VS-22974 Diesel triplex forklift truck Still RX70-50

STILL RX70-50

Condition: used, Year of construction: 2013, operating hours: 8,413 h, lifting height: 3,500 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Still RX70-35 diesel forklift, year of manufacture: 2013, operating hours: only 8,413h! Previous owner: German Armed Forces. Rated lifting capacity: 3,500kg. Lifting height: 3,500mm. Duplex mast. Twin tyres on front axle. Fork length: 2,400mm. Hydraulic sideshift. Full cabin. Diesel engine: [30kW/41hp]. Weight: 5,034kg. Good condition! Immediately operational! Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. ...) will be happy to assist you. Further information available on our website. Subject to prior sale and errors excepted. Cabin = Further information = Lifting capacity: 3,500kg Fodpfxez Nu A Is Aivogh Overall height: 250 cm For further details please contact Tobias Ebert.

Condition: excellent (used), Year of construction: 2020, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, total width: 5,800 mm, total height: 4,500 mm, total length: 13,500 mm, table length: 10,000 mm, table width: 1,250 mm, Travelling Column High performance, precision and machining power Linear guiding of RAM combined with Hydrostatic Guiding HDS ACD2 Milling head with 5000 Rpm and 1400 Nm torq Aitek ATC chain 60 position with L=400 and 250 diameter x 35 Kg Fgedpfeyr Dmdox Aiveh Filtration with IKZ 15 Bar Chip conveyor BLUM 3D Measuring probe Wide bed linear guided in X-Travel W=930 mm Rotary table driver prepared in E-Cabinet X-Axis: 8000mm Y-Axis: 1300mm Z-Axis: 2500mm Table Length: 10000mm Table Width: 1250mm Power on spindle: 40kW Spindle speeds: 5000Rpm Spindle Taper: 40ISO/Bt/Mk Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Millinghead auto-index:0.001 x 0.001 Gr° Working hours: 3800H Length: 13500mm Width: 5800mm Height: 4500mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2014, operating hours: 1,986 h, lifting height: 3,500 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Cabin = More information = Fsdsz Nuzkjpfx Aivegh Lifting capacity: 3,500 kg Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2013, operating hours: 9,214 h, lifting height: 3,500 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Still RX70-35 diesel forklift, year of manufacture: 2013, operating hours: only 9,214h, previous owner: German Armed Forces, rated capacity: 3,500kg, lift height: 3,500mm, duplex mast, dual tires on front axle, fork length: 2,400mm, hydraulic sideshift, full cabin, diesel engine: [30kW/41hp], weight: 4,666kg, good condition, immediately ready for use! Leasing or financing offers available upon request. Mr. Mihm will be happy to assist you by phone. Further details can be found on our homepage. Errors and prior sale excepted. Fgsdpsz Nuzdsfx Aivjh Cabin, rental possible = Further information = Load capacity: 3,500 kg Please contact Tobias Ebert for more information.

Condition: good (used), Year of construction: 2008, turning length: 12,000 mm, spindle motor power: 60,000 W, total height: 3,800 mm, total length: 23,000 mm, total width: 7,600 mm, swing diameter over cross slide: 1,520 mm, turning diameter over bed slide: 1,140 mm, workpiece weight (max.): 20,000 kg, overall weight: 58,000 kg, Equipment: documentation/manual, CNC Lathe Giuseppe Giana - GGH 1100/760 x 12.000 CNC MACH-ID 9439 Make: Giuseppe Giana Type: GGH 1100/760 x 12.000 CNC Control: Siemens 840 D-SL Year: 2008 3 bed way construction Bed width 1100 mm 3 x C-Type Steady rest on lower base with in feed Fgedpeyl Uh Sefx Aivjh 2 x Fixed steady rest 300 - 800 mm with 5 ton 2 x Chip conveyor 4 Chuck 1000 mm Barafuldi 4 way turret head Swing over bed Ø: 1520mm Swing over cross slide Ø:1140mm DBC Turning Length: 12000mm Spindle bore: 155mm Spindle power: 60kW Bed width: 1100mm Tailstock spindle Ø: 310Ø Stroke pinole: 300mm Spindle taper: 1:4 taperMk Workpiece weight: 20000 Power: 80A Speeds / ranges: 0-800Rpm Feed rate X-Axis: 0-8000mm/min. Feed rate Z-Axis: 0-8000mm/min. Length: 23000mm Width: 7600mm Height: 3800mm Weight: 58000kg

