Electric forklift – 4th valve – battery at 78%

STILL RX 60-40

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 4,709 h, load capacity: 4,000 kg, lifting height: 3,680 mm, fuel type: electric, mast type: simplex, construction height: 2,650 mm, fork carriage width: 1,200 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Refurbished, no warranty Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: New Battery voltage: 80V Itjdpfxjzfq Sfs Achjk Battery Ah: 930Ah Battery type: PzS Battery year of manufacture: 2016 Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced, and checked. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cab, safety light, rotating beacon.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, load capacity: 6,300 kg, For sale is a nearly new overhead crane system from Konecranes. The crane is the CXTS model (single-girder bridge crane / profile girder) and is in excellent condition. ATTENTION: The crane shown in the listing photos has already been sold. However, an identical model is still available, but will not be ready for delivery until the end of 2026. TECHNICAL DETAILS - Capacity: 6,300 kg - Span: 18,600 mm - Lifting height: 6.00 m - Year of manufacture: 2020 - Lifting speed: 4.0 / 0.7 m/min (2-speed) - Trolley travel speed: 20.0 m/min (stepless) - Crane travel speed: 32.0 m/min (stepless) MACHINE DETAILS - Weights: Trolley weight: 440 kg; Crane weight without trolley: 1,832 kg - Classification: Crane Class: S3 (DIN 15018); Hoist mechanism group: FEM 2m (ISO M5), Crane drive group: FEM 1Am (ISO M4) - Electrical data: Power supply: 400 V / 48 V / 50 Hz, Rated power: 4.9 kW EQUIPMENT - Radio remote control with push-button transmitter - Additional mobile pendant control (emergency control) - Overload protection and load data memory - Pre-limit and end-limit switches for crane and trolley travel - Signal horn, charging station, and spare battery - Hook collision protection Transport dimensions of the bridge: - Total length: 19,328 mm - Profile height of girder: 622 mm - End carriage width (wheel base): 2,200 mm Transport and loading can be organised across Europe at additional cost if required. Prices excl. VAT Inspection by prior appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Itjdpfx Acsykbimjhjk Machinery Trading - Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your own? For more information or to contact us, please visit our website.

Condition: used, functionality: fully functional, machine/vehicle number: 516327Z02721, Year of construction: 2009, operating hours: 5,832 h, load capacity: 4,000 kg, lifting height: 5,980 mm, free lift: 2,050 mm, fuel type: electric, mast type: triplex, construction height: 2,800 mm, fork length: 1,200 mm, empty load weight: 6,477 kg, total length: 2,886 mm, drive type: Elektro, construction width: 1,400 mm, Electric 4-wheel forklift truck Fahrgestellnummer: 516327Z02721 Load center: 500 Fork width: 125 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Isdpeq S Ek Ajfx Achetk Condition: Ready for use and fully functional Technical condition: good Front tires Type: Superelastic Front tires Size: 355/45-15 Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Size: 21x8-9 Rear tires Condition: 80 - 100% Battery Volt: 80V Battery Ah: 930Ah Battery type: PzS Battery year of construction: 2014 Description: Device is optically and technically refurbished. Maintenance renewed. UVV inspection renewed. Sideshift, Other attachments such as fork positioners or rotator optionally available at extra cost. 3rd valve, 4th valve, rear working lights, front working lights, roof cover, windscreen, semi-cab, full free lift, non-creeping tires, interior mirror, rotating beacon,

Condition: good (used), Year of construction: 2020, operating hours: 8,787 h, load capacity: 4,000 kg, lifting height: 5,080 mm, fuel type: electric, mast type: triplex, construction height: 2,500 mm, empty load weight: 7,200 kg, mileage: 8,787 km, Electric three-wheeled forklift; Brand: Still (Germany); Year of manufacture: 2020; 8,787 operating hours; Capacity: 4,000 kg; Lifting height: 5,080 mm; Mast height lowered: 2,500 mm; Equipped with FREELIFT and SIDESHIFT; FORK SPREADER; Forks: 1200 mm; Battery: With charger and automatic filling system. Isdpfx Ajy Uymmochstk Watch the video on YouTube.

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm material thickness 25 mm weight 920 kg Manufacturer: GERD WOLFF Technical Details: • Length 2400 mm • Width 1200 mm • Height 200 mm • Weight 920 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 6 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. Iedpsynbmmofx Achotk All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: used, machine/vehicle number: 13899, Year of construction: 2011, operating hours: 8,016 h, load capacity: 4,000 kg, lifting height: 5,760 mm, free lift: 1,800 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,780 mm, battery voltage: 80 V, front tire size: 355/50-15, rear tire size: 200/75-9, overall weight: 6,895 kg, Equipment: cabin, 5135898 Serial Number: 516327B00053 Itedpoy Dyl Uofx Achsk Battery Details: 80V 6PzQ 1032Ah (aus 2020)

Condition: good (used), Year of construction: 2020, operating hours: 7,133 h, load capacity: 4,000 kg, lifting height: 5,080 mm, fuel type: electric, mast type: triplex, construction height: 2,500 mm, empty load weight: 7,000 kg, mileage: 7,133 km, Electric three-wheel forklift Brand: Still (Germany) Year of manufacture: 2020 7,133 operating hours Capacity: 4,000 kg Ijdpfsy Uylisx Achjtk Lifting height: 5,080 mm Mast height (fully raised): 2,500 mm Equipped with FREELIFT and SIDESHIFT Fork spreader Fork length: 1,200 mm Battery: 2016 Tested at 77%! Including charger

