Sealing machine

Somme 323 can seamer

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Pratika 80 MPS Tjdpfx Aeyant Rokiod The Minipack Pratika 80 MPS is a fully automatic side sealing packaging machine. It is designed for products with a maximum height of 360 mm and is also suitable for very long products. – Fully automatic side sealing packaging machine (continuous side sealing) – Maximum product height: 360 mm – Product lengths over 2 m possible – Usable seal bar dimension: 700 mm – Maximum film roll dimensions: Ø 350 × 800 mm – Infeed conveyor height: 915 mm – Machine dimensions (closed): 2,785 × 940 × 1,770 mm – Machine dimensions (open): 2,785 × 940 × 2,280 mm – Output: up to 3,000 packs/h (depending on product/film)

Condition: like new (used), Juice Mixing and Preparation Line with Homogenizer – Stainless Steel Industrial line for mixing, preparation, and homogenization of juices, designed for the production and conditioning of juices, nectars, fruit beverages, and other liquid or semi-liquid products. The installation consists of several stainless-steel process tanks, mixing systems, sanitary piping, pumps, instrumentation, and a homogenizer, allowing for various product preparation operations to be carried out within a single unit. Homogenization reduces and more uniformly distributes the particles present in the product, helping to improve its stability, texture, and consistency, and reducing the tendency for phase separation, depending on the formulation. MAIN FEATURES -Type: Juice mixing and preparation line -Application: Juices, nectars, and beverages -Several stainless-steel process tanks -Tanks with mixing systems -Integrated homogenizer -Product mixing and homogenization -Circulation and transfer system -Sanitary pumps -Process piping and valves -Pressure and temperature instrumentation -Batch preparation and formulation -Possibility of product recirculation -Construction primarily in stainless steel -Hygienic design for the food industry -Unit mounted on a common frame -Integrable with thermal treatment and filling systems PROCESS The different ingredients or base products are introduced into the preparation tanks, where mixing, dissolution, ingredient incorporation, and conditioning operations can be carried out. Subsequently, the product can circulate through the homogenizer, where it is subjected to a mechanical treatment designed to reduce and uniformize the size of the particles or dispersed phases. Depending on the formulation and installed configuration, the system can be used for: -Preparation and mixing of juices -Production of nectars Tsdsx S E E Aopfx Akiod -Mixing of different concentrates or pulps -Ingredient incorporation -Homogenization -Suspension stabilization -Reduction of phase separation -Pre-treatment before thermal processing -Feeding filling lines APPLICATIONS Especially suitable for manufacturers of juices, nectars, fruit beverages, liquid purees, and other food beverages that require a versatile installation for preparation and homogenization. It can be used with products containing pulp or suspended particles, subject to the characteristics of the product and the configuration of the homogenizer and other installed equipment. The line can subsequently be integrated with pasteurizers, sterilizers, heat exchangers, aseptic tanks, and filling systems. Machine available for inspection. Additional technical information, capacities, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We offer the Stephan Microcut MC15 cutter, designed for precise grinding, mixing, and emulsifying food products in food processing plants. It is a compact, industrial machine manufactured by Stephan Machinery GmbH, a company renowned for its solutions for producing fillings, emulsions, pastes, sauces, and other products requiring a uniform texture. The MC15 model is ideal wherever consistent processing results, high-quality grinding, and stable operation under production conditions are essential. With a rotational speed of 2945 rpm and a power output of 11 kW, the machine ensures intensive and effective processing of raw materials, resulting in a uniform consistency of the final product. It is an excellent solution for applications requiring precise cutting and dispersion of ingredients. The Stephan Microcut cutter is a good choice for companies looking for a used, reliable machine for precise product processing. Tjdpfoy Eplwsx Akijd Technical specifications: Manufacturer: Stephan Machinery GmbH Model: Microcut MC15 Year: 2020 Power supply: 400 V Power: 11 kW Rotational speed: 2945 rpm Current: 22 A Motor type: HEFIE3 132L/2-2200 Advantages of the Stephan MC15 cutter precise grinding and emulsification of the product, high operating speed, compact, industrial design, German build quality, suitable for the production of fillings, emulsions, pastes, and sauces, stable operation in an industrial environment. Stephan Microcut MC15 is a practical solution for companies that want to improve product processing quality and work with a proven machine from a reputable manufacturer.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C Todpfxoq H H Rue Akijd c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos.

