SIGNODE Strapping machine

SIGNODE Strapping machine

Condition: used, MAIR Automatic packaging machine MPS RH150/D/4/SL & SIGNODE Automatic strapping unit M400 1. MAIR PACKAGING MACHINE, model MPS RH150/D/4/SL Model MPS RH150/D/4/SL Pat. automatically packs round tubes in hexagonal bundles. The Machine allows the strapping operation to be carried out automatically in a fix position, with the bundle moving sideways and stopping automatically at the programmed strapping positions. It is composed of: - Four tube lift chain conveyors with carrier teeth and intermittently driven for the lifting of one tube at a time, coming from the threading machine, to the aligning area; - One driven rollway to align the tube against an adjustable end-stop, before the row formation; - Two storage areas for the tube row; necessary during the bundle evacuation cycle; - One sturdy structure in welded structural steel, forming a bridge; - Tube row handling system which picks up a row of tubes at a time from the second row storage and places it down onto the bundle forming brackets. - Handling is performed by a series of electromagnets which perform a rotary movement during the row transfer cycle; - Four driven vertical brackets for bundle formation and holding. They are provided of adjustable blades according to the required bundle size and shape and they will be lowered in order to allow the bundle laying down on the evacuation trolley. - Driven evacuation trolley, sliding on rails fixed to the floor and equipped with lower driven rollers and pairs of retaining vertical loose rolls. - Driven flat conveyor to transport the bundle after the strapping area. - Driven storage chains suitable to approach bundles at the selected quantity. - Drainage station for bundle lifting, to allow the coolant outlet from tubes; it is equipped with two hydraulic devices driven by a hydraulic power pack. - Control switch cabinet. 2. SIGNODE AUTOMATIC STRAPPING STATION, model M400 The formed bundle is automatically transferred, by the driven rollers of the evacuation trolley, to the automatic Strapping Station. The bundle will be stopped at the programmed strapping positions to allow the automatic application of the steel strap. It is composed of: - SIGNODE automatic Strapping Machine Model M400/PA/TSM for vertical strapping, - Pneumatic strapping floating head for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness; - 450 kg. jumbo coil dispenser with electrical unwinding; - Switchboard. 3. WEIGHING STATION Model KG8/DY The weighing station weighs tube bundles by means of load cells. Bundles are transferred by the driven storage chains to the weighing position. The Weighing Station is located under the pneumatic lifting devices which will lift the bundle in order to allow the weighing operation. It is composed of: Lodpfx Aoymahyokwsah - Bottom frame to be fixed to the floor, complete with four supports, linkages and loading cells. - Top holding frame, able to receive the bundle lifting devices. - Compact weight transmitter. 4. MANAGEMENT INFORMATION SYSTEM Model DATAPACK 3/T The Datapack Management System software allows the operator : - To control and monitor tube production in real time. - To set the a new bundle configuration with its strap application positions. - To store the various bundle configurations and strap application positions into an archive where they can be easily retrieved. - To create batches of different bundle configurations and then load them into one production sequence. - Monitor all alarm and fault messages (trouble...

Condition: used, Year of construction: 1998, functionality: fully functional, For sale: Coil metal decoiling, slitting, and recoiling line Condition: used, connected – available for live demonstration. Designed for coil metal decoiling, precise slitting into narrower strips, and recoiling into smaller coils. Technical specifications: Year of manufacture: 1998 Made in: Poland Max. metal width: 1250 mm Knife pairs: 5 Longitudinal slitting, steel: min 0.4 mm / max 1.2 mm Film application function Scrap cutting guillotine Line includes: Decoiler 5 T Recoiler 5 T Multi-knife disc shears Braking and separating segment Turnstile with separator Control panel Purpose: The line is intended for preparation of coil metal for further processing: Lasdpfxjxlcp Nj Akweh decoiling, precise longitudinal slitting, recoiling into smaller coils. If you have further questions – we will be happy to assist you.

Year of construction: 2001, condition: good (used), Heavy-duty roller conveyor, 2 units, driven Ledpfsh Icrnjx Akwoah Overall height: 600 mm Width: 1400 mm Length: 7000 mm All dimensions are approximate System is immediately available and has already been dismantled.

Year of construction: 1978, condition: used, 1,2 t, Coil OD 1.650 mm Ledpfstn Diex Akwjah 20 - 300 x 0,4 - 3,5 mm

Condition: used, Year of construction: 1994, sheet width / mm plate thickness / mm distance between columns / mm Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Lodjuddh Ajpfx Akwsah Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment

Condition: ready for operation (used), Good condition Max width: 1300 mm Max diameter 1200 mm Ledpfsflvfvex Akwsah

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2600 kg. range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment Lodpfexaa I Sjx Akwjah - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: ready for operation (used), The item in my auction is a conveyor belt with a length of 4.7 m and belt width of 1.35 m. I have four identical units. The price is for 1 piece. Possibility of transport. Laodswz Uktepfx Akwjh

Condition: like new (used), functionality: fully functional, Year of construction: 2010, The line is from 2010. Modernization is being done in 2020. ZEMAN CZS LINE SPECIFICATIONS. ZEMAN's flagship product, the fully automated "PURLIN" line, is used to produce open, cold-formed sections such as C, Z, and SIGMA, in various widths and shapes, thanks to fully automatic adjustment of the profiling rollers. Coils up to 750 mm wide and 1.25 mm to 3 mm thick sheet metal in grade S-390 and lower can be used as raw material. The machine is designed to produce components up to 15 m long. The width of the specially hardened profiling rollers is infinitely adjustable, using only dedicated software. A fully integrated "flying punching" device creates all types of mounting holes, and the entire process is continuous, meaning the material does not stop for individual operations such as punching holes or cross-cutting. To maintain production efficiency, the line speed is dynamically optimized. The machine decelerates and accelerates automatically without operator intervention. A coil uncoiler with a maximum working load of 15 tons is mounted on a mobile trolley, enabling precise centering of the material strip before feeding it into the straightener. The straightener, along with a crescent straightening system, allows for straightening the material, ensuring the required sheet flatness and reducing the crescent on the feed belt. 2. Punching Section This section contains 5 double, "flying" punching portals, which can be equipped with 20 small (up to 40 mm) or 10 large (up to 100 mm) tools (punches and dies) for punching mounting holes. A combination of these tools can also be used. 3. Pre-cutting Shear A "flying" shear used to make preliminary holes for the cutting shear. This process is designed to maintain material continuity, resulting in a more precise profile shape, especially at its beginning and end. This is an adaptive guillotine that adjusts the width of the hole being cut to the width of the sheet metal strip. 4. Guide Carriage/SIGMA Modules The guide carriage is used to center the sheet metal strip before entering the profiler. It is interchangeable with the module for producing Sigma-shaped profiles. To produce S+ profiles, the guide table should be removed and two Sigma modules inserted. These modules position fully automatically and independently, left and right. 6. Rotary Cut-Off Guillotine. The rotary cut-off guillotine with hook knives is used to finally cut the profile from the material strip using the holes made by the pre-cutting guillotine. This is a "flying" guillotine, Lodpfjymampjx Akwjah so the sheet metal does not stop during the cutting process. Depending on the profile being produced, a properly oriented cutting cassette should be attached. 7. Receiving Table The receiving table is used to automatically discharge the completed profiles from the roller conveyor. The elements are then manually arranged into a package. The design allows for easy bundling of the package. The table is designed to accept 15-meter profiles and allows for access by a forklift or overhead crane to collect the package of profiles.

Condition: used, Max height: 2000mm Max diameter: 6mm Lsdpfevpfp Djx Akwjah