Switchgear & control

Siemens SGT5-4000F

Condition: used, functionality: fully functional, operating hours: 4,189 h, fuel type: diesel, mast type: duplex, FORKLIFT TCM FD25Z1 IZUSU ENGINE DIEZEL SHORT MAST.....START AND DRIVE..... Fodpfx Ast U Ivtofnjpc

Condition: good (used), Approx. 30 running meters Schaefer R3000 shelf rack Manufacturer: Schaefer R3000 as new, see pictures Over 300 meters available upright, galvanized, height 2,5 m, depth 40 cm Shelves, galvanized, 100 kg load/ shelf, width ca.100 cm Negotiable price: € 2.890,00 net ex stock Fodecfhx Topfx Afnspc Offer consists of: 31 pcs. uprights or frames, 2,5 m, galvanized 90 pcs. Shelves, 100 kg load per shelf, galvanized 10 pcs. cross bracing for stiffening. 3 levels per bay (of course more levels are possible with extra charge). Heights 2,3m, 2,5m or 3m available. Goods are in stock. Constantly over 3000 running meters of pallet racks from numerous manufacturers in stock. Transport and assembly available on request. More info on request. (Changes and errors in the technical data, specifications and prices and prices and subject to prior sale! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous articles from various areas. To get to our site, please click on our logo! broom-clean business clearances company dissolutions Fast- flexible - ready to hit! We clear and dispose also for liquidators. Write us with some keywords, we will contact you immediately.

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 24 h, I am selling full complete onion peeling processing line with M&P onion peelers, items are listed below: -6x M & P onion peeler machine Fpodpfx Aotzmifsfnjc -all conveyers, elevators for transport peeled, unpeeled and waste product -inspection table -all working platforms -all hoppers for row (unpeeled materials) Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Year of construction: 1997, condition: used, Technical details: Rated capacity: 1100 kVA Revolution per minute: 1500 U/min type of fuel: Wasserstoff / Steam / Vapor max. temperature: 420 Grad weight: 3,9 t STEAM TURBINE other data: - Power: normal 560 kW and max. 820 kW - P1 64 bar - P2 11,5 bar - 1N = 1500 Ampere - Generator type DSG74-M1-4W; 400 V; - Generator nominal power: 1053 kVA / nominal effective power 820 kW - Turbine is suitable for operation with exhaust steam temperature of approx. 405 °C. - A throughput of 2.8t live steam / h in continuous operation is only possible in load-free condition. Sale of the turbine as described and as is! The performance data given are manufacturer's data. These may vary due to age-related wear! We do not have and do not sell spare parts. For spare parts please contact the manufacturer: Dresser-Rand Siemens !!! i.D. * Fedpfsu Nvbuex Afnopc

Condition: good (used), turning diameter over cross slide: 380 mm, spindle bore: 70 mm, turning diameter: 640 mm, turning diameter over bed slide: 900 mm, Characteristics: Length between points: 2.000mm Fsdpfjudh Sljx Afnspc Diameter admitted on bed: 640mm Diameter admitted on carriage: 380mm Diameter admitted on neckline: 900mm Shank pitch: 70mm Includes: 400mm 3-jaw chuck 390mm 4 independent jaw chuck Open steady rest and closed steady rest Quick-change toolholder with 4 tool holders.

Condition: used, Technical details: welding current: 500 A weight of the machine approx.: 128 kg dimensions L x W x H: 1,2 x 0,8 x1,2 m Control: Display for welding current with 2/4-cycle switchover, pulse, infinitely variable Cooling system: Water-cooled with frost protection Shielding gas: Solenoid valve without pressure reducer 4.0 m hose package Fodpevz Abhsfx Afnepc Torch head: Gas-cooled Ground clamp with ground cable 4.7 m Wire feed: 4 roller drive with wire Ø for 1.0/1.2 mm *

Condition: used, Year of construction: 2003, Diesinking / EDM Travel distance X: 350 mm Travel distance Y :250 mm Travel distance Z: 300 mm table size X: 500 mm table size Y: 400 mm Fedpjvyzf Nsfx Afnopc max. workpiece size X: 780 mm max. workpiece size Y: 530 mm max. workpiece size Z: 300 mm max. electrode weight: 50 kg max. workpiece weight: 500 kg electrode changer: 4 - time generator: 64 Ampere drop tank control Charmilles

Condition: good (used), functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, offline coater, calander, reeler, offline calanders and slitter winders. Various updates including headbox, top former, press section, offline coater, Voith speedsizer, Voith jet coaters and steambox & ceramic rolls. Fodpfx Aovptqiofnjpc Characteristics: Capacity: max ~ 240000 T/pa Width: 4800 mm Grammage: 40 – 170 gr/m2 Speed: max 1165 m/min

Condition: ready for operation (used), Year of construction: 2018, operating hours: 60,000 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, power: 3,028 kW (4,116.93 HP), empty load weight: 10,000 kg, fuel: domestic gas H, control cabinet height: 2,000 mm, control cabinet length: 600 mm, control cabinet width: 800 mm, nominal power: 2,679 kW (3,642.42 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, GE Jenbacher JMS 616 GS-N.L Gas CHP Unit Fuel Type: Natural Gas Electrical Output: 3,065 kW Thermal Output: 2,420 kW Total Efficiency: 85.6% Electrical Efficiency: 42.9% Thermal Efficiency: 42.7% Voltage: 690 V Frequency: 50 Hz RPM: 1,500 Engine Configuration: V16 (60° angle) Bore x Stroke: 190 mm × 220 mm Displacement: 99.8 L Fuel Consumption: Approx. 597 Nm³/h (at LHV 9.5 kWh/Nm³) Noise Level: 101 dB(A) at 1 metre Fjdpfx Aowptfrofnspc Dry Engine Weight: approx. 10,000 kg Dimensions (L×W×H): 8,300 × 2,200 × 2,800 mm ⚙️ Included Equipment Turbocharged engine with intercooler STAMFORD LVSI 804 W alternator (rated 3,555 kVA) LEANOX control system Electronic ignition system Full lubrication system (pump +filters) Heat exchangers for coolant and oil Control panel with visual interface Pre-heating system Gas train according to DIN-DVGW standards

Condition: excellent (used), Year of construction: 2011, year of last overhaul: 2025, Stürtz Production Line for Fully Automatic Manufacturing of PVC Window and Door Elements Four-Head Welding Machine SE-HSM-30/26 Compact + - Weld bead limitation 2.0mm (0.2mm possible) - Diagonal and parallel joining processes - Gasket limitation and holding stamp - Quick-change system for stamps - Welding parameters individually programmable - Min. welding dimension: 330 x 340mm - Max. welding dimension: 4000 x 2600mm (2600mm in feed direction) - Profile depth min.: 40mm - Profile depth max.: 120mm - Door welding with simultaneous threshold installation possible during the welding cycle - Screen dialog system - Windows operating system - PC with TFT monitor - USB ports - Keyboard and mouse - Data management via database Horizontal Buffer Station P-260-WST - For cooling section and transport - Working area: 3000 x 2300mm Fsdpfxsx Rpyuo Afnepc - Element size min.: 320 x 320mm - Element size max.: 3000 x 2600mm - Max. element weight: 80kg Corner Cleaning Machine 2MC; CNC Motion Control for processing 90° inner and outer corners on welded plastic windows - 2-axis drive 'Motion Control' - Freely programmable via screen-dialog control - Automatic profile recognition - Screen dialog system - PC with TFT monitor - USB ports - Keyboard and mouse - Data management via database Profile dimensions: - Profile depth 30 – 130mm - Visible width 30 – 130mm - Min. element size: 320 x 320mm (clear internal dimension 180mm) - Automatic compensating support, 60mm travel, for centering combined welded frames or sashes - Frame tip milling unit for trimming protruding frame corners and milling locking grooves - Corner hinge drilling unit for drilling the dowel holes and screw holes with 6-spindle drilling head - Drilling pattern: Winkhaus activ-pilot-concept - Outer contour processing with saw blade - Milling disc for processing rounded sash overlaps, for Trocal 88+ Z-sash Top tool holder equipment - Gasket groove drilling and milling unit - Inner corner knife unit - Groove knife (visible side) Bottom tool holder equipment - Gasket groove drilling and milling unit - Inner corner knife unit - Groove knife (visible side) - Bevel punching unit bottom - Double spring-mounted, for removing welding beads from inner corners >15° - 1x for Elite (45°) - 1x for Knipping and Trocal 88+ (40°) - 1x for Inoutic NL profiles - Contour knife unit for radii - Disc milling unit for processing radii on foiled or acrylic-coated inner corners, spring-mounted - Chip conveyor belt with extraction device