Forklift

Still RX 60-50

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,856 h, load capacity: 5,000 kg, lifting height: 3,450 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, mast type: other, construction height: 2,550 mm, battery capacity: 930 Ah, remaining battery capacity: 84 %, battery voltage: 80 V, DGUV certified until: 07/2027, fork length: 1,200 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-50 electric forklift with the following specifications: * Lifting capacity: 5,000 kg * Lifting height: 3,450 mm Credpfx Aszivfxjaxjd * Overall height: 2,550 mm * Year of manufacture: 2018 * Operating hours: 7,856 Still 5.0-ton electric forklift, very good battery, good tires (rear tires new), telescopic mast with clear view, side shifter, fork positioner, lighting compliant with StVZO regulations, fork length 1,200 mm, charger Price ex works, including 1,000 hours of service according to Still manufacturer's specifications and a valid FEM (UVV) inspection upon sale. Inspection, demonstration, and test drive are available by appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors, and typos. We can deliver your new forklift cost-effectively using our own ramp-type low-bed trailer (transport costs on request). Further information and offers can be found on our newly designed website!

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Options: ACB, BendGuard for manual bending, HQ version, interface to 2nd machine Cedpfswykccsx Aaxjrd

Condition: used, Year of construction: 2019, load capacity: 5,000 kg, lifting height: 6,670 mm, total length: 5,250 mm, - Bedienung Sitz - Tragfähigkeit 5,0to - Lastabstand 535 mm - Achslast vorn mit Last 11547 kg - Achslast hinten mit Last 1154 kg Cjdszhxzgopfx Aaxerd - Achslast vorn ohne Last 3845 kg - Achslast hinten ohne Last 3866 kg - Bereifung SE - Räder, Anzahl vorn (x = angetrieben) 2x - Räder, Anzahl hinten (x = angetrieben) 2 - Spur vorn mm 1104 - Spur hinten mm 920 - Neigung Hubgerüst/Gabelträger, vor ° 3 - Neigung Hubgerüst/Gabelträger, zurück ° 6 - Kupplungshöhe mm 546/421 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4284 - Arbeitsgangbreite bei Palette 800 x 1200 längs - Wenderadius 2549 mm - Kleinster Drehpunkt 638 mm - Fahrgeschwindigkeit mit Last km/h 18 - Fahrgeschwindigkeit ohne Last km/h 19 - Hubgeschwindigkeit mit Last m/s 0,31 - Hubgeschwindigkeit ohne Last m/s 0,44 - Senkgeschwindigkeit mit Last m/s 0,55 - Senkgeschwindigkeit ohne Last m/s 0,46 - Zugkraft mit Last N 3600 - Zugkraft ohne Last N 4400 - Max. Zugkraft mit Last N 15670 - Max. Zugkraft ohne Last N 16090 - Beschleunigungszeit mit Last s 5,4 - Beschleunigungszeit ohne Last s 4,7 - Betriebsbremse elektr./mech. - Fahrmotor, Leistung KB 60 min kW 15 - Batteriespannung V 80 - Energieverbrauch 60 VDI-Arbeitsspiele/Stunde kWh/h 12,1 - Arbeitsdruck für Anbaugeräte bar 250 - Ölmenge für Anbaugeräte l/min 30 - Schallpegel, Fahrerohr dB (A)

Condition: used, machine/vehicle number: 516329J00165, Year of construction: 2018, Output: 15.0 kW, lifting capacity: 5,000 kg, unladen weight: 5,398 kg, duplex mast, side shift, partial cabin, STILL afx 30V/140A battery charger, recorded operating hours: 3,461 hours. Crsdpfx Aasy U R Rvsxod

Year of construction: 2011, condition: ready for operation (used), Travel X/Y/Z: 3000mm/1500mm/115mm, max. material thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm, axis speed: 140m/min, laser type: TruFlow 5000, laser power: 5000W (5kW), machine dimensions X/Y/Z: approx. 9300mm/4600mm/2200mm, weight: approx. 12000kg, operating hours (as of February): approx. 75000h, laser hours (as of February): approx. 42000h. Documentation available. On-site inspection is possible. Crsdpfx Ajwzbbrsaxjd