Condition: new, table length 2000 mm table width 1000 mm table height (lateral area) 200 mm weight 699 kg SIEGMUND authorized dealer - all items available! Product description Iodexabfrspfx Achotk - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 28 hole pattern / dimensions 2000 x 1000 x 200 mm - Extreme plasma nitrided version with scale - with diagonal grid on the table surface - Sidewall with diagonal grid - Including 4x basic equipment

Condition: good (used), Year of construction: 2019, operating hours: 4,996 h, load capacity: 4,000 kg, lifting height: 5,080 mm, fuel type: electric, mast type: triplex, construction height: 2,500 mm, empty load weight: 7,200 kg, mileage: 4,996 km, Electric three-wheel forklift Brand: Still (Germany) Year of manufacture: 2019 Operating hours: 4,996 Capacity: 4,000 kg Lifting height: 5,080 mm Itsdpfx Ajy U Iccochjk Mast height (closed): 2,500 mm Equipped with: FREELIFT and SIDESHIFT Fork spreader Fork length: 1,200 mm Battery: with charger

Condition: good (used), Year of construction: 2014, operating hours: 23,600 h, load capacity: 4,000 kg, lifting height: 4,500 mm, fuel type: electric, fork length: 1,200 mm, empty load weight: 7,150 kg, total height: 2,390 mm, total length: 4,250 mm, total width: 1,450 mm, Equipment: CE marking, cabin, sideshift, Year of battery: 2018. Triplex mast, side shifter, full free lift. Solid rubber tyres. Includes charger. Enclosed cabin, rotating beacon, LED headlights front, halogen front lighting, bluespot rear, LED rear lights, radio in cab, front wiper, rear wiper, cab heating. Itodpfx Asyg Dliechsk

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 499 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures. The welding tables are provided with a scale as standard. Plasma nitrided version: Itodexaab Ejpfx Achsk - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - incl. 6x base equipment

Condition: used, Year of construction: 2007, operating hours: 15,936 h, Type of fuel: Electric Colour: Grey Empty weight: 6.777 kg Dimensions (LxBxH): 290 x 125 x 318 cm Lifting capacity: 4.000 kg Lift height: 491 cm Fork dimensions: 1.200 x 1.150 mm - Year: 2007 - Documentation available: Yes - └ Type Documentation: User manual Itjdpoymdx Nefx Achsk - CE marking present: Yes - CE certificate present: No - Serial number: 516327000881 - Operating hours: 15936 - Lifting capacity: 4000kg - Lifting height: 4910mm - Overhead clearance: 3180mm - Free lift: 0mm - Fork length: 1200mm - Maximum fork width: 1150mm - Minimum fork width: 440mm - Number of wheels: 4 Wheels - Attachment: Side-shift, Fork positioner - Options: Full cabin, Joystick, Work lights, Heating, Radio - Mast: Duplex - Drive: Electric - Capacity: 930Ah - Battery voltage: 80V - Transport dimensions: 2900mm x 1250mm x 3180mm (l x w x h) - Transport weight [kg]: 6777kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2011, operating hours: 14,662 h, Type of fuel: Electric Colour: Grey Empty weight: 6.477 kg Dimensions (LxBxH): 295 x 125 x 297 cm Lifting capacity: 4.000 kg Lift height: 448 cm Fork dimensions: 1.150 x 2.230 mm - Year: 2011 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 516327B00120 - Operating hours: 14662 - Lifting capacity: 4000kg - Lifting height: 4480mm - Overhead clearance: 2970mm - Free lift: 0mm - Fork length: 1150mm - Maximum fork width: 2230mm - Minimum fork width: 560mm Isdpfx Asywtqkochetk - Number of wheels: 4 Wheels - Attachment: Fork positioner, Side-shift - Options: Work lights, Full cabin - Mast: Duplex - Drive: Electric - Brand/Type: Still - Battery voltage: 80V - Transport dimensions: 2950mm x 1250mm x 2970mm (l x w x h) - Transport weight [kg]: 6477kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 185 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 200 mm, total height: 1,892 mm, total width: 875 mm, overall weight: 570 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 750 W, product length (max.): 1,730 mm, number of axes: 3, This 3-axis EMCO PC MILL 125 was manufactured in 2000. It features an X-axis travel of 185 mm, Y-axis travel of 125 mm, and Z-axis travel of 200 mm. The machine includes an automatic tool changer with 10 stations and a clamping area of 420 x 125 mm. If you are looking to get high-quality machining capabilities, consider the EMCO PC MILL 125 vertical machining centre we have for sale. Contact us for further details. • Tool changer: Automatic, 10 stations • Tool holder: SK 30 (DIN 2080 / DIN 69871) • Feed rate (X/Y/Z): 5–4000 mm/min • Rapid traverse: 4500 mm/min • Clamping area: 420 x 125 mm • Max. workpiece weight: 10 kg • Power supply: 230 V / 50 Hz Itodpfxsy E S Uqe Achok Technical Specification Taper Size SK 30

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 8,841 h, load capacity: 4,000 kg, lifting height: 4,330 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, fork carriage width: 1,200 mm, fork length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Electromechanical Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Super elastic Front tire size: 355/50-15 Rear tire type: Super elastic Rear tire size: 21x8-9 Battery voltage: 80V Battery capacity: 930Ah Battery manufacturer: Still Battery type: PzS Battery year: 2022 Description: In addition to this unit, we offer a range of other forklifts and warehouse technology equipment. All our machines are workshop-inspected and FEM4.004 certified. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing options at attractive conditions are available on request. We are happy to provide you with professional and detailed advice on our vehicles. Side shifter, Itjdpfxeywpvpj Achjk