Forklift ID No. V00042

STILL RX20 - 18 PL

Condition: good (used), Year of construction: 2004, IXION AUERBACH IA2 TLF-1200.4 Year of manufacture: 2004 Factory overhauled: 2023 CNC control: HEIDENHAIN 430M Travel X (table, longitudinal): 1,200 mm Travel Y (deep hole drilling-milling unit, vertical): 1,200 mm Travel Z (turret, horizontal): 700 mm Travel W (deep hole drilling-milling unit, horizontal): 1,200 mm A-axis (swivel of deep hole drilling-milling unit): +25°/-15° B-axis (NC rotary table): 360° NC rotary table with 5 T-slots: 1,000 x 1,000 mm Max. workpiece weight: 7,000 kg Rated drive power (S1 / S6): 12 / 18.5 kW Torque: 115 Nm Speed range: 60 - 6,000 rpm Hnjdpfx Aeydmuuogcjk Max. drilling depth (in one pass): 1,200 mm (with 2 traveling steady rests) High-pressure coolant system for deep hole drilling oil: 100 bar & 42 l/min Tool changer for 24 tools With spindle air blast Max. tool length: 300 mm Max. tool weight: 3.5 kg Tool diameter Without adjacent free space: max. 90.0 mm With adjacent free space: max. 160.0 mm Equipment inside work area: - Fully enclosed working area with roof - Oil mist extraction - Chip conveyor Required floor space: 5,150 x 5,350 x 4,020 mm

Condition: used, Year of construction: 2015, thread dia. 20 - 80 mm grinding length 3500 mm thread pitch . mm threading lenght min./max. 50/3500 mm centre height 400 mm workpiece length - max. 4000 mm control Siemens 840-Dsl feed speed u-axis 0 - 2500 mm/min feed speed w-axis 0 - 2500 mm/min feed speed b-axis 100 1/min total power requirement 45 kW weight of the machine ca. 24 t dimensions of the machine ca. 10,7 x 4,6 x 2,9 m Thread Grinding Machine / Profile Grinding Machine, suitable for: - the thread grinding of single and multi-start ball screws with gothic profiles and special profiles - Ø 20 to 80 mm with a grinding wheel Ø of 350 to 500 mm - length between the centers up to max. 4000 mm Hnodpfsw Ed S Uex Agcek Equipment / Accessories: - grinding spindle: - capacity 14 kW - with a grinding wheel diameter range of 350-500 mm, cutting speeds between 20 and 75 m/s can be set. - grinding wheels: - diameter new 500 mm - diameter worn 350 mm - bore diameter 203.2 mm - shaped diamond roll: - diameter 121.3 mm - radius 0.5 mm - driver flange for workpiece diameter 15-70 mm - driver: - for 10-32 mm drive diameter on the workpiece - for 31-60 mm drive diameter on the workpiece - for 60-105 mm drive diameter on the workpiece

Condition: excellent (used), Year of construction: 2015, Krauss Maffei KM 900 – 8100 GX Injection Moulding Machine Year of manufacture: 2015 General description: Hydro-mechanical, two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. The machine is equipped with a PV-type proportional valve injection unit adjustment system. Control is handled by the modern MC6 control system, based on an industrial PC with real-time Ethernet technology. The control panel features an integrated 19-inch touchscreen with a color display, LED backlighting, and visualization of all processes using ProcessDesigner. Plasticising unit: Complete unit for thermoplastics processing Wear-protected (abrasion-resistant) version Screw diameter: 105 mm Check valve and open nozzle Technical data: Clamping unit: Clamping force: 9,000 kN Mould opening force (pressure pads): 630 kN Platen size (W x H): 1,660 x 1,530 mm Tie bar spacing: 1,180 x 1,000 mm Max. mould opening stroke: 1,600 mm Hnsdpfx Agjwyxbgjcsk Mould height (min – max): 500 – 1,100 mm Maximum opening stroke: 2,100 mm Ejector stroke: 300 mm Ejector force (forward / return): 140 / 70 kN Injection unit: Screw diameter: 105 mm L/D ratio: 23.0 Injection pressure: 1,778 bar Injection volume: 4,546 cm³ Shot weight (PS): 3,228 g Injection rate: 805 cm³/s Screw speed (standard): 150 rpm Nozzle contact force: 166 kN Electrical and hydraulic equipment: Pump motor rating: 120 kW Heater rating: 59 kW Number of barrel heating zones: 7 Dry cycle time / stroke (Euromap 6): 3.3 s / 826 mm Dry cycle time / stroke (KM standard): 2.9 s / 590 mm Oil tank capacity: 1,450 l Dimensions and weight: Net weight (with control cabinet): 40 t Machine dimensions (L x W x H): 10.72 x 3.03 x 2.51 m