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 4,221 h, load capacity: 5,000 kg, lifting height: 3,480 mm, fuel type: electric, mast type: simplex, construction height: 2,650 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Cedpfxovr Nqks Aaxerd Condition: Ready for use and fully functional Technical condition: good Battery voltage: 80V Battery year of manufacture: 2020 Side shift, fork positioner, 3rd valve, 4th valve, heating, full cabin, air conditioning,

Condition: used, Year of construction: 2015, operating hours: 18,024 h, Type of fuel: Electric Cjdewfpk Ajpfx Aaxjrd Colour: Grey Empty weight: 7.121 kg Dimensions (LxBxH): 305 x 140 x 280 cm Lifting capacity: 5.000 kg Lift height: 420 cm Fork dimensions: 1.150 x 2.240 mm - Year: 2015 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 516329F00201 - Operating hours: 18024 - Lifting capacity: 5000kg - Lifting height: 4200mm - Overhead clearance: 2800mm - Free lift: 0mm - Fork length: 1150mm - Maximum fork width: 2240mm - Minimum fork width: 560mm - Number of wheels: 6 Wheels - Attachment: Side-shift, Fork positioner - Options: Work lights - Mast: Duplex - Drive: Electric - Battery information: - └ Brand/Type: Still - └ Battery voltage: 80V - Transport dimensions: 3050mm x 1400mm x 2800mm (l x w x h) - Transport weight [kg]: 7121kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: ready for operation (used), Year of construction: 2010, operating hours: 15,043 h, laser power: 3,600 W, travel distance X-axis: 6,500 mm, number of axes: 5, This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, it's ideal for precise tube cutting. Contact us for more information about this machine. Crodpex D I H Djfx Aaxjd • Circular diameter: 200 mm • Reject station: 3 m with brush table • Reject tray • Working Range X Tube Axis: 6500 mm • Outer Circle Diameter: 254 mm (Upgraded from standard 200 mm) • Unloading Station: 3 m with brush table, front unloading • Laser Type: CO2 Laser TruFlow 3600 including LensLine (Surcharge upgrade from standard TruFlow 2000) • Control: Sinumerik 840D, Teleservice • Standard Software/Features: NitroLine, FocusLine, SprintLine, Laser power control, Programmable cutting gas pressure, Program re-entry, Automatic shutdown, Workspace lighting, Laser logbook function, Laser cooling unit • Laser: CO₂ laser TruFlow 2000 • Laser cooling unit • Cutting Head: Lens cutting head with 155 mm focal length, ControlLine • Control unit: 84D • Connectivity/data transfer: RJ-45 network connection, USB connection; network connection incl. installation • Safety: CE marking, Multi-beam light barriers, Compact dust extractor 1500 Nm³/h, Protective cabin with Makrolon panels • Ambient Operating Temperature: Up to 43°C • Installation Type: Special machine installation setup Additional equipment • Accessories: • Spare parts case for cutting heads • 1 x remote control kit • Clamping jaw set Ø 16 / 200 mm • U-shaped guide rails for reject station with ID = 200 mm • Automation: • Loading Unit: LoadMaster Tube 6.5 m with bundle support, 2 grippers, 254 mm outer circle diameter capacity, low-scratch design for 6m, swiveling conveyor line, additional gripper D=254 mm • Options for LoadMaster Tube 6 m: • Circular diameter 250 mm • Shorter belt support • Swivelable conveyor section • Additional gripper Ø 200 mm • Additional gripper Ø 250 mm • Special equipment: • Flexible reject station 4.5 m (prototype) instead of reject station 3 m, without brush table • Special installation for flexible reject station • LoadMaster (series version 103) • Installation 100 mm higher (use of wire mesh container possible), decision upon acceptance • Services: • Installation, commissioning, training

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 9,975 h, load capacity: 5,000 kg, lifting height: 5,440 mm, free lift: 1,650 mm, fuel type: electric, mast type: triplex, construction height: 2,560 mm, fork carriage width: 1,300 mm, fork length: 2,400 mm, empty load weight: 8,194 kg, total length: 2,900 mm, drive type: Elektro, construction width: 1,400 mm, Electric 4-wheel forklift truck Load centre: 500 mm Fork width: 120 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tire size: 355/45-15 non-marking Rear tires type: Superelastic Rear tire size: 200/75-9 non-marking Battery voltage: 80V Battery capacity: 840Ah Battery year of manufacture: 2009 Description: In addition to this Still model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-purchase & financing under attractive conditions are always possible. We are also happy to purchase your used equipment outright, even if you do not buy a truck from us. Our owner, Mr. Peter Sawitzki, will be pleased to advise you in detail about this RX60-50. P.S.: Our master forklift workshop specializes in repair, maintenance, refurbishment and custom construction of forklifts from 8 tons and up. We are also happy to offer your vehicle for consignment sale at our facility. Sideshift, Cjdexn U Icspfx Aaxjrd Full free lift,

