Frequency converter 5,5 kW

SEW-EURODRIVE Movitrac 31C055-503-4-00

Condition: like new (used), Rotary vane bacuum pump in oil bath. Available in stock. Completely overhauled pump. With warranty. Nominal flow: 300 m3 / h at 50Hz. Final vacuum: 0,1 mbar abs. Any clarification, do not hesitate to contact us. Nwodpfjftzzgox Aa Eer

Condition: good (used), Year of construction: 2014, operating hours: 50,114 h, functionality: fully functional, machine/vehicle number: 120689, pressure: 0.5 bar, control cabinet height: 540 mm, control cabinet length: 780 mm, control cabinet width: 230 mm, power: 1,111 kW (1,510.54 HP), temperature: 110 °C, operating temperature: 107 °C, total height: 28,310 mm, total length: 37,930 mm, total width: 20,470 mm, insulation thickness: 100 mm, empty load weight: 3,319 kg, Steam boiler BOSCH U-ND 2000 x 0,5 bar (Low pressure boiler) for capacity 1600kg/h, with gas Weishaupt burner WM-G20/2-A ZM-LN. Available in January 2025. Nodpfx Aastx T Nhe Ejwr

Condition: good (used), Heavy duty high pressure washer. Two motors - 90kW + 1,5kW Machine was used for few hours and then stored at the warehouse. Delivery is available. Nodpsh Rkilofx Aa Eowr

Condition: used, Hydraulic scissor lift table GRUSE type ELS 0.5-8-1-G-SO Make No.: 124984 Year of construction 2017 lifting capacity 300 kg platform size 1250 x 800 mm useful stroke max. 785 mm Overall height - table bottom 345 mm Overall height - table top 1130 mm Motor power 0,8 kW Mains connection 400 Volt, 50 Hz - foot switch for up and down, with emergency stop and key switch for control on - single shear with one lifting cylinder Njdsixq Hnopfx Aa Eewr - revolving safety contact strip with limit switches under the upper frame - adjustable limit switch for the upper lifting restriction - Table top with sturdy wooden worktop and airliner rails with lashing eyes - hydraulic power unit with tank mounted under the table - feet under the table corners, mobile with lift truck own weight 250 kg very good condition, almost as new

Condition: new, With the Brugger Power Split S22, we present a powerful vertical log splitter with an impressive splitting force of 22 tons. This robust machine is ideal for a wide range of applications and offers maximum drive flexibility - whether via the electric motor or the PTO shaft. The splitting process takes place at two speeds, which enables the wood to be processed quickly and efficiently. Special features: - 22T splitting pressure - Combined drive: 5kW electric motor & PTO drive - Weight: 335kg - up to 110cm log length - Log lifter - Two speeds A log lifter is included in the scope of delivery to facilitate the handling of heavy logs. A hydraulic cable winch is available as an option, which offers additional application options and makes work even easier. With a maximum splitting length of 110 cm, the Brugger Power Split S22 offers the flexibility to process even larger pieces of wood with ease. A support table for shorter pieces of wood is also available. The Brugger Power Split S22 is the ideal choice for anyone looking for a reliable and powerful solution for splitting wood - whether for professional or private use. Prices: Power Split S22 = 2.670€ Support table for short logs = 125€ 4 compartment splitting wedge = 99€ Hydraulic cable winch = 595€ Nwedpfjtpw R Tsx Aa Eor Contact us for your customized offer!

Condition: excellent (used), Feutron Type: 3702/06 Water-cooled climatic test chamber Technical data: Test chamber nominal volume 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width 2970 mm Height 2370 mm Depth 1530 mm Rear wall Minimum insertion dimensions: Width 2970 mm Height 2390 mm Depth 1550 mm Test chamber: Width 2000 mm Height 1000 mm Depth 1000 mm Double-leaf door, clear width Width 2000 mm Height 1000 mm Heated viewing window, 2 pieces Width 500 mm Height 600 mm Feed-through opening, 1 side panel left ∅ 75 mm Temperature range: -40...100°C Climatic range: 10...95°C Temperature difference, temporal ≤ ± 0.5...± 1.0 ΔN/K Change rates measured in the supply air without load Nodpsk E Hnqefx Aa Eowr Cooling up to 2.0 on average K/min Heating up to 2.0 on average K/min Humidity range: 10...95 %r. F. Humidity difference, temporal ≤ ± 3.0 %r. F. Dew point range, temporary down to -5... 95°C Refrigeration system: water-cooled semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Air conditioning and dryer refrigeration system air-cooled /hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical mains connection: 400V 3/N/PE.AC,50Hz Mains plug: CEE 5-роlig, 32 A, with 5.0 m cable Max. simultaneous power requirement 10.0 kW Supply line fuse: 3x 25, Char, C A Degree of protection IP20 Weight: 1300 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), White Type: WK1-1000/70 Weiss climatic test chamber water-cooled (refrigerant converted to R-452A) Touch panel" control unit All control and operating commands can be triggered by simply touching the function icons on the all control and operating commands by simply touching the function icons. Feedthroughs The test chamber is equipped with feed-throughs on the right and left side. Measurement cables and test equipment can be routed into the test chamber through these. Feed-throughs: 1 feed-through ∅ 125 mm installed on the right 1 feed-through ∅ 50 mm installed on the left Volume 990 liters Test chamber dimensions: Test chamber: width 1100 mm, depth 950 mm, height 950 mm Housing: width 1385 mm, depth 1850 mm, 1980 mm Data for temperature tests: Minimum temperature -70 °C Maximum temperature +180 °C Temperature deviation, temporal ± 0.1 to ± 0.5 K Temperature homogeneity, spatial ± 0.5 to ± 2 K Temperature change rate, heating 4 K/min Temperature change rate, cooling 2.5 K/min Max. heat compensation 2750 W Data for climate tests: Temperature range +10°C to +95°C Humidity range 10 to 98% r.h. Temperature deviation, temporal ± 0.1 to ± 0.3 K Temperature homogeneity, spatial ± 0.5 to ± 1 K Humidity deviation, temporal ± 1 to ± 3% r.h. Data for operation: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Nominal current: 29A Nominal power 19.8 kW Nwjdpfx Aajrvx Ezs Eor Refrigerant: R-452A/ R23 Weight approx. 910kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 1991, round bar steel 35 mm square edge steel 32 mm L-beam 120 x 12 mm flat steel 400 x 16 / 200 x 20 mm punching pressure 60 t stroke 10 - 27,5 mm Nwodpev Hti Tjfx Aa Eer throat 410 mm punch diameter 27 in 17 mm total power requirement 7,5 kW weight of the machine ca. 2000 kg dimensions of the machine ca. 1800 x 800 x 1800 mm Equipment: - Notcher, hole punch, flat steel blade, angle steel blade - Stop table on hole punch + notcher - Contact stop 1000 mm - 2x foot switches - Operating instructions

Year of construction: 1998, condition: used, vacuum pump central BUSCH RC 0250, 5 kW, year: 1998, price: 2.500 €, contact: Herr Rainer Eckerle Nwedpfx Aew Swiea Esr

Condition: excellent (used), Weiss temperature test chamber Here we offer a temperature test chamber. Weiss temperature test chamber water cooled Technical data: Test cabinet designation: WT-600/70 Outer dimensions with hinges and door lock height 1995 mm, width 1090 mm, depth 1660 mm Outer dimensions without hinges and door lock height 1995 mm, width 1000 mm, depth 1660 mm Internal dimensions: Height 950 mm, width 800 mm, depth 800 mm Test chamber capacity: approx. 600 liters cold / heat operation -70°C to 180°C Temperature change per time cooling approx. 2.5 K/min Heating up approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Fuse on site: 32 A slow blow Permissible test material weight Total load of grate supports 80kg Nsdpfx Aaoiqk Abe Eewr test chamber floor 80kg, insert grate 40kg Refrigerant: R 404A/R23 Weight: 675kg Type: WT-600/70 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.