Condition: excellent (used), functionality: fully functional, Aluminum silo with extended support ring - used - Volume: approx. 48,000 liters Container type: silo Condition: used Suitable for food: yes Construction: vertical Internal diameter: approx. 2,400 mm Cylindrical height: approx. 13,750 mm Overall height: approx. 15,000 mm Specific gravity of medium: 0.8 t/m³ Operating pressure: non-pressurized Material / Design Shell material: aluminum Features Support structure: foot ring/stand collar Top end plate: conical top Slope: approx. 15% Bottom end plate: cone Cone angle: 60 degrees Top: 1 x flange DN 100 PN 10 (filling) Hjdpfsx Stccsx Agconk 1 x flange DN 150 PN 10 (vent) 1 x flange DN 150 PN 10 (level measurement) 1 x flange DN 100 PN 10 (spare) 1 x threaded socket 1 1/2" (sensor technology) 1 x roof edge railing with handrail 2 x crane lugs Shell: 1 x stand collar door (approx. 880 x 1800 mm) 5 x pipe brackets for filling pipe 5 x pipe brackets for overflow pipe 1 x filling pipe DN 100 (filling lines and connections for silo trucks may need to be retrofitted in part) 1 x overflow pipe DN 80 1 x threaded socket 1 1/2" (measuring probe) Bottom: 1 x cone (60°) 1 x flange DN 80 (overflow pipe) Fittings: The measuring and control equipment currently installed (where present) is included in the scope of delivery. However, no warranty is provided for its functionality! Otherwise as shown in the photos and drawing. Documentation: Drawing

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 14,171 h, load capacity: 1,600 kg, lifting height: 3,500 mm, free lift: 1,600 mm, fuel type: electric, mast type: duplex, construction height: 2,320 mm, fork carriage width: 1,000 mm, fork length: 1,500 mm, empty load weight: 3,395 kg, total length: 2,150 mm, drive type: Elektro, construction width: 1,070 mm, Electric 4-wheel forklift Load center: 500 Fork width: 100 mm Hnedpeu Dy Uusfx Agcok Fork thickness: 40 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: duplex Condition: ready for use and fully functional Technical condition: very good Front tire type: super elastic Front tire size: 18x7-8 Rear tire type: super elastic Rear tire size: 16x6-8 Battery volts: 48V Battery Ah: 750Ah Battery year of manufacture: 2024 Sideshift, Heater, full cabin, full free lift,

Condition: ready for operation (used), Year of construction: 2011, operating hours: 180 h, functionality: fully functional, Place: Austria Hnjdpfx Agexy Idhocek Available immediately

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 16,546 h, load capacity: 2,000 kg, lifting height: 4,620 mm, fuel type: electric, mast type: triplex, construction height: 2,120 mm, drive type: Elektro, Electric 4-wheel forklift Load centre: 500 Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tyre type: Superelastic Rear tyre type: Superelastic Battery voltage: 48V Sideshift, 3rd valve, interior mirror, Hnsdpsytzawsfx Agcek