Condition: used, Year of construction: 2013, operating hours: 1,165 h, lifting height: 3,500 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Still RX70-35 Diesel Forklift, Year of manufacture: 2013, Operating hours: only 1,165h! Previous owner: Bundeswehr (German Armed Forces), Rated lifting capacity: 3,500 kg, Lifting height: 3,500 mm, Duplex mast, hydraulic sideshift, rotator, 3rd hydraulic function, full cabin, diesel engine [30kW/41HP], fork length: 1,800 mm, weight: 4,921 kg, immediately available for operation! Fgodjz Nuy Tepfx Aivjh On request, we can provide you with a leasing or financing offer. Mr. Mihm (phone) will be happy to assist you. Further information available on our website. Subject to error and prior sale! Additional features: - Power steering - Cabin = Further Information = Lifting capacity: 3,500 kg Overall height: 250 cm Contact Tobias Ebert for further information.

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 7,153 h, load capacity: 5,000 kg, lifting height: 5,080 mm, fuel type: diesel, mast type: triplex, power: 55 kW (74.78 HP), gearing type: automatic, total height: 2,470 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, cabin, lighting, sideshift, trailer coupling, Diesel forklift STILL RX70-50 Year of manufacture: 2016 According to the hour meter: 7,153 hours 5-ton lifting capacity Fodpoz Hmruefx Aivogh 2.47-meter overall height 5.08-meter lifting height 55 kW Deutz engine - Triplex free-lift mast - Side shifter - Fork adjustment - Full cabin with heater - Lighting system - Ready for immediate use - Original paint Selling price: €12,900 net Affordable delivery also possible!

Condition: used, Technical details: turning diameter over bed: 830 mm turning dia. over face-slide: 540 mm turning length: 3000 mm turning diameter over support: 540 mm centre distance: 3000 mm faceplate diameter: 800 mm Rapid feed X axis: 4 m/min. control: MTC K (Monforts) range of revolution per miute: 2 -1.600 U/min spindle passage: 88 mm tailstock taper ISO: MK6 tailstock quill stroke: 200 mm max. workpiece weight between centers: 1250 kg max. workpiece weight -without tailstock: 3000 kg Fodpfx Aowmlkneivegh turning dia. in gap: 1.200 mm length of gap: 310 mm Weight approx.: ca. 6.85 (ohne Späneförderer und Kühlmittelbehälter) t dimension machine xH: 2,55 x 1,1 x 1,29 m Cycle lathe Machine overhauled in 2010 Operation via control panel Thread cutting by calculation Interpolator of NC control Chip conveyor manufacturer Cable drag Three-jaw chuck D=500mm without clamping jaws Various accessories *

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 3,040 h, load capacity: 5,000 kg, lifting height: 3,680 mm, fuel type: diesel, mast type: telescopic, construction height: 2,680 mm, fork carriage width: 1,300 mm, fork length: 2,100 mm, empty load weight: 7,243 kg, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 355/50-15 Rear tire type: Superelastic Rear tire size: 250-15 Fjdpfjzmzt Aex Aivsgh Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop-tested and FEM4.004 certified. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. We also purchase your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing options are available upon request at favorable terms. We will be happy to provide you with competent and detailed advice on our vehicles. Side shifter, 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, full cabin, interior mirror, joystick, rotating beacon, windshield wiper, single-pedal control, LED, seat.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,110 h, load capacity: 5,000 kg, lifting height: 4,330 mm, free lift: 1,320 mm, fuel type: diesel, mast type: triplex, construction height: 2,350 mm, fork carriage width: 1,300 mm, empty load weight: 7,644 kg, total length: 3,100 mm, drive type: Diesel, construction width: 1,500 mm, Diesel forklift Load center: 600 ISO class: FEM 3 A Mast type: Triplex Transmission: Electric drive, AC Technical condition: good Fodez Hnwropfx Aivegh Front tire type: Superelastic Front tire size: 2 x 355/50-15 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 2 x 250-15 Rear tire condition: 60 - 80% Battery year of manufacture: 2019 Double auxiliary hydraulics, cabin with heater, blue spot light, 2 front work lights, 2 rear work lights

Condition: used, Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 25,000 kg, wheel width: 3,000 mm, feed length X-axis: 1,000 mm, LIEBHERR L3002 CNC Internal and External Gear Hobber Built 1982, Modernized 2006 CNC SIEMENS 840 D. Max Wheel diameter 3,000 mm. Fgjdpfswdmy Eox Aivjh Max helical angle 45° Internal and external Head. 44/50 kW.