Condition: excellent (used), Viessmann Vitomax heating boiler 2100 kW. Tjdpfjyzct Nox Akijd

Condition: excellent (used), Inotec emulsifier, type: I175CD-75DVZ, 400 V, 3 Ph, 50 Hz, 182 A, 111 kW, plate diameter: 175 mm, total dimension: 1850 mm x 1200 mm x 2785 mm, dimensions switch cabinet: 600 mm x 1250 mm x 2350 mm. Tjdepcdgpepfx Akijd

Condition: used, Year of construction: 2023, operating pressure: 10 bar, Steam boiler Bosch Type: UL-S 5000 Year of manufacture: 2023 Max. capacity [kg/h]: 5000 Max. allowable pressure [bar(g)]: 10 Min./max. allowable temperature [°C]: 0 / 184 Total volume [l]: 9630 2. Economizer (ECO) Tsdpfx Akjz Sy A Eeiod Type: ECO 1 Year of manufacture: 2023 Max. thermal capacity [kW]: 187 3. Burner Fuel: Gas / natural gas N Max. permitted pressure upstream of safety shut-off valve: 500 mbar (gas) Manufacturer: Weishaupt Marking: CE-0085BU0359 Type: WM-G30/2-A ZM-3LN Standard(s) complied with: EN 12953-7:2011, EN 676:2020

Condition: new, Year of construction: 2025, Machine to close cans by seaming the lid onto the can - Specifications: max. speed of the machine in neutral: of the machine in neutral: 40 cycles/min; spin speed for sealing: 340 spins/minute; range for can: diameter: 50-160mm, height: 50-200mm; power: 1.1kW; machine dimensions: L2050×W1000×H1800mm; weight: 1100kg. Tedpfx Aov Nk Tujkied That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: like new (used), Year of construction: 2021, Inotec I175-IT5-110D Emulsfier Inotec emulsifiers used for the production of fine minces in the meat industry and for the production of fine emulsions of meat, vegetables and fruits. Manufacturer: Inotec Model: I175-iT5-110D-FU-SP Year: 2021 Tedpfx Akoy Hqnlsiod Power: 206A / 128kW Capacity: Up to 7.000 kg/h Hole plate diameter: 175 mm Hopper capacity: 200 liter Machine dimensions LxWxH: 1.920x1.150x1.480 mm Machine weight: 900 kg.

Condition: excellent (used), ANGELUS 40P Automatic Can Seamer with 21-Piston FMC Filling Unit – Stainless Steel Automatic can filling and seaming unit consisting of an FMC filling unit with 21 pistons and an ANGELUS 40P seamer, designed to continuously perform the operations of product dispensing and hermetic sealing of cans in industrial canning lines. The filling unit incorporates 21 pistons, providing repetitive volumetric dispensing before transferring the cans to the ANGELUS 40P seamer, where the sealing is performed by double seaming between the body of the container and the lid. The combination of FMC and ANGELUS technologies provides an industrial solution especially suitable for production lines that require continuity, consistent filling, and reliable container sealing. MAIN FEATURES -Seamer: ANGELUS -Model: 40P -Filling unit: FMC -Number of filling pistons: 21 -Type: Volumetric filler + automatic can seamer -Automatic and continuous operation -Dispensing by pistons -Volumetric filling system -Automatic can feeding -Synchronized transfer between filler and seamer -Lid feeding and positioning -Automatic sealing by double seaming -Construction mainly in stainless steel -Protective enclosures -Access for inspection, cleaning, and maintenance -Robust industrial structure -Integrable into complete canning lines PROCESS The cans are automatically fed into the FMC filling unit with 21 pistons, where they are positioned and receive a controlled amount of product via the volumetric dispensing system. Once the filling is complete, the containers are automatically transferred to the ANGELUS 40P seamer. The lid is positioned on each can, and the seamer performs the necessary operations to form the hermetic double seam, leaving the container ready for subsequent processing and conditioning stages. It can be integrated with: -Can depalletizers -Container washing/rinsing machines -Product feeding systems -Liquid topping dispensers -Vacuum equipment -Filled can washers -Autoclaves/retorts -Pasteurizers -Cooling systems -Labeling machines -Cartoning and palletizing machines APPLICATIONS Especially suitable for canning industries and canned food manufacturers who need to automate the filling and seaming operations together. The 21-piston FMC system can work with different food products, depending on their viscosity, particle size, container format, and installed configuration. It may be suitable for various vegetable preserves, prepared foods, sauces, and other foods compatible with volumetric dispensing in cans. Tedpswn Dl Hofx Akiod The combination of the 21-piston FMC filler and the ANGELUS 40P seamer constitutes a robust solution for industrial can filling and seaming lines. Machine available for inspection. Additional technical information, can formats, capacities, production speed, dimensions, additional photographs, or videos can be provided upon request.