Electric 4-wheel forklift

Still RX60-20

Condition: used, operating hours: 1,907 h, lifting height: 4,600 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Still RX20-14 electric forklift, year of manufacture: 2014, hours: only 1,907h!, previous owner: German Armed Forces, rated capacity: 1,400 kg, lifting height: 4,600 mm, triplex mast, hydraulic sideshift, engine: [9 kW/12 hp], weight: 2,237 kg, very good condition! Ready for immediate use! Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. For further information, please visit our website. Errors and prior sale excepted! Cabin, rental possible. = Further information = Pjdpoy Ttmqsfx Akisrc Year of manufacture: 2014 Lifting capacity: 1,400 kg Contact Tobias Ebert for more information.

Condition: repair required (used), Fehlmann Picomax 60 M (5-axis universal milling machine) with Heidenhain TNC 426 x-axis 500 mm y-axis 350 mm z-axis 610 mm Motor spindle 18,000 rpm Power 10.2 kW 24-position tool changer Pjdpfx Akswmwrdoisrc Weight 3,200 kg with 4 axes SK 30 tools approx. 40 tool holders The machine has the following problems: - Heidenhain 430 control system is defective (booting up is not always possible, crashes during machining)

Condition: used, Year of construction: 2014, operating hours: 2,438 h, lifting height: 4,600 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Still RX20-14 electric forklift, year of manufacture: 2014, operating hours: only 2,438h! Previous owner: German Armed Forces, rated capacity: 1,400kg, lift height: 4,600mm, triplex mast, hydraulic sideshift, engine: [9W/12PS], weight: 3,186kg, in very good condition! Immediately ready for use! Prodpfx Aksy Ttnheiec Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel.) will be happy to assist you. For further details, please visit our homepage. Subject to errors and prior sale. Power steering, protective roof = Additional information = Lifting capacity: 1,400 kg Overall height: 206 cm Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2016, operating hours: 271 h, lifting height: 4,600 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Cab, rental possible Pedpfx Akjy Ttk Ajijrc = Further information = Lifting capacity: 1,400 kg For more information, please contact Tobias Ebert.

Condition: as good as new (ex-display), Year of construction: 2025, 67641340dc13f Podpfxol Rix Es Akijrc

Condition: used, Year of construction: 2014, operating hours: 2,604 h, lifting height: 4,600 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Still RX20-14 electric forklift, year of manufacture: 2014, battery from 2023, only 2,604 operating hours, previous owner: German Armed Forces, full cab, rated lifting capacity: 1,400 kg, fork length: 1,200 mm, lift height: 4,600 mm, triplex mast, hydraulic sideshift, engine: [9 kW/12 HP], weight: 2,342 kg, very good condition, ready for immediate use. Leasing or financing options available on request. Mr. Mihm (phone) will be happy to assist you. Further information can be found on our homepage. Subject to errors and prior sale. Cab, rental available. = Additional Information = Podpjy Ttlgjfx Akiorc Lifting capacity: 1,400 kg Please contact Tobias Ebert for further details.

Condition: new, Year of construction: 2024, operating hours: 50 h, machine/vehicle number: 305, Available: February 2023 Control: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with T-slots across every 250 mm Prodpfswwq Hcox Akioc Max load: 1000kg distributed over the entire surface 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 min-1 Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blowing air / MMS: outside Drives linear axes Feed speed X and Y axes: up to 50 m/min Z-axis feed rate: up to 30 m/min Color Housing, portal, control cabinet: light gray Z-slider and milling head: orange Additional equipment - 15-way tool changer - Control in a separate, rollable desk

Condition: good (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, DMG DMU40 eVo linear Predpfx Akozl E Unsijc Simultaneous machining Workpiece clamping area: 480x400 Control system: Siemens 840 Dsl - Operate Tool interface: HSK63 Spindle: 18,000 rpm, 35 kW, 130 Nm Tool magazine: 60 Drives: Direct drives (linear motors) in the X/Y axis Position measuring systems: Direct in all axes (glass scales) Coolant supply: Through-spindle coolant system, 40 bar Operating mode 4 Electronic handwheel Infrared measuring probe Laser tool measurement Active cooling of motors, guides, and table Good condition

Condition: used, Year of construction: 2008, operating hours: 134,157 h, functionality: fully functional, travel distance X-axis: 7,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,300 mm, feed rate X-axis: 55,000 m/min, feed rate Y-axis: 55,000 m/min, feed rate Z-axis: 55,000 m/min, total length: 12,200 mm, table width: 2,050 mm, total width: 8,000 mm, total height: 7,800 mm, rapid traverse X-axis: 55 m/min, rapid traverse Y-axis: 55 m/min, rapid traverse Z-axis: 55 m/min, position of the milling head: vertikal, torque: 32 Nm, tool weight: 6,000 g, control cabinet length: 600 mm, control cabinet height: 2,200 mm, control cabinet width: 3,600 mm, tool diameter: 100 mm, As a manufacturer, we are pleased to offer you this portal milling machine from FOOKE GmbH. This machine combines dynamics and precision in a perfect way, making it the ideal choice for machining large components. X = 7,500 mm x Y = 3,500 mm x Z = 2,300 mm Swivel milling head 5 with CNC-controlled A and C axes Compressed air supply to the milling head High-frequency milling spindle (HSK63A, 24,000 rpm, 32 kW) CNC control HEIDENHAIN iTNC 530 (refurbished in 2015) Linear motor drives in the X, Y, and Z axes Exclusive machine table Machine dimensions: Width approx. 8.00 m Depth approx. 12.20 m Height approx. 7.80 m Pedpfxez Da Tmj Akiorc Weight approx. 120 tons Machine operating hours: 134,157 Spindle operating hours: 36,706 Contact: Do you have any questions or need further information on a customized retrofit? Then please send us a message via the platform or call us. As a manufacturer, we look forward to assisting you!

Condition: used, TECHNICAL DETAILS Prodouhbuujpfx Akiec - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK40 - Spindle power : 32,5 [kW] - Spindle speeds : 40.000 [rpm] - Number of spindle hours : 1.211 [h] LINEAR AXES - Travels on X/Y/Z axes : 420 / 320 / 320 [mm] - Cutting feed rates (X/Y/Z) : 60.000 [mm/min] A ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0,001 [°] - Cutting feed rate : 200 [rpm] B ROTARY AXIS - Travel : 100 [°] (+/-) - Indexing precision : 0,001 [°] - Cutting feed rate : 200 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 - Tool exchange time : 5 [sec] TABLE - Table dimensions : Ø 250 [mm] - Maximum weight upon table : 20 [kg] - Distance table / spindle nose (min./max.) : 40 / 360 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 35 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.555 [mm] - Machine height : 2.520 [mm] - Machine weight : 5.000 [kg] MACHINE HOURS - Number of hours under power : 4873 [h] EQUIPMENT - CNC : Heidenhain iTNC530 - Electronic handwheel - Linear scales - 3 colors status lamp - Coolant tank * With washing gun - Chips conveyor - Oil mist extractor : FILTERMIST FX5002 - Spindle cooling unit - Electrical cabinet air conditioning - Tool probe : Renishaw - Workpiece probe : Renishaw - Tool-holders : 60 - Tool preparation bench