Condition: used, Year of construction: 2022, load capacity: 5,000 kg, lifting height: 7,270 mm, total length: 5,670 mm, - Tragfähigkeit: 4999 kg - Lastschwerpunkt: 500 mm - Lastabstand 540 mm - Achslast mit Last vorn 10468 kg - Achslast ohne Last vorn/hinten 2956/3635 kg - Reifengröße vorn: 355/45-15 - Reifengröße hinten: 250-15 - Räder Anzahl vorn/hinten: 2x/2 - Spurweite: vorn Einfachreifen 1210 mm - Spurweite: vorn Doppelreifen 1364 mm - Spurweite hinten 1120 mm - Neigung Hubgerüst/Gabelträger, vor/zurück 3/7 Grad Fgsdpfx Aiozttaujvjh - Sitzhöhe: 1298 mm - Kupplungshöhe: 496 mm - Gabelträger: Kategorie 3 / Forma A - Arbeitsgangbreite bei Palette 1000 x 1200 quer: 4470 mm - Arbeitsgangbreite bei Palette 800 x 1200 längs: 4670 mm - Wenderadius: 2730 mm - Kleinster Drehpunktabstand: 746 mm - Fahrgeschwindigkeit mit/ohne Last 20/20 km/h - Hubgeschwindigkeit mit/ohne Last min. Lüfterdrehzahl 0,50/0,53 m/s - Senkgeschwindigkeit mit/ohne Last 0,50/0,50 m/s - Steigfähigkeit mit/ohne Last />30 % - Betriebsbremse mechanisch - Motorhersteller/Typ Deutz/TCD 2,9 L4 - Nenndrehzahl: 2200 1/min - Max. Drehmoment 260 Nm - Anzahl Zylinder/Hubraum 4/2900 cm³ - Arbeitsdruck für Anbaugeräte 250 bar - Ölmenge für Anbaugeräte 30 l/min - Anhängekupplung Bolzen

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 10,208 h, load capacity: 5,000 kg, lifting height: 2,780 mm, fuel type: gas, mast type: telescopic, construction height: 2,250 mm, motor manufacturer: VW, gearing type: other, fork length: 150,602,400 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 355/50-15, rear tire type: superelastic tires (black), rear tire size: 250-15, overall weight: 7,135 kg, total height: 2,250 mm, total length: 3,200 mm, total width: 1,550 mm, fuel: liquid petroleum gas (LPG), motor model: CHT, Equipment: sideshift, STILL RX 70-50 T-600 /2018 – LPG forklifts TECHNICAL DATA Lifting capacity: 5.000 kg Lifting height: 2.780 mm Closed height: 2.250 mm Mast: Standard (2W278) Fork length: 150.602.400 mm Fork carriage: 3A Drive: 4-Zyl. Treibgas Engine: VW CHT Transmission: elektrisch Fedpfoz Ap S Sox Aivogh Tyres: Superelastik SE 355/50-15 (80%) / 250-15 (60%) Service weight: 7.135 kg Length: 3.200 mm Width: 1.550 mm Year of manufacture: 2018 Operating hours: 10.208 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen ATTACHMENTS Sideshift Rental truck – Rental price on request. Internal no.: 1201898 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, machine/vehicle number: 15355, Year of construction: 2008, operating hours: 15,561 h, load capacity: 12,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: simplex, construction height: 4,280 mm, Equipment: cabin, .: 15355 Device details: Year of manufacture: 2008 Load capacity: 12,000 kg Lifting height: 5,500 mm Read operating hours: 15,561 h Mast type: Standard Mast height: 4,280 mm Length/Width/Height: 4,600 / 2,500 / 3,000 mm Operating weight: 15,820 kg ---- Equipment: * Protective roof * 3rd valve * 4th valve * Full cabin * Heating * Front work lights * Rear work lights Fjdpfstw Dfwsx Aivegh ---- Further device information: Without fork carrier Rotating beacon Radio Single pedal ---- Operating hours are generally displayed hours. We are happy to offer you suitable transport. A further 250 - 300 forklifts, attachments, and sweepers are immediately available for you. Of course, also for rent! We are happy to buy your OLD one. Do you have questions? During our business hours from 7:30 a.m. to 4:00 p.m., you can reach us. We look forward to hearing from you! We speak English Interim sale and errors for this offer are expressly reserved. In dealer business, the device is sold as-is, not refurbished. All information provided without guarantee, errors and changes reserved.

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 3,881 h, load capacity: 5,000 kg, lifting height: 4,630 mm, free lift: 1,590 mm, fuel type: diesel, mast type: triplex, construction height: 2,350 mm, drive type: Diesel, Diesel forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Description: Camera, Side shifter, Fgedpfx Aszz D Hhjivsh 3rd valve, heater, full cabin, dual tires.