Condition: good (used), machine/vehicle number: 14352, Year of construction: 2022, operating hours: 5,409 h, load capacity: 5,000 kg, lifting height: 4,780 mm, free lift: 1,500 mm, load center: 600 mm, construction height: 2,500 mm, fork length: 2,400 mm, front tire size: 355/50-15 sit weiss, rear tire size: 23x9-10 weiss, overall weight: 8,258 kg, enginetype: Electric, manufacturer: Still Crsdpfx Ajyv S I Sjaxsd

Condition: used, Year of construction: 2017, functionality: fully functional, bending force (max.): 36 t, TRUBEND CELL 7000 High-End Aut. bending cell Year of construction: 05/2017 ADDITIONAL Functions: ToolMaster Bend (incl. Tool Identification System - TIS) Tool gripper for faster tool change (only in conjunction with ToolMaster Bend and gripper changing module) Conveyor belt Additional system pallet Additional mechanical gripper (without jaws) Additional jaws for mechanical finger gripper Gripper changing module incl. tool cleaning station Multi-suction device with flat suction cups and electromagnets TCB - Thickness Controlled Bending STANDARD configuration: TruBend 7036 Cell Edition - Stable Machine frame Crodpfx Ajyalx Rjaxed - Electro-mechanical direct drive (torque motor) - 6-axis backgauge system with stop sensor - Segmented Wila tool clamps without Tool Identification System - TIS ATTENTION: lower tool clamp in the same design as the upper tool clamp - Switch cabinet air-conditioning BendMaster (15) - Stable frame and manipulator - Bearing load: 15 kg, max. sheet load: 3 kg - Floor tracks: Welded construction with stable guide rail. Travel 3215 mm - Gripper coupling at BendMaster - Electrical drives - Mechanical finger gripper with jaws LoadMaster Bend - Handling system - Multi-suction device with bellows suction cups - Double sheet detection and separation - Transfer station - System pallet Safety - Safety cell with swing sliding doors: The complete working and danger zone is safeguarded by a safety cell Lighting Control system - PC control with 19“ Touch screen - Mobile operating terminal - Network connection - Teleservice via Internet

Condition: good (used), machine/vehicle number: 14351, Year of construction: 2022, operating hours: 3,638 h, load capacity: 5,000 kg, lifting height: 4,780 mm, free lift: 1,550 mm, load center: 600 mm, construction height: 2,500 mm, fork length: 2,400 mm, front tire size: 355/50-15 sit weiss, rear tire size: 23x9-10 weiss, overall weight: 8,300 kg, enginetype: Electric, manufacturer: Still Cjdpsy Aq Dlofx Aaxsrd

Condition: good (used), machine/vehicle number: 14350, Year of construction: 2022, operating hours: 4,888 h, load capacity: 5,000 kg, lifting height: 4,780 mm, free lift: 1,550 mm, load center: 600 mm, construction height: 2,500 mm, fork length: 2,400 mm, front tire size: 355/50-15 sit weiss, rear tire size: 23x9-10 weiss, overall weight: 8,300 kg, enginetype: Electric, manufacturer: Still Crjdpsy Aq Anjfx Aaxod

Condition: used, Year of construction: 2018, controller model: , _____ Csdpfeyy Hgqjx Aaxjrd Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Equipment :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster :- Sensors for 4-axis backgauge system :- Electric drives :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence

Condition: used, machine/vehicle number: 10592, Year of construction: 2017, operating hours: 11,953 h, load capacity: 5,000 kg, lifting height: 3,280 mm, load center: 500 mm, construction height: 2,500 mm, fork length: 2,400 mm, front tire size: 355/50-15 sit weiss, rear tire size: 21x8-9 sit weiss, overall weight: 8,205 kg, enginetype: Electric, manufacturer: Still Cjdpfxjyfzt Uo Aaxsrd