Walking floor semitrailer

STAS 13.50 "WF 87 Farmstar"

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis Manufactured in a self-supporting aluminum construction with corresponding reinforcements in the lower chord for particularly high stability and strength. Subframe made of aluminum, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st and 3rd axles can be lifted separately with starting assist (without central control unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel rims + approx. 120 kg) Kingpin Aluminum swivel kingpin, manufacturer Alu-Leg, 2 x 10 tons support load, swivel feet for air suspension. Braking System Nsdpfoy U Syrox Abkjwh According to E.E.G. standard, two-line braking system, EBS E system Wabco with RSS system (Roll-Stability-Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator. Electrical System According to the guidelines of the STVZO (German Road Traffic Licensing Regulations) with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin socket, with side marker lights in LED design, 2 work spotlights at the rear, 2 LED work spotlights on the side at the height of the kingpin, 1 LED work spotlight inside front left, operable from the outside. Body/Container "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn aluminum container, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper chord, plank profiles fully welded inside!, floor as a sliding floor system mounted on 140 mm aluminum cross members, floor load approx. 7 tons/m2, cross members mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30 mm thick with 4 rotary rod locks mounted in the welded aluminum rear frame in Teflon bearings and Inox bearings, running aluminum wall hanging in the reinforced aluminum upper chord with "Kevlar tarpaulin" for complete unloading, lateral brush seal and additional Kevlar tarpaulin on the side, integrated discharge chute with foldable cover plate in the floor end operable from the outside left rear, inspection window at the rear left, 1 sample slide in each rear door, i.e. 2 pcs., service door on the left in the front wall. Hydraulic System "Cargo Floor" 24 plank system - smooth design! Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed brackets on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed brackets, line size NW 21, fixed brackets with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, actuation at the rear left with cable operation in a lockable, watertight box, or without hydraulic hoses. Accessories PVC mudguard

Condition: new, axle configuration: 3 axles, loading space length: 10,636 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Chassis manufactured using a self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, component chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc brake 22.5" Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st + 3rd axles can be lifted separately with an assistance function (without central control unit equipment), 3rd axle additionally equipped with Optiturn, ECAS air suspension, tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, Alcoa aluminum rims DuraBright-11, 75x22.5 ET 120 kingpin screwed into a 10 mm thick plate Fifth Wheel Aluminum swivel landing gear, 2 x 10 tons support load, for air suspension, we use swivel feet Braking System According to E.G. standard, two-line braking system, EBS E-system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical System Nedpfxefakkce Abkewh According to STVZO guidelines with 2 LED five-chamber lights type Aspöck Europoint LED integrated in the aluminum rear panel, 24-volt system with 1x 5-pole and 2x 7-pole socket, with side marker lights in LED design, 2 separate LED work lights at the rear, 2 LED work lights on the side starting at the 1st axle, at the height of the fifth wheel supports, 1 LED work light inside, at the front left, operated from the outside Body/Tipping Body "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross members, floor load approx. 7 tons/m2, cross members mounted at a relatively close spacing (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum swing doors, 50/30 mm thick, with 4 swivel rod locking mechanisms, attached in the welded aluminum rear frame in Teflon and stainless steel bearings, moving aluminum side wall suspended on the reinforced aluminum upper belt with "Kevlar liner for complete emptying, lateral brush seal and additional Kevlar liner on the side, integrated discharge chute with foldable cover plate in the floor end, operable from the outside, left rear, viewing window at the rear left, 1 sample slide in the rear doors, thus 2 pieces, service door at the front left Hydraulic System "Cargo Floor sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 670 PE-HD gliders, approx. 6mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed mountings on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed mountings, line size NW 21, fixed mountings with a size and design to be specified, operating pressure 190 max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operatio

Condition: new, Cutting capacity, round, 0°: 127 mm Cutting capacity, flat, 0°: 125 x 130 mm Cutting capacity, round, 45° right: 90 mm Cutting capacity, square, 45° right: 90 x 90 mm Cutting capacity, round, 60° right: 45 mm Cutting capacity, square, 60° right: 45 x 45 mm Vise opening: 130 mm Saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speed: 60 m/min Motor power: 0.55 kW Voltage: 230 V Weight, approx.: 25 kg Features: - Saw frame swivels up to 60° - Ideal for cutting pipes, profile materials, and solid materials made of stainless steel, iron, etc. - Sturdy saw arm for vibration-free operation - Low noise due to robust design - Automatic shut-off after cutting is complete via a micro-limit switch - Quick-release vise for easy and fast workpiece clamping - Precise, adjustable saw blade guide for optimal cutting results - Environmentally friendly, as the use of lubricants and coolants is eliminated Njdpfoilk Ekox Abkjwh - Ideal for use on construction sites due to its low weight - Base frame available as an option (not included in the scope of delivery) Equipment: - Saw blade 1440 x 13 x 0.65 mm - Material stop - Ergonomic handle Base frame available at an extra cost: 129 euros net (special price)

Condition: used, machine/vehicle number: 1, empty load weight: 8,000 kg, maximum load weight: 31,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2012, loading space length: 13,620 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, suspension: air, tire size: 385.65 r 22.5, color: white, Year of construction: 2012, Equipment: ABS, Krone semi-trailer with an ATP-compliant isothermal box body, featuring a double adjustable internal floor with longitudinal bars, walls with a honeycomb structure for hanging garments, a rear roller shutter, an internal height of 2.70 m, and an aerodynamic rear pass-through section. Douplex steel Krone body, year 2012, 3 disc-braked axles with the first axle being liftable. SOLD BY: INTERDRIVE SRL - PARMA. Nsdoilgk Uspfx Abkowh

Condition: good (used), hydraulic pump with gasoline engine -mobile hydraulic unit -Gasoline engine: JLO L152 -Power: 4.4 KW -Hydraulic pump: Hawe R6.0 -Performance: 4.3 L/min at 1450 rpm, pressure 350 bar Nedsb A Hpaspfx Abkswh

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Reinforced continuous chassis design, new body manufactured using a self-supporting construction with corresponding reinforcements in the lower belt for exceptionally high stability and strength, 140 mm high reinforced cross members (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure (semitrailer construction max. 39,000 kg). Axles and Suspension: Disc brake 22.5". Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard information center, electronic brake wear indicator BVA readable in the central control unit (display), 1st axle with starting aid (new EU regulation, without central control unit option), (optional: 1st and 3rd axles can be lifted via a control). Tires and Wheels 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on steel rims, silver, 11.75x22.5 ET 120. Landing Gears Mechanical landing gears with two speeds, 2x 20 tons support load with swivel foot. Braking System Nwedpfxogcw Rme Abkeh According to E.G. standard, EBS E-system Wabco with RSS system (Roll Stability Support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System According to the guidelines of the EU standards 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint 3 integrated into the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels at the rear, position lights at the front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the U-protection. Body/Dump Body: Body fully welded inside. Reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminum dump body, side walls with 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor designed as a sliding floor system on 140 mm aluminum cross members, floor load capacity approx. 9 tons/m2, cross members mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30 mm thick with 2 swivel rod locks, attached in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side. Hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, sliding rear discharge wall with Kevlar liner approx. 1,800 mm length plus side Kevlar sealing, service door in the front wall with ladder swinging inwards. Hydraulic System: Cargo - Floor Sliding Floor System Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE/HD sliders plus anti-lifting slide bearings, type CF 10 mm floor design, hydraulics with approx. 200 mm working stroke, fixed elements on the front wall, separate possibility for connection of the hydraulic line under the vehicle with fixed elements, line size NW 21, fixed elements with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electrical operation at the rear left with remote control integrated into a l

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Design with continuous chassis, newly manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, reinforced cross members 140mm high (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brake 22.5, Jost (DCA) axle assembly design, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard information center, electronic brake wear indicator BVA readable in the central control unit (display), 1st axle with starting aid (new EC regulation, without central control unit option), (optional, 1st and 3rd axles can be lifted). Tires and Wheels: 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Kingpin: 2" screwed into a 10mm thick plate. Landing Gear: Mech. support winch with two speeds, 2x 20 tons support load with swivel foot. Braking System: According to EG standard, EBS electronic system Wabco with RSS system (Roll-Stability-Support) and Premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EG standard 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED version, 2 reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2 separate halogen reversing lights integrated in the U-profile. Body/Dump Body: Body fully welded inside, reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400, aluminum dump body, side walls 30mm thick aluminum plank profiles (2-3 mm) 600mm wide, completely welded with upper and lower belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140mm aluminum cross members, floor load capacity approx. 9 tons/m2, cross members mounted closely together (approx. 350mm), design with special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30mm thick with 2 swivel rod locking mechanisms, fastened in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side, hard wear plates on the side walls approx. 2000x1500x4mm, fully welded, moving residual emptying wall with Kevlar sheeting approx. 1800mm length plus side brushes with Kevlar sheeting seal, service door in the front wall with ladder, folding inwards. Hydraulic System: Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lifting slide bearings, type CF 10mm floor design, hydraulics with approx. 200mm working stroke, fixed points on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed points, line size NW 21, fixed points with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric operation behind the left side with remote control integrated in a lockable waterproof box, without hydraulic hoses. Nwjdpfx Abjfi Nmwjkjh Accessories: 6 PVC mudguards with 2 anti-splash mud fla

Condition: used, maximum load weight: 35,000 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2026, loading space length: 12,213 mm, loading space width: 2,475 mm, loading space height: 2,300 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,856 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle AGRICULTURAL walking floor SANH 70 cbm First registered 05/ 2024, in new condition Dimensions i.L. (LxWxH) 12,213 x 2,475 x 2,300 mm Volume approx. 70 cbm Empty weight only 7,010 kg Fifth wheel height approx. 1,250 - 1,300 mm Total height approx. 3,850 mm Aluminum short chassis over the axles SAF axles with large disc brakes, 430 mm, reinforced "Off-Road" version Wabco Trailer EBS with RSS stabilization system 1st axle LIFT AXLE 3rd axle self-steering Tires 6-fold 385/65 R 22.5 ALUMINUM drop supports full load (2x 10 t.) 4x LED work lights Cargofloor moving floor agricultural version with 15 boards 6 mm smooth End caps aluminum welded RADIO remote control Side wall panels complete welded (grain version) rear portal support pivots at the top hydraulic connections at the top and also at the bottom of the support legs roof crossbar reinforced version, galvanized Nsdpfx Ajv Dz Ixebkswh integrated grain discharge funnel at the rear, outlet opening downwards, operation from the side RENTING is the new BUYING, also available from us as a full-service rental-----

Condition: used, machine/vehicle number: 8422 151, Maximum pressure: 250 bar Nedpfjbp Dpksx Abkjwh Delivery rate: 1.6 m³/min Electrical connection: 380 V, 0.45 kW Space requirement: 200 x 250 x 350 mm

Condition: used, machine/vehicle number: 1, empty load weight: 8,000 kg, maximum load weight: 30,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 10/2005, next inspection (TÜV): 10/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 92 m³, suspension: air, tire size: 385.65 r 22.5, color: red, Year of construction: 2005, Equipment: ABS, tail-lift, Semi-trailer, STAS, 92 m3 capacity, with a 21-slat moving floor, ideal for waste transport. Features include an adjustable, sealed hydraulic tailgate and a closed roof covering 2/3 of the trailer. Three-axle disc brake system with a steering third axle. Includes a front bulkhead. Year of manufacture: 2005. Valid inspection until 31.10.2020. - DEALER: INTERDRIVE SRL - PARMA. Nedpeh I Id Nsfx Abkowh