min] Resolution X axis: 0.0001 [mm] Stroke Z axis: 800 [mm] Min. Stroke speed Z axis: 0.001 [mm/min] Max. Stroke speed Z axis: 10000 [mm/min] Resolution Z axis: 0.0001 [mm] B axis swivelling stroke: -15 [°] / +195 [°] B axis indexing precision: Hirth 1 [°] Workpiece spindle nose: MT5 Workpiece spindle min. speed: 1 [rpm] Workpiece spindle max. speed: 1500 [rpm] Max. part weight in part holder headstock between centres: 80 [Kg] Type of attachment tailstock: MT3 Tailstock quill stroke: 35 [mm] Tailstock quill diameter: 50 [mm] Tailstock fine adjustment: +/- 40 [mm] Dcodpfx Afjxywhpenjc Supply voltage: 400 [V] Total power required: 20 [kVA] Weight: 4000 [Kg] INCLUDED EQUIPMENT: x1 internal grinding spindle type 102560B – speed: 60,000 [rpm] x1 hydraulic swiveling dressing attachment x1 fixed dressing unit mounted on the table x1 rotating wheel dressing unit (electrical) x1 3-jaw chuck Ø170 [mm] - MT5 x1 4-jaw chuck Ø170 [mm] - MT5 x1 magnetic chuck Ø170 [mm] - MT5 x1 2-point steady rest x1 pneumatic tailstock lift x1 pneumatic upper-table lift x1 longitudinal slide with rotary table - swiveling up to 8.5 [°] x1 automatic B-axis turret wheelhead – Hirth gearing 1 [°] x1 C-axis for thread and form grinding x1 workpiece probe MOVOMATIC C25 x1 contact control device DITTEL SENSITRON 6 x1 semi-automatic wheel balancing device MPM type BMT100M x1 paper filtration unit ARO TECHNOLOGIES type 5491.246A01 x1 mist extraction unit AIR-FRESH SERVICE type FMN-V12 x1 foot pedal x1 electrical cabinet air conditioner x4 external grinding wheel flanges x1 set of lifting equipment x1 axis bracket (for transportation of the machine) x1 set of operating manuals (French, English, and German) More information upon request.

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Dsdpew T Sd Tofx Afnecc Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: ready for operation (used), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible. Dodpfx Afouqacksnecc

Condition: excellent (used), Year of construction: 2016, travel distance X-axis: 2,400 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 810 mm, CNC HEIDENHAIN iTNC 530 X/Y/Z 2,400/1,500/810 mm retrofitted 4th axis 12,000 min-1, 40 kVA, , traverse paths weight 7.800 kg Dodpfx Ajq Rcu Eefnocc Table with vacuum plate with BORNEMANN 960 suction unit

Condition: excellent (used), Year of construction: 2018, Tornos Multiswiss 6x32 Year of manufacture: 2018 Dcodpfxswf I Rzs Afnsc Operating hours: 14,100 hours Including various accessories

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: Dedpfsrz Nflex Afnecc - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: used, Year of construction: 2004, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm number of spindle speeds: 63 - 3.150 1/min feed stepless: 12-3000 / 6-1500 (Z) mm/min quill stroke: 100 mm Djdpek Hdu Dsfx Afnocc milling-head swivable +/-: 90° spindle taper ISO: SK 40 surface area: 630 x 400 mm total power requirement: 8 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2 x 1,9 x 1,95 m universal milling machine with point to point control, mechanical handwheels, swivel - rotary table (mech.) +-45°, hydr. tool clamping, half cabin, coolant device, manuals (German language) *

Condition: used, Year of construction: 2018, travel -x axis 1.050 mm travel -y axis 570 mm travel -z axis 510 mm control HEIDENHAIN - TNC620 number of spindle speeds 12.000 U/min tool taper BT 40 table dimension (L x W) 1300 x 570 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in a well-maintained condition and has exclusively worked on Aluminum and Plastics. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Dsdpfew Dgcasx Afnocc #Tags: DNM5700 | DNM-5700