Control unit

SEW R17 DR63S4/BR/TF 0,12kW Bremse V 220-266 Ac SN: 01.7389636401.0002.16

Condition: ready for operation (used), DRUM MOTORS drum motors used Ljdpfx Aei A Apusa Eoak large stock of belt width 300-1400 mm

Condition: good (used), Year of construction: 1972, turning diameter over bed 330 mm turning diameter over slide rest 200 mm turning length 800 mm total power requirement 3 kW weight of the machine ca. 800 kg dimensions of the machine ca. 1,9x0,7x1,2 m turning speed range 24-2800 U/min Lodjwwl Izjpfx Aa Eeak

Condition: good (used), Machine 1 pictures 1-5 Alzmetall AB 40 SV Price 9500,-€ drilling capacity : 45mm Spindle : MK 4 Drilling capacity 45mm Spindle MK 4 Speed 65-1750 rpm Feed Yes 0.1 - 0.2 - 0.3 Drilling stroke 165mm Connection 50Hz 380V Motor 2,4KW Machine weight approx. 500kg Machine 2 pictures 6-12 Weipert SBM 49 Price 4.250,-€ drilling capacity 40mm table 560x560mm quill stroke 180mm Spindle MK 4 Speed 50-1450 rpm Steps 12 Ljdpou Nm Tbofx Aa Eoak Feed rate 0.1-0.2 H8Vxu2W Spindle table 770mm throat 350 mm Motor 1.5 KW Thread cutting device pictures 13-16 Gillardon GB 40 VE Price 3.690,-€ Year of construction: ca.1988 L x W x H: approx.630x985x2020mm Weight: approx. 620kg Drilling capacity ( steel ): approx.40mm Drilling capacity ( cast iron ): approx.50mm Tapping capacity: M27-M33 Tool holder: MK4 Speed range, stepless: 60-1600 rpm Table clamping surface: approx. 640x530mm Feed range: approx. 0.1;0.16;0.25 mm/rev

Year of construction: 2023, condition: ready for operation (used), Two Vecoplan scraper chain conveyors are available. 1) VKU 800, year of construction: 2023, drive power: 5.5kW, belt speed: 24m/min, conveying capacity: approx. 120m³/h, belt width: 820mm, max. incline: 70°, section length: 10.2m. 2) VKU 1100, year of construction: 2023, drive power: 11kW, belt speed: 24m/min, conveying capacity: 180m³/h, belt width: 1150mm, max. incline: 70°, section length: 22mm. Documentation available. On-site inspection is possible. Lodpfot Iw Ryex Aa Eeak

Condition: good (used), Year of construction: 1961, turning diameter over bed 700 mm turning diameter over slide rest 460 mm Lodpferu Aymjx Aa Ejak turning length 1800 mm spindle bore 90 mm dimensions of the machine ca. 5,4x2x1,9 m total power requirement 32,1 kW

Condition: used, Year of construction: 1987, Column Drilling Machine Manufacturer: ALZMETALL Model: AB 3/ES Year of manufacture: 1987 - workshop tested Lajdpfx Aaew Id Uae Eek Machine no.: 23348 Standard features: - Infinitely variable speed control from 260 to 3,500 rpm - Analog speed display - Operating manual Other important technical data: - 28 mm drilling capacity in ST 60 - 160 mm quill travel - Spindle taper MK 3 - 115 mm column diameter - 500 x 300 mm table dimensions

Condition: used, Gearbox, bevel gear, worm gear -Gearbox: Worm gear ratio: i = 7.5 -Shafts: Ø 14 x 34 mm / see photos -Dimensions: 122/105/H140 mm -Weight: 4.2 kg Lodpfxet Snw So Aa Esak

Condition: ready for operation (used), Year of construction: 1996, The item of my auction is a conveyor belt with a length of 10.5 m and a belt width of 0.65 m. Possibility of transport. Lodpfxew Dx Sye Aa Esak

Condition: used, Year of construction: 1978, bore capacity in steel (diameter) 28 mm throat 290 mm bore stroke 180 mm table surface area 515 x 300 mm Lajdpewk N Raefx Aa Eek spindle taper MT 3 spindle turning speed range 65 - 1750 U/min boring spindle diameter 40 mm table adjustable in height 562 mm table swivelable 360 ° distance between table/spindle 79 / 641 mm weight of the machine ca. 0,4 t dimensions of machine L x W x H 0,70 x 0,40 x 1,80 m - machine out of teaching shop -

Condition: used, Gears, spur gears, angular gears, worm gears -Gear: Worm gear, unfortunately unused without type designation -Translation: i = 40 -Hollow shaft: Ø 11 x 23 mm / 14 x 67 mm Laodpfsp Udilsx Aa Esk -Hole circle: Ø 87 x 9 mm -Quantity: 3x gears available -Price per piece -Dimension: 100/100/H115 mm -Weight: 1.2 kg