Pull stud/ tool holder

SHW

Condition: good (used), Year of construction: 1988, feed length X-axis: 1,000 mm, feed length Y-axis: 700 mm, feed length Z-axis: 600 mm, 5-axis machine Feed rate stepless: 2-4000 Kdjdpszd Dbqsfx Anwon Total power requirement: 20 kW Machine weight approx.: 7 t Space requirement approx.: 7 linear meters

Condition: used, Year of construction: 2004, HURCO VMX 64 X-axis travel: 1625 mm Y-axis travel: 865 mm Z-axis travel: 760 mm CNC control: Ultimax 4 table size: 1680 x 890 mm max. table load: 2000 kg spindle taper: SK 40 Kdsdpfx Aewyna Senwen rapid traverse x/y/z: 18 / 18 / 13 m/min drive capacity – spindle motor: 15 kW tool magazine: 40 positions max. spindle speed: 10,000 rpm machine fully operational

Condition: used, Year of construction: 2007, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, table width: 5,500 mm, table length: 2,600 mm, total height: 4,900 mm, total width: 16,200 mm, total length: 9,000 mm, overall weight: 55,100 kg, CNC Floor Type Bed Milling Machine CNC Control Heidenhain iTNC 530 Controlled NC Table 1600 x 1600 mm Table dimensions 5500 x 2600 mm Movement X-axis 8000 mm Movement Y-axis 2100 mm Kdedjza Egnspfx Anwjn Movement Z-axis 1300 mm Movement W-axis 1000 mm C-axis-swivel of milling head body 360 ° A-axis-swivel of milling head 180° Spindle speed 36 - 6.000 R/min Spindle motor 42 / 30 kW Spindle taper DIN 69871-SK 50 Tools in tool magazine 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 1995, functionality: fully functional, SHW UF 31, year of manufacture 1995, Heidenhain TNC 415 B control, travel X/Y/Z 1000/700/625 mm, feed rate X/Y/Z 2,000 mm/min, rapid traverse X/Y 4,000 mm/min, rapid traverse Z 2,000 mm/min, rotary table feed up to 4 rpm, main drive 20 kW, tool holder SK 50, programmable milling head, swivel time horizontal/vertical 6 sec, NC rotary table, spindle speed stepless up to 2,500 rpm, spur gearing, milling head swivels +/- 90°, quill manual 115 mm, quill motorized 100 mm, electronic handwheel, connected load 35 kW, milling spindle bearings replaced in 2025. Kodeyx Un Tepfx Anwedn

Condition: new, pressure 20 t stroke 180 mm daylight between the columns 540 x 100 mm dayligth max. 990 mm Ksdpfx Aoupxc Tsnwjdn 72 mm diameter of piston 48 mm weight of the machine ca. 0,12 t dimensions of the machine ca. 0,8 x 0,7 x 1,8 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents

Condition: used, Year of construction: 1977, Technical details: x-travel: 1050 mm y-travel: 500 mm z-travel: 500 mm spindle taper ISO: SK40 spindle head swivable left - right: 90 ° quill travel: 180 mm range of revolution per miute: 36 - / 18 step U/min Kdedpfxsu Ndd Re Anwjn feed:: X+Z: mm/min feed:: Y: - 900 mm/min. rapid traverse : X/Z: / Y: 900 mm/min table surface area: 1200 x 550 mm total power requirement: ca. 10 kW machine weight approx.: 4400 kg dimension machine xH: 3,1 x 2,5 x 2,2 m Console design with tilting, tilting and swiveling table, as well as adjustable vertical milling head. Machine with 3-axis digital readout (with resolution 0.01mm) with feed and individual drive of all three axes stepless feed X-axis: Support lengthwise = 700mm; univ. milling table lengthwise 350mm = total lengthwise: 1050mm Accessories: Comparable with the pictures *

Condition: excellent (used), Year of construction: 2002, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,100 mm, travel distance Z-axis: 1,600 mm, spindle speed (max.): 3,500 rpm, Machine parameters – see photo. X-axis – 5000 mm Kdedpfey U Ngvox Anwen Y-axis – 3100 mm Z-axis – 1600 mm Control system: Siemens 840 D.

Condition: used, length 805 mm width 510 mm height 100 mm base area . mm total power requirement . kW weight of the machine ca. . kg Kdjdpfx Aneyqtlajwsn dimensions of the machine ca. . m Magnetic clamping plate electric with cable The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale; our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1984, x-travel 2500 mm y-travel 750 mm z-travel 1000 mm table surface area 2550 x 800 mm Kdodpfx Ajtqqnwjnwen spindle taper SK 50 control HEIDENHAIN, TNC 150 B weight of the machine ca. 16 t

Year of construction: 2008, operating hours: 12,897 h, condition: ready for operation (used), travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,600 mm, overall weight: 34,000 kg, total width: 11,000 mm, total height: 6,450 mm, product length (max.): 12,500 mm, spindle speed (max.): 2,500 rpm, tool weight: 25,000 g, number of axes: 5, This 5-axis SHW UFZ 6L Bed Type Milling Machine was manufactured in 2008. It features an impressive X-axis travel of 6000 mm, Y-axis travel of 2100 mm, and Z-axis travel of 1600 mm. The machine includes an automatic tool changer with a capacity for 150 tools and a robust clamping plate surface of 3600 x 3750 mm. If you are looking to get high-quality milling capabilities, consider the SHW UFZ 6L machine we have for sale. Contact us for further details. Spindle operating time: 12,897 hoursHydraulic operating time: 43,912 hours • W-axis travel: 1500 mm • Digital feed drives • X-axis: 2–20000 mm/min • Y-axis: 2–24000 mm/min • Z-axis: 2–24000 mm/min • Rapid traverse • X-axis: 20000 mm/min • Y-axis: 24000 mm/min • Z-axis: 24000 mm/min • Spindle • Head: Automatic universal milling head • Main spindle motor: Siemens 1PH7 167 • Gearbox: ZF 2K300 / SEW FF37 / FA47 B / KA Z37 • Repeatability: ±0.002 mm • Spindle Speed (60 min Max): 3200 rpm • Spindle Speed (15 min Max): 4000 rpm • Tool changer • Type: Automatic • Capacity: 150 tools • Max tool length: 400 mm • Max tool weight: 25 kg • Tool taper: SK50 DIN 69871 • Station: Pickup-station • Table/plates • Clamping plate surface: 3600 x 3750 mm • Electronics and control • Control panel: Integrated CNC in work platform • Servo motors: Siemens 1FT6 series • Drives/regulators: Indramat ECOdrive 3 • Measuring systems: Heidenhain LS 186C / LB 382C / ROD 480 / ROQ 425 • Electronic pressure switch: ifm PN 5, PN 7 • Power supply • Voltage: 400 V, 3-phase, 50 Hz • Power connection: approx. 80 kVA • Main fuse: 160 A (slow-blow) • Conductor cross-section: 70 mm² • Pneumatics and hydraulics • Pressure: 4–6 bar • Connection: G1/4 • Air consumption: approx. 320–400 l • Valve terminal: Festo CP10+ • Hydraulic system: Bosch with 1 x 50 l accumulator Kjdpsy Nzdcjfx Anwodn Additional equipment • CNC rotary table unit: Demmeler DRTN • Table surface: 2000 x 1800 mm • Max rotation speed: 4 min^-1 • Collision monitoring: Brankamp Typ CMS (1-channel) • Safety brake: Mayr Typ 891... • Cooling unit: Schimpke DK 38 V / BKW SK 250D • Coolant filter: Knoll KF110/1100 • Oil filter: ARGO D 062-156 • Chip conveyor: Richter SP 250/63 (x2) • Measurement system: m&h 20.10 Set Multi SK50 / m&h 35.10 TS plug • Lubrication: Automatic • Machine enclosure: 3-sided Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2011, Technical details: measuring range X-axis: Länge: 0 - 160 mm measuring range Y-axis: Höhe: 0 - 425 mm Tool table: Auflage: Ø 95 mm tool taper: SK 50 tool taper: drehbar 360° weight: 12 kg dimension L-W-H: 420 x 165 x 775 mm This is a bench top unit. Application: Alignment of rotary milling tools. Measuring method: manual alignment with/via digital display Measuring bar manually movable Kdodpfx Aeu N Artonwon Measuring beam transverse (X) 160mm and vertical (Y) 425mm movable with measuring sensor Measuring display: both axes digital, voltage 1.5 V (AA battery) *

Condition: used, Year of construction: 2002, x-travel 16300 mm y-travel 2600 mm z-travel 1600 mm Control Heidenhain type TNC 430 tool taper ISO 50 spindle turning speed range 22-4000 U/min feed in x - axis 36000 mm/min feed in y - axis 24000 mm/min Kedpeyq Swuefx Anwodn feed range Z-direction 24000 mm/min main drive motor 37 kW Tool changer 90 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 750 mm, table width: 1,500 mm, table length: 850 mm, rotational speed (max.): 2,500 rpm, quill stroke: 120 mm, SHW UF 5 Travels - X-axis (rotary table): 1,500 mm - Y-axis (vertical headstock): 1,000 mm - Z-axis (horizontal headstock): 750 mm Kdsdpovfm I Tsfx Anwon Control system - CNC control: Heidenhain TNC 355 Automatic swivel head (change between horizontal and vertical machining) Quill 120mm Milling spindle holder SK 50 Speed 2500 rpm Partial overhaul 2014 - Year of construction 1990 - Inspection/repair 2025 Table assembly - Travel distance: X = 1,500 mm - Clamping surface: 1,500 x 800 mm Chip conveyor Splash guard cabin We have ALL spare parts for this series (SHW UF 5) in stock! About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is in the field of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization _____ Used machine - used milling machine - used bed type milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - milling machine used - milling machine used - CNC milling machine used - drilling milling machine used - milling machine metal used - metal milling machine used - metal milling machine used metal milling machine used - used cnc milling machine - cnc milling machines - cnc milling machines - milling machine - large part machining - large part machining - large part machining - cnc large part machining - milling - shw - uf5 - uf 5 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 5 - UFZ 5 - UFZ5L - UFZ 5 L - MBM Milling Machine - MBM Machine

Condition: used, length 700 mm width 500 mm height 105 mm weight 260 kg The electro-magnetic clamping plate is in good, ready-to-use condition. Length: 700mm Kodjwth Trepfx Anwsdn Width: 500mm Height: 105mm Weight: 260kg We have two identical magnetic chucks with the same dimensions. See S9064

Condition: excellent (used), Year of construction: 2016, SHW UF 5 Travels - X-axis (rotary table): 1,500 mm - Y-axis (headstock vertical): 1,300 mm - Z-axis (headstock horizontal): 750 mm Control system - CNC control: Siemens 3 M Conversion to Heidenhain TNC 415 possible Automatic swivel head (change between horizontal and vertical machining) quill 120mm Milling spindle holder SK 50 speed 2500rpm Year of manufacture 1994 - 2016 general overhauled Stepless NC rotary table - Rückle PKTF 55 - Clamping surface: 1500 x 1250 mm Kdodpfxeh Rh T Ho Anwon About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main focus is in the area of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - spare parts - after-sales service - machine service - machine overhauls - Control